&ANALYZE-SUSPEND _VERSION-NUMBER UIB_v8r12 &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Check Version Notes Wizard" Procedure _INLINE /* Actions: af/cod/aftemwizcw.w ? ? ? ? */ /* MIP Update Version Notes Wizard Check object version notes. af/cod/aftemwizpw.w */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Update-Object-Version" Procedure _INLINE /* Actions: ? ? ? ? af/sup/afverxftrp.p */ /* This has to go above the definitions sections, as that is what it modifies. If its not, then the definitions section will have been saved before the XFTR code kicks in and changes it */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Definition Comments Wizard" Procedure _INLINE /* Actions: ? af/cod/aftemwizcw.w ? ? ? */ /* Program Definition Comment Block Wizard Welcome to the Program Definition Comment Block Wizard. Press Next to proceed. af/cod/aftemwizpw.w */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _DEFINITIONS Procedure /********************************************************************* * Copyright (C) 2000 by Progress Software Corporation ("PSC"), * * 14 Oak Park, Bedford, MA 01730, and other contributors as listed * * below. All Rights Reserved. * * * * The Initial Developer of the Original Code is PSC. The Original * * Code is Progress IDE code released to open source December 1, 2000.* * * * The contents of this file are subject to the Possenet Public * * License Version 1.0 (the "License"); you may not use this file * * except in compliance with the License. A copy of the License is * * available as of the date of this notice at * * http://www.possenet.org/license.html * * * * Software distributed under the License is distributed on an "AS IS"* * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. You* * should refer to the License for the specific language governing * * rights and limitations under the License. * * * * Contributors: * * * *********************************************************************/ /*--------------------------------------------------------------------------------- File: afasconmgrp.p Description: AppServer Service Type Manager Purpose: AppServer Service Type Manager This procedure is the service type manager for AppServers. Parameters: History: -------- (v:010000) Task: 0 UserRef: Date: 08/22/2001 Author: Update Notes: Created from Template afsrvconmgrp.p (v:010001) Task: 90000132 UserRef: Date: 14/05/2001 Author: Bruce Gruenbaum Update Notes: fixes --------------------------------------------------------------------------------*/ /* This .W file was created with the Progress UIB. */ /*-------------------------------------------------------------------------------*/ /* *************************** Definitions ************************** */ /* MIP-GET-OBJECT-VERSION pre-processors The following pre-processors are maintained automatically when the object is saved. They pull the object and version from Roundtable if possible so that it can be displayed in the about window of the container */ &scop object-name afasconmgrp.p DEFINE VARIABLE lv_this_object_name AS CHARACTER INITIAL "{&object-name}":U NO-UNDO. &scop object-version 000000 /* Astra object identifying preprocessor */ &glob AstraProcedure yes /* Connection Manager specific Preprocessors */ &SCOPED-DEFINE ServiceType AppServer &SCOPED-DEFINE RequiresHandle YES /* &SCOPED-DEFINE ServiceTypeFields */ /* &SCOPED-DEFINE ServiceTypeIndexes */ /* This tool replaces the AS-UTILS tool that was available in the standard AppBuilder */ {adecomm/appsrvtt.i "NEW GLOBAL"} {adecomm/_adetool.i} /* The following variable is cut and pasted from the Progress standard adecomm/appserv.i file. The variable contains the handle to AppServer Utility procedure in the standard Progress code (as-utils.w) but we need to be able to completely replace that API here so we define the global variable at this point and assume that the configuration file will have a setting that will change it */ DEFINE NEW GLOBAL SHARED VARIABLE appSrvUtils AS HANDLE NO-UNDO. DEFINE VARIABLE hDynUser AS HANDLE NO-UNDO. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-PREPROCESSOR-BLOCK /* ******************** Preprocessor Definitions ******************** */ &Scoped-define PROCEDURE-TYPE Procedure &Scoped-define DB-AWARE no /* _UIB-PREPROCESSOR-BLOCK-END */ &ANALYZE-RESUME /* ************************ Function Prototypes ********************** */ &IF DEFINED(EXCLUDE-definedPartitions) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD definedPartitions Procedure FUNCTION definedPartitions RETURNS CHARACTER ( /* parameter-definitions */ ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getASConnectString) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD getASConnectString Procedure FUNCTION getASConnectString RETURNS CHARACTER ( BUFFER bAppSrvTT FOR AppSrv-TT ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getJMSPartitions) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD getJMSPartitions Procedure FUNCTION getJMSPartitions RETURNS CHARACTER ( /* parameter-definitions */ ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getJMSPtnInfo) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD getJMSPtnInfo Procedure FUNCTION getJMSPtnInfo RETURNS CHARACTER ( INPUT cPartition AS CHARACTER ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getPartitionsByType) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD getPartitionsByType Procedure FUNCTION getPartitionsByType RETURNS CHARACTER ( INPUT cType AS CHARACTER ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-isConnected) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD isConnected Procedure FUNCTION isConnected RETURNS LOGICAL ( INPUT pcServiceName AS CHARACTER ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-parseConnectionParams) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD parseConnectionParams Procedure FUNCTION parseConnectionParams RETURNS CHARACTER (INPUT pcParams AS CHARACTER ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF /* *********************** Procedure Settings ************************ */ &ANALYZE-SUSPEND _PROCEDURE-SETTINGS /* Settings for THIS-PROCEDURE Type: Procedure Allow: Frames: 0 Add Fields to: Neither Other Settings: CODE-ONLY COMPILE */ &ANALYZE-RESUME _END-PROCEDURE-SETTINGS /* ************************* Create Window ************************** */ &ANALYZE-SUSPEND _CREATE-WINDOW /* DESIGN Window definition (used by the UIB) CREATE WINDOW Procedure ASSIGN HEIGHT = 23 WIDTH = 55.4. /* END WINDOW DEFINITION */ */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _INCLUDED-LIB Procedure /* ************************* Included-Libraries *********************** */ {af/sup2/afsrvtype.i} /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _MAIN-BLOCK Procedure /* *************************** Main Block *************************** */ ON CLOSE OF THIS-PROCEDURE RUN plipShutdown. RUN initializeSelf. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME /* ********************** Internal Procedures *********************** */ &IF DEFINED(EXCLUDE-appServerConnect) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE appServerConnect Procedure PROCEDURE appServerConnect : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE INPUT PARAMETER partition_name AS CHARACTER NO-UNDO. DEFINE INPUT PARAMETER security_prompt AS LOGICAL NO-UNDO. DEFINE INPUT PARAMETER app_server_info AS CHARACTER NO-UNDO. DEFINE OUTPUT PARAMETER conn-hdl AS HANDLE NO-UNDO. DEFINE VARIABLE cHandle AS CHARACTER NO-UNDO. IF isConnected(partition_name) THEN DO: conn-hdl = WIDGET-HANDLE(DYNAMIC-FUNCTION('getServiceHandle':U IN THIS-PROCEDURE, INPUT partition_name)). RETURN. END. RUN connectService IN THIS-PROCEDURE (partition_name, OUTPUT cHandle) NO-ERROR. IF RETURN-VALUE <> "":U THEN DO: MESSAGE "Attempt to connect a partition named" partition_name + "." SKIP "The following errors were generated by Progress:" SKIP RETURN-VALUE VIEW-AS ALERT-BOX ERROR. RETURN "ERROR". END. conn-hdl = WIDGET-HANDLE(cHandle). END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-appServerDisconnect) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE appServerDisconnect Procedure PROCEDURE appServerDisconnect : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE INPUT PARAMETER partition_name AS CHARACTER NO-UNDO. /* Just return... The AppServer should only be disconnected via disconnectService -- see IssueZilla 1847 */ RETURN. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-connectService) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE connectService Procedure PROCEDURE connectService : /*------------------------------------------------------------------------------ Purpose: Connects a physical service for a given service name Parameters: Notes: This procedure is a required entry point for the Connection Manager. ------------------------------------------------------------------------------*/ DEFINE INPUT PARAMETER pcServiceName AS CHARACTER NO-UNDO. DEFINE OUTPUT PARAMETER pcHandle AS CHARACTER NO-UNDO. DEFINE VARIABLE cConnectString AS CHARACTER NO-UNDO. DEFINE VARIABLE cUserName AS CHARACTER NO-UNDO. DEFINE VARIABLE cPassword AS CHARACTER NO-UNDO. DEFINE VARIABLE lRunLocal AS LOGICAL NO-UNDO. DEFINE VARIABLE hServer AS HANDLE NO-UNDO. DEFINE VARIABLE lAns AS LOGICAL NO-UNDO. DEFINE VARIABLE lDefault AS LOGICAL NO-UNDO. DEFINE VARIABLE cAppServerInfo AS CHARACTER NO-UNDO. DEFINE VARIABLE cSessionType AS CHARACTER NO-UNDO. DEFINE VARIABLE cPhysSessType AS CHARACTER NO-UNDO. /* cAppServerInfo contains several parameters in a string. This string is passed as the AppServerInfo parameter in the connect method so that the as_connect.p procedure can parse these values out for use by the AppServer. */ cPhysSessType = DYNAMIC-FUNCTION("getPhysicalSessionType":U IN THIS-PROCEDURE). IF cPhysSessType = ? THEN cPhysSessType = "?":U. cAppServerInfo = "VER:2.1A":U + CHR(3) + cPhysSessType + CHR(3) + SESSION:NUMERIC-SEPARATOR + CHR(3) + SESSION:NUMERIC-DECIMAL-POINT + CHR(3) + SESSION:DATE-FORMAT + CHR(3) + STRING(SESSION:YEAR-OFFSET) + CHR(3). cSessionType = DYNAMIC-FUNCTION("getSessionParam":U IN THIS-PROCEDURE, "ICFSESSTYPE":U). IF cSessionType = ? THEN cSessionType = "?":U. cAppServerInfo = cAppServerInfo + cSessionType + CHR(3). lDefault = DYNAMIC-FUNCTION("isDefaultService":U IN THIS-PROCEDURE, INPUT pcServiceName ). IF lDefault AND gscSessionID <> "":U AND gscSessionID <> ? THEN cAppServerInfo = cAppServerInfo + gscSessionID. {aficfcheck.i} /* Get the connection parameters */ cConnectString = DYNAMIC-FUNCTION("getConnectionString":U IN THIS-PROCEDURE, INPUT pcServiceName ). IF cConnectString = ? THEN RETURN "INVALID CONNECTION STRING":U. lRunLocal = cConnectString = "":U. IF NOT lRunLocal THEN lRunLocal = DYNAMIC-FUNCTION("getSessionParam":U IN THIS-PROCEDURE, "run_local":U) = "YES":U. IF lRunLocal THEN DO: pcHandle = STRING(SESSION). DYNAMIC-FUNCTION("setServiceHandle":U IN THIS-PROCEDURE, pcServiceName, pcHandle). RETURN. END. IF isConnected(pcServiceName) THEN RUN disconnectService (pcServiceName). /* Connect to the AppServer with a generated user name and password */ cUserName = DYNAMIC-FUNCTION("generateUserName":U IN hDynUser). cPassword = DYNAMIC-FUNCTION("createPassword":U IN hDynUser, cUserName). /* Now create the server and connect it */ CREATE SERVER hServer. lAns = hServer:CONNECT(cConnectString,cUserName,cPassword,cAppServerInfo) NO-ERROR. IF ERROR-STATUS:ERROR OR ERROR-STATUS:NUM-MESSAGES <> 0 OR lAns <> YES THEN RETURN DYNAMIC-FUNCTION('buildErrorList':U IN THIS-PROCEDURE). pcHandle = STRING(hServer). DYNAMIC-FUNCTION('setServiceHandle':U IN THIS-PROCEDURE, INPUT pcServiceName, INPUT pcHandle). IF lDefault = YES THEN DO: gshAstraAppServer = hServer. gscSessionID = hServer:CLIENT-CONNECTION-ID. END. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-disconnectService) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE disconnectService Procedure PROCEDURE disconnectService : /*------------------------------------------------------------------------------ Purpose: This procedure is responsible for disconnecting a physical service. Parameters: Notes: This procedure is a required entry point for the Connection Manager. ------------------------------------------------------------------------------*/ DEFINE INPUT PARAMETER pcServiceName AS CHARACTER NO-UNDO. DEFINE VARIABLE hServer AS HANDLE NO-UNDO. DEFINE VARIABLE lAns AS LOGICAL NO-UNDO. DEFINE VARIABLE lDefault AS LOGICAL NO-UNDO. /* Get the handle to the AppServer */ hServer = WIDGET-HANDLE(DYNAMIC-FUNCTION('getServiceHandle':U IN THIS-PROCEDURE, INPUT pcServiceName)). IF NOT VALID-HANDLE(hServer) OR hServer = SESSION:HANDLE THEN RETURN. lDefault = DYNAMIC-FUNCTION("isDefaultService":U IN THIS-PROCEDURE, INPUT pcServiceName ). IF hServer:CONNECTED() THEN hServer:DISCONNECT(). DELETE OBJECT hServer. DYNAMIC-FUNCTION('setServiceHandle':U IN THIS-PROCEDURE, INPUT pcServiceName, INPUT ?). IF lDefault = YES THEN gshAstraAppServer = ?. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-initializeSelf) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE initializeSelf Procedure PROCEDURE initializeSelf : /*------------------------------------------------------------------------------ Purpose: Parameters: Notes: ------------------------------------------------------------------------------*/ appSrvUtils = THIS-PROCEDURE. /* Get the handle to af/app/afddo.p - ICF is not running so we can't get this from the Session manager. The function "getProcedureHandle" lives in the Configuration File Manager which is a SESSION super procedure */ RUN startProcedure IN THIS-PROCEDURE ("ONCE|af/app/afdynuser.p":U, OUTPUT hDynUser) NO-ERROR. /* If the handle to hDynUser is invalid, then start it. */ IF NOT VALID-HANDLE(hDynUser) THEN RUN "af/app/afdynuser.p":U PERSISTENT SET hDynUser. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-loadPartitionInfo) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE loadPartitionInfo Procedure PROCEDURE loadPartitionInfo : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Parameters: Notes: ------------------------------------------------------------------------------*/ END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-plipShutdown) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE plipShutdown Procedure PROCEDURE plipShutdown : /*------------------------------------------------------------------------------ Purpose: Cleans up the AppServer connections when the AppServer Manager is shut down. Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE BUFFER bttService FOR ttService. FOR EACH bttService: RUN disconnectService(bttService.cServiceName). END. EMPTY TEMP-TABLE AppSrv-TT. appSrvUtils = ?. gshAstraAppServer = ?. IF NOT VALID-HANDLE(hDynUser) THEN DELETE OBJECT hDynUser. DELETE OBJECT THIS-PROCEDURE. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-reconnectService) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE reconnectService Procedure PROCEDURE reconnectService : /*------------------------------------------------------------------------------ Purpose: Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE INPUT PARAMETER pcServiceName AS CHARACTER NO-UNDO. DEFINE OUTPUT PARAMETER pcHandle AS CHARACTER NO-UNDO. /* Clean up the old handle */ RUN disconnectService (pcServiceName). /* Connect the service again */ RUN connectService (pcServiceName, OUTPUT pcHandle). END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-registerService) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE registerService Procedure PROCEDURE registerService : /*------------------------------------------------------------------------------ Purpose: Super Override Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE INPUT PARAMETER phServiceBuff AS HANDLE NO-UNDO. DEFINE VARIABLE cParseConnect AS CHARACTER NO-UNDO. /* Code placed here will execute PRIOR to standard behavior. */ RUN SUPER(INPUT phServiceBuff). IF AVAILABLE(ttService) THEN DO: ASSIGN cParseConnect = parseConnectionParams(ttService.cConnectParams). FIND AppSrv-TT WHERE AppSrv-TT.partition = ttService.cServiceName NO-ERROR. IF NOT AVAILABLE AppSrv-TT THEN DO: CREATE AppSrv-TT. ASSIGN AppSrv-TT.partition = ttService.cServiceName. END. ASSIGN AppSrv-TT.Configuration = NOT (cParseConnect = "":U). END. /* Code placed here will execute AFTER standard behavior. */ END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-savePartitionInfo) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE savePartitionInfo Procedure PROCEDURE savePartitionInfo : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Parameters: Notes: ------------------------------------------------------------------------------*/ OUTPUT TO appsrvtt.d. FOR EACH AppSrv-TT NO-LOCK: /* This next 3 lines shouldn't be necessary, but there seems to be a bug in the updatable browse */ IF AppSrv-TT.App-Service = "" AND AppSrv-TT.Host = "" AND AppSrv-TT.Service = "" AND AppSrv-TT.Configuration = NO THEN DELETE AppSrv-TT. ELSE EXPORT AppSrv-TT.Partition AppSrv-TT.Host AppSrv-TT.Service AppSrv-TT.Configuration AppSrv-TT.Security AppSrv-TT.Info AppSrv-TT.App-Service AppSrv-TT.PartitionType AppSrv-TT.ServerURL. END. /* For Each */ OUTPUT CLOSE. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-security_prompt) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE security_prompt Procedure PROCEDURE security_prompt : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE OUTPUT PARAMETER lCancel AS LOGICAL NO-UNDO. lCancel = FALSE. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF /* ************************ Function Implementations ***************** */ &IF DEFINED(EXCLUDE-definedPartitions) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION definedPartitions Procedure FUNCTION definedPartitions RETURNS CHARACTER ( /* parameter-definitions */ ) : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Notes: ------------------------------------------------------------------------------*/ RETURN getPartitionsByType("A":U). END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getASConnectString) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION getASConnectString Procedure FUNCTION getASConnectString RETURNS CHARACTER ( BUFFER bAppSrvTT FOR AppSrv-TT ) : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Notes: ------------------------------------------------------------------------------*/ RETURN "":U. /* Function return value. */ END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getJMSPartitions) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION getJMSPartitions Procedure FUNCTION getJMSPartitions RETURNS CHARACTER ( /* parameter-definitions */ ) : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Notes: ------------------------------------------------------------------------------*/ RETURN getPartitionsByType("J":U). END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getJMSPtnInfo) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION getJMSPtnInfo Procedure FUNCTION getJMSPtnInfo RETURNS CHARACTER ( INPUT cPartition AS CHARACTER ) : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Notes: ------------------------------------------------------------------------------*/ RETURN "":U. /* Function return value. */ END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getPartitionsByType) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION getPartitionsByType Procedure FUNCTION getPartitionsByType RETURNS CHARACTER ( INPUT cType AS CHARACTER ) : /*------------------------------------------------------------------------------ Purpose: This is a procedure that was called in the as-utils. This is here for backward compatibility. Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE hConMgr AS HANDLE NO-UNDO. CASE cType: WHEN "A":U THEN RETURN DYNAMIC-FUNCTION("getServiceList":U IN THIS-PROCEDURE). WHEN "J":U THEN DO: hConMgr = DYNAMIC-FUNCTION("getManagerHandle":U IN THIS-PROCEDURE, "ConnectionManager":U). IF VALID-HANDLE(hConMgr) THEN RETURN DYNAMIC-FUNCTION("getServiceList":U IN hConMgr, "JMS":U). END. OTHERWISE RETURN "":U. END. END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-isConnected) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION isConnected Procedure FUNCTION isConnected RETURNS LOGICAL ( INPUT pcServiceName AS CHARACTER ) : /*------------------------------------------------------------------------------ Purpose: Determines whether the requested service type is connected. Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE lAns AS LOGICAL NO-UNDO. DEFINE VARIABLE hServer AS HANDLE NO-UNDO. /* Get the handle to the AppServer */ hServer = WIDGET-HANDLE(DYNAMIC-FUNCTION('getServiceHandle':U IN THIS-PROCEDURE, INPUT pcServiceName)). IF VALID-HANDLE(hServer) THEN DO: IF hServer = SESSION:HANDLE THEN lAns = YES. ELSE lAns = hServer:CONNECTED(). END. RETURN lAns. /* Function return value. */ END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-parseConnectionParams) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION parseConnectionParams Procedure FUNCTION parseConnectionParams RETURNS CHARACTER (INPUT pcParams AS CHARACTER ) : /*------------------------------------------------------------------------------ Purpose: Parses pcParams and returns the connection string. Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cConnectString AS CHARACTER NO-UNDO. DEFINE VARIABLE cMode AS CHARACTER NO-UNDO. DEFINE VARIABLE cString1 AS CHARACTER NO-UNDO. DEFINE VARIABLE cString2 AS CHARACTER NO-UNDO. DEFINE VARIABLE cClientType AS CHARACTER NO-UNDO. /* Parse the string to determine what parameters to use */ cMode = ENTRY(1,pcParams,CHR(3)). IF NUM-ENTRIES(pcParams,CHR(3)) > 1 THEN cString1 = ENTRY(2,pcParams,CHR(3)). IF NUM-ENTRIES(pcParams,CHR(3)) > 2 THEN cString2 = ENTRY(3,pcParams,CHR(3)). CASE cMode: WHEN "R":U OR WHEN "U":U THEN cConnectString = cString1. WHEN "D":U THEN DO: cClientType = DYNAMIC-FUNCTION("getPhysicalSessionType":U IN THIS-PROCEDURE). IF cClientType = "WBC":U THEN cConnectString = cString2. ELSE cConnectString = cString1. END. OTHERWISE cConnectString = "":U. END. RETURN cConnectString. /* Function return value. */ END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF