&ANALYZE-SUSPEND _VERSION-NUMBER UIB_v8r12 &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Check Version Notes Wizard" Procedure _INLINE /* Actions: af/cod/aftemwizcw.w ? ? ? ? */ /* MIP Update Version Notes Wizard Check object version notes. af/cod/aftemwizpw.w */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Update-Object-Version" Procedure _INLINE /* Actions: ? ? ? ? af/sup/afverxftrp.p */ /* This has to go above the definitions sections, as that is what it modifies. If its not, then the definitions section will have been saved before the XFTR code kicks in and changes it */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Definition Comments Wizard" Procedure _INLINE /* Actions: ? af/cod/aftemwizcw.w ? ? ? */ /* Program Definition Comment Block Wizard Welcome to the Program Definition Comment Block Wizard. Press Next to proceed. af/cod/aftemwizpw.w */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _DEFINITIONS Procedure /********************************************************************* * Copyright (C) 2000 by Progress Software Corporation ("PSC"), * * 14 Oak Park, Bedford, MA 01730, and other contributors as listed * * below. All Rights Reserved. * * * * The Initial Developer of the Original Code is PSC. The Original * * Code is Progress IDE code released to open source December 1, 2000.* * * * The contents of this file are subject to the Possenet Public * * License Version 1.0 (the "License"); you may not use this file * * except in compliance with the License. A copy of the License is * * available as of the date of this notice at * * http://www.possenet.org/license.html * * * * Software distributed under the License is distributed on an "AS IS"* * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. You* * should refer to the License for the specific language governing * * rights and limitations under the License. * * * * Contributors: * * * *********************************************************************/ /*--------------------------------------------------------------------------------- File: afsuprmanp.p Description: Manager Load As Super Procedure Purpose: Manager Load As Super Procedure: this procedure will add the specified manager as a super procedure of this procedure. This allows us to run internal procedures in a manager procedure across the AppServer boundary, without having to restart the manager every time we run an IP. Parameters: History: -------- (v:010000) Task: 7547 UserRef: Date: 17/01/2001 Author: Peter Judge Update Notes: Created from Template rytemplipp.p (v:010001) Task: 7704 UserRef: Date: 24/01/2001 Author: Peter Judge Update Notes: AF2/ Add new AstraGen Manager (v:010002) Task: 7806 UserRef: Date: 01/02/2001 Author: Peter Judge Update Notes: AF2/BUG/ Manager Super Procedure: - getInternalEntries adds extra characters - call to getPeriodObj uses incorrect path --------------------------------------------------------------------------------*/ /* This .W file was created with the Progress UIB. */ /*-------------------------------------------------------------------------------*/ /* *************************** Definitions ************************** */ /* MIP-GET-OBJECT-VERSION pre-processors The following pre-processors are maintained automatically when the object is saved. They pull the object and version from Roundtable if possible so that it can be displayed in the about window of the container */ &scop object-name afsuprmanp.p DEFINE VARIABLE lv_this_object_name AS CHARACTER INITIAL "{&object-name}":U NO-UNDO. &scop object-version 000000 /* Astra object identifying preprocessor */ &glob AstraProcedure yes {af/sup2/afglobals.i} /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-PREPROCESSOR-BLOCK /* ******************** Preprocessor Definitions ******************** */ &Scoped-define PROCEDURE-TYPE Procedure &Scoped-define DB-AWARE no /* _UIB-PREPROCESSOR-BLOCK-END */ &ANALYZE-RESUME /* ************************ Function Prototypes ********************** */ &IF DEFINED(EXCLUDE-addSuperProcedure) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD addSuperProcedure Procedure FUNCTION addSuperProcedure RETURNS LOGICAL ( INPUT phProcedure AS HANDLE ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getInternalEntries) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD getInternalEntries Procedure FUNCTION getInternalEntries RETURNS CHARACTER FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-removeAllExcept) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD removeAllExcept Procedure FUNCTION removeAllExcept RETURNS LOGICAL ( INPUT phProcedure AS HANDLE ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-removeSuperProcedure) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD removeSuperProcedure Procedure FUNCTION removeSuperProcedure RETURNS LOGICAL ( INPUT phProcedure AS HANDLE ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF /* *********************** Procedure Settings ************************ */ &ANALYZE-SUSPEND _PROCEDURE-SETTINGS /* Settings for THIS-PROCEDURE Type: Procedure Allow: Frames: 0 Add Fields to: Neither Other Settings: CODE-ONLY COMPILE */ &ANALYZE-RESUME _END-PROCEDURE-SETTINGS /* ************************* Create Window ************************** */ &ANALYZE-SUSPEND _CREATE-WINDOW /* DESIGN Window definition (used by the UIB) CREATE WINDOW Procedure ASSIGN HEIGHT = 10.48 WIDTH = 47.8. /* END WINDOW DEFINITION */ */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _MAIN-BLOCK Procedure /* *************************** Main Block *************************** */ ON CLOSE OF THIS-PROCEDURE DO: DYNAMIC-FUNCTION("removeAllExcept":U, INPUT ?). DELETE PROCEDURE THIS-PROCEDURE. RETURN. END. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME /* ********************** Internal Procedures *********************** */ &IF DEFINED(EXCLUDE-killPlip) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE killPlip Procedure PROCEDURE killPlip : /*------------------------------------------------------------------------------ Purpose: Parameters: Notes: ------------------------------------------------------------------------------*/ { ry/app/ryplipkill.i } RETURN. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-setAsSuperProcedure) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE setAsSuperProcedure Procedure PROCEDURE setAsSuperProcedure : /*------------------------------------------------------------------------------ Purpose: Sets the given manager as asuper procedure Parameters: pcUseThisManager - a comma-delimited list of managers to work with. pcAction - ADD, REMOVE, REPLACE Notes: * ADD: all managers specified are added to this procedure's super procedure stack * REMOVE: all managers specified are removed from this procedure's super procedure stack * REPLACE: this works in one of 2 ways - (i) if there is only one manager specified, remove all other entries and add that manager, if it exists. (ii) If there are 2 or more managers specified, the first entry will in the list will be added, and the others removed. ------------------------------------------------------------------------------*/ DEFINE INPUT PARAMETER pcUseThisManager AS CHARACTER NO-UNDO. DEFINE INPUT PARAMETER pcAction AS CHARACTER NO-UNDO. DEFINE VARIABLE hManagerUsed AS HANDLE NO-UNDO. DEFINE VARIABLE iManagerLoop AS INTEGER NO-UNDO. DEFINE VARIABLE cManagerName AS CHARACTER NO-UNDO. IF pcAction = "":U THEN ASSIGN pcAction = "ADD":U. DO iManagerLoop = 1 TO NUM-ENTRIES(pcUsethisManager): ASSIGN cManagerName = ENTRY(iManagerLoop, pcUseThisManager). ASSIGN hManagerUsed = DYNAMIC-FUNCTION("getManagerHandle":U, INPUT cManagerName). IF NOT VALID-HANDLE(hManagerUsed) THEN CASE cManagerName: WHEN "FIN":U THEN ASSIGN hManagerUsed = gshFinManager. WHEN "GEN":U THEN ASSIGN hManagerUsed = gshGenManager. WHEN "SESSION":U THEN ASSIGN hManagerUsed = gshSessionManager. WHEN "SECURITY":U THEN ASSIGN hManagerUsed = gshSecurityManager. WHEN "PROFILE":U THEN ASSIGN hManagerUsed = gshProfileManager. WHEN "REPOSITORY":U THEN ASSIGN hManagerUsed = gshRepositoryManager. WHEN "TRANSLATION":U THEN ASSIGN hManagerUsed = gshTranslationManager. WHEN "WEB":U THEN ASSIGN hManagerUsed = gshWebManager. WHEN "AGN":U THEN ASSIGN hManagerUsed = gshAgnManager. OTHERWISE DO: ASSIGN hManagerUsed = SESSION:FIRST-PROCEDURE. PROCDURE-SEARCH-LOOP: DO WHILE VALID-HANDLE(hManagerUsed): IF hManagerUsed:FILE-NAME EQ cManagerName OR hManagerUsed:FILE-NAME EQ REPLACE(cManagerName, ".p":U, ".r":U) THEN LEAVE PROCDURE-SEARCH-LOOP. ASSIGN hManagerUsed = hManagerUsed:NEXT-SIBLING. END. /* PROCDURE-SEARCH-LOOP: walk the proceduretry */ /* If there is a valid handle, check that the file-name matches that * which we're searching. If not, set the handle to an invalid value. */ IF VALID-HANDLE(hManagerUsed) AND hManagerUsed:FILE-NAME NE cManagerName AND hManagerUsed:FILE-NAME NE REPLACE(cManagerName, ".p":U, ".r":U) THEN ASSIGN hManagerUsed = ?. END. /* otherwise */ END CASE. /* use this manager */ IF VALID-HANDLE(hManagerUsed) THEN CASE pcAction: WHEN "ADD":U THEN DYNAMIC-FUNCTION("addSuperProcedure":U, INPUT hManagerUsed). WHEN "REMOVE":U THEN DYNAMIC-FUNCTION("removeSuperProcedure":U, INPUT hManagerUsed). WHEN "REPLACE":U THEN DO: IF iManagerLoop EQ 1 THEN DO: /* If there is only one entry in the list, remove all other * entries and add that manager, if it exists. * If there are 2 or more managers specified, the first entry * will in the list will be added, and the others removed. * ---------------------------------------------------------- */ IF NUM-ENTRIES(pcUseThisManager) > 1 THEN DYNAMIC-FUNCTION("addSuperProcedure":U, INPUT hManagerUsed). ELSE DYNAMIC-FUNCTION("removeAllExcept":U, INPUT hManagerUsed). END. /* first interation */ ELSE DYNAMIC-FUNCTION("removeSuperProcedure":U, INPUT hManagerUsed). END. /* replace */ END CASE. /* action */ END. /* loop through manager list */ RETURN. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF /* ************************ Function Implementations ***************** */ &IF DEFINED(EXCLUDE-addSuperProcedure) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION addSuperProcedure Procedure FUNCTION addSuperProcedure RETURNS LOGICAL ( INPUT phProcedure AS HANDLE ) : /*------------------------------------------------------------------------------ Purpose: Adds the specified procedure to this procedure's super procedure stack. Notes: ------------------------------------------------------------------------------*/ IF VALID-HANDLE(phProcedure) AND LOOKUP(STRING(phProcedure), THIS-PROCEDURE:SUPER-PROCEDURES) = 0 THEN THIS-PROCEDURE:ADD-SUPER-PROCEDURE(phProcedure). RETURN TRUE. END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-getInternalEntries) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION getInternalEntries Procedure FUNCTION getInternalEntries RETURNS CHARACTER: /*------------------------------------------------------------------------------ Purpose: Returns the internal entries of this procedure, and of all super procedures running. Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE iProcedureLoop AS INTEGER NO-UNDO. DEFINE VARIABLE hSuperProcedure AS HANDLE NO-UNDO. DEFINE VARIABLE cSuperProcedures AS CHARACTER NO-UNDO. DEFINE VARIABLE cInternalEntries AS CHARACTER NO-UNDO. ASSIGN cInternalEntries = THIS-PROCEDURE:INTERNAL-ENTRIES cSuperProcedures = THIS-PROCEDURE:SUPER-PROCEDURES . DO iProcedureLoop = 1 TO NUM-ENTRIES(cSuperProcedures): ASSIGN hSuperProcedure = WIDGET-HANDLE(ENTRY(iProcedureLoop, cSuperProcedures)) NO-ERROR. IF VALID-HANDLE(hSuperProcedure) THEN ASSIGN cInternalEntries = cInternalEntries + MIN(",":U, cInternalEntries) + hSuperProcedure:INTERNAL-ENTRIES. END. /* loop through super procedures */ RETURN cInternalEntries. END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-removeAllExcept) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION removeAllExcept Procedure FUNCTION removeAllExcept RETURNS LOGICAL ( INPUT phProcedure AS HANDLE ) : /*------------------------------------------------------------------------------ Purpose: Removes all super procedures from this procedures super procedure stack except the procedure specified. Will remove all procedures if the procedure handle is invalid. Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE iProcedureLoop AS INTEGER NO-UNDO. DEFINE VARIABLE hSuperProcedure AS HANDLE NO-UNDO. DEFINE VARIABLE cSuperProcedures AS CHARACTER NO-UNDO. ASSIGN cSuperProcedures = THIS-PROCEDURE:SUPER-PROCEDURES. DO iProcedureLoop = 1 TO NUM-ENTRIES(cSuperProcedures): ASSIGN hSuperProcedure = WIDGET-HANDLE(ENTRY(iProcedureLoop, cSuperProcedures)) NO-ERROR. IF phProcedure <> hSuperProcedure THEN DYNAMIC-FUNCTION("removeSuperProcedure":U, INPUT hSuperProcedure). END. /* loop through super procedures */ RETURN TRUE. END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF &IF DEFINED(EXCLUDE-removeSuperProcedure) = 0 &THEN &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION removeSuperProcedure Procedure FUNCTION removeSuperProcedure RETURNS LOGICAL ( INPUT phProcedure AS HANDLE ) : /*------------------------------------------------------------------------------ Purpose: Deletes the specified procedure from this procedures super procedure stack. Notes: ------------------------------------------------------------------------------*/ IF VALID-HANDLE(phProcedure) AND LOOKUP(STRING(phProcedure), THIS-PROCEDURE:SUPER-PROCEDURES) > 0 THEN THIS-PROCEDURE:REMOVE-SUPER-PROCEDURE(phProcedure). RETURN TRUE. END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ENDIF