&ANALYZE-SUSPEND _VERSION-NUMBER UIB_v8r12
&ANALYZE-RESUME
&ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Check Version Notes Wizard" Procedure _INLINE
/* Actions: af/cod/aftemwizcw.w ? ? ? ? */
/* MIP Update Version Notes Wizard
Check object version notes.
af/cod/aftemwizpw.w
*/
/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Update-Object-Version" Procedure _INLINE
/* Actions: ? ? ? ? af/sup/afverxftrp.p */
/* This has to go above the definitions sections, as that is what it modifies.
   If its not, then the definitions section will have been saved before the
   XFTR code kicks in and changes it */
/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Definition Comments Wizard" Procedure _INLINE
/* Actions: ? af/cod/aftemwizcw.w ? ? ? */
/* Program Definition Comment Block Wizard
Welcome to the Program Definition Comment Block Wizard. Press Next to proceed.
af/cod/aftemwizpw.w
*/
/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _DEFINITIONS Procedure 
/*********************************************************************
* Copyright (C) 2000 by Progress Software Corporation ("PSC"),       *
* 14 Oak Park, Bedford, MA 01730, and other contributors as listed   *
* below.  All Rights Reserved.                                       *
*                                                                    *
* The Initial Developer of the Original Code is PSC.  The Original   *
* Code is Progress IDE code released to open source December 1, 2000.*
*                                                                    *
* The contents of this file are subject to the Possenet Public       *
* License Version 1.0 (the "License"); you may not use this file     *
* except in compliance with the License.  A copy of the License is   *
* available as of the date of this notice at                         *
* http://www.possenet.org/license.html                               *
*                                                                    *
* Software distributed under the License is distributed on an "AS IS"*
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. You*
* should refer to the License for the specific language governing    *
* rights and limitations under the License.                          *
*                                                                    *
* Contributors:                                                      *
*                                                                    *
*********************************************************************/
/*---------------------------------------------------------------------------------
  File: gsmndplipp.p

  Description:  Node Test Plip

  Purpose:      Node Test Plip

  Parameters:   <none>

  History:
  --------
  (v:010000)    Task:    90000163   UserRef:    
                Date:   06/08/2001  Author:     Mark Davies

  Update Notes: Created from Template rytemplipp.p

---------------------------------------------------------------------------------*/
/*                   This .W file was created with the Progress UIB.             */
/*-------------------------------------------------------------------------------*/

/* ***************************  Definitions  ************************** */
/* MIP-GET-OBJECT-VERSION pre-processors
   The following pre-processors are maintained automatically when the object is
   saved. They pull the object and version from Roundtable if possible so that it
   can be displayed in the about window of the container */

&scop object-name       gsmndplipp.p
DEFINE VARIABLE lv_this_object_name AS CHARACTER INITIAL "{&object-name}":U NO-UNDO.
&scop object-version    010000

/* Astra object identifying preprocessor */
&glob   AstraPlip    yes

DEFINE VARIABLE cObjectName         AS CHARACTER NO-UNDO.

ASSIGN cObjectName = "{&object-name}":U.

&scop   mip-notify-user-on-plip-close   NO

{af/sup2/afglobals.i}

/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME


&ANALYZE-SUSPEND _UIB-PREPROCESSOR-BLOCK 

/* ********************  Preprocessor Definitions  ******************** */

&Scoped-define PROCEDURE-TYPE Procedure
&Scoped-define DB-AWARE no



/* _UIB-PREPROCESSOR-BLOCK-END */
&ANALYZE-RESUME



/* *********************** Procedure Settings ************************ */

&ANALYZE-SUSPEND _PROCEDURE-SETTINGS
/* Settings for THIS-PROCEDURE
   Type: Procedure
   Allow: 
   Frames: 0
   Add Fields to: Neither
   Other Settings: CODE-ONLY COMPILE
 */
&ANALYZE-RESUME _END-PROCEDURE-SETTINGS

/* *************************  Create Window  ************************** */

&ANALYZE-SUSPEND _CREATE-WINDOW
/* DESIGN Window definition (used by the UIB) 
  CREATE WINDOW Procedure ASSIGN
         HEIGHT             = 11.19
         WIDTH              = 56.
/* END WINDOW DEFINITION */
                                                                        */
&ANALYZE-RESUME

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _INCLUDED-LIB Procedure 
/* ************************* Included-Libraries *********************** */

{src/adm/method/attribut.i}

/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME


 


&ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _MAIN-BLOCK Procedure 


/* ***************************  Main Block  ******************************* */

{ry/app/ryplipmain.i}

/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME


/* **********************  Internal Procedures  *********************** */

&IF DEFINED(EXCLUDE-killPlip) = 0 &THEN

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE killPlip Procedure 
PROCEDURE killPlip :
/*------------------------------------------------------------------------------
  Purpose:     entry point to instantly kill the plip if it should get lost in memory
  Parameters:  <none>
  Notes:       
------------------------------------------------------------------------------*/

{ry/app/ryplipkill.i}

END PROCEDURE.

/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME

&ENDIF

&IF DEFINED(EXCLUDE-loadData) = 0 &THEN

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE loadData Procedure 
PROCEDURE loadData :
/*------------------------------------------------------------------------------
  Purpose:     
  Parameters:  <none>
  Notes:       
------------------------------------------------------------------------------*/
DEFINE INPUT        PARAMETER phParentNode  AS CHARACTER  NO-UNDO.
DEFINE INPUT-OUTPUT PARAMETER TABLE-HANDLE phTable. 


DEFINE VARIABLE hBuf                  AS HANDLE       NO-UNDO.
DEFINE VARIABLE hParentNodeKey        AS HANDLE       NO-UNDO.
DEFINE VARIABLE hNodeKef              AS HANDLE       NO-UNDO.
DEFINE VARIABLE hNodeLabel            AS HANDLE       NO-UNDO.
DEFINE VARIABLE hPrivateData          AS HANDLE       NO-UNDO.
DEFINE VARIABLE hRecordRef            AS HANDLE       NO-UNDO.
DEFINE VARIABLE hRecordRowid          AS HANDLE       NO-UNDO.

/* Grab the handles to the individual fields in the tree data table. */
ASSIGN hBuf           = phTable:DEFAULT-BUFFER-HANDLE
       hParentNodeKey = hBuf:BUFFER-FIELD('parent_node_key':U)
       hNodeKef       = hBuf:BUFFER-FIELD('node_key':U)
       hNodeLabel     = hBuf:BUFFER-FIELD('node_label':U)
       hPrivateData   = hBuf:BUFFER-FIELD('private_data':U)
       hRecordRef     = hBuf:BUFFER-FIELD('record_ref':U)
       hRecordRowid   = hBuf:BUFFER-FIELD('record_rowid':U).
       
FOR EACH gsc_logical_service NO-LOCK:
  hBuf:BUFFER-CREATE().
  ASSIGN hParentNodeKey:BUFFER-VALUE = phParentNode 
         hNodeKef:BUFFER-VALUE       = STRING(gsc_logical_service.logical_service_obj)
         hNodeLabel:BUFFER-VALUE     = gsc_logical_service.logical_service_code
         hRecordRef:BUFFER-VALUE     = TRIM(STRING(gsc_logical_service.logical_service_obj,"->>>>>>>>>>>>>>>>>9.999999999":U))
         hRecordRowid:BUFFER-VALUE   = ROWID(gsc_logical_service)
         hPrivateData:BUFFER-VALUE   = "gsclsfullo.w":U.
END.


END PROCEDURE.

/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME

&ENDIF

&IF DEFINED(EXCLUDE-objectDescription) = 0 &THEN

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE objectDescription Procedure 
PROCEDURE objectDescription :
/*------------------------------------------------------------------------------
  Purpose:     Pass out a description of the PLIP, used in Plip temp-table
  Parameters:  <none>
  Notes:       This should be changed manually for each plip
------------------------------------------------------------------------------*/

DEFINE OUTPUT PARAMETER cDescription AS CHARACTER NO-UNDO.

ASSIGN cDescription = "Astra 2 Template PLIP".

END PROCEDURE.

/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME

&ENDIF

&IF DEFINED(EXCLUDE-plipSetup) = 0 &THEN

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE plipSetup Procedure 
PROCEDURE plipSetup :
/*------------------------------------------------------------------------------
  Purpose:    Run by main-block of PLIP at startup of PLIP
  Parameters: <none>
  Notes:       
------------------------------------------------------------------------------*/

{ry/app/ryplipsetu.i}

END PROCEDURE.

/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME

&ENDIF

&IF DEFINED(EXCLUDE-plipShutdown) = 0 &THEN

&ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE plipShutdown Procedure 
PROCEDURE plipShutdown :
/*------------------------------------------------------------------------------
  Purpose:     This procedure will be run just before the calling program 
               terminates
  Parameters:  <none>
  Notes:       
------------------------------------------------------------------------------*/

{ry/app/ryplipshut.i}

END PROCEDURE.

/* _UIB-CODE-BLOCK-END */
&ANALYZE-RESUME

&ENDIF

