1007600214.08GSCERgsc_error - Errorsyesnoyesnoyesyes1007600215.081007600214.081GSCERyeserror_group,error_numberyesyesnono0gsc_errorICFDBgsc_erroricfdbXAK1gsc_error,1,0,0,error_obj,0XIE1gsc_error,0,0,0,error_group,0,error_summary_description,0XIE2gsc_error,0,0,0,language_obj,0,error_group,0,error_number,0XIE3gsc_error,0,0,0,error_type,0,error_group,0,error_number,0XIE4gsc_error,0,0,0,language_obj,0,error_type,0,error_group,0,error_number,0XIE5gsc_error,0,0,0,source_language,0XPKgsc_error,1,1,0,error_group,0,error_number,0,language_obj,0error_groupcharacter0X(10)Message grouperror_numberinteger0->>>>>>>9 0Message numberlanguage_objdecimal0->>>>>>>>>>>>>>>>>9.999999999 0.000000000Language objerror_summary_descriptioncharacter0X(70)Message summary descriptionerror_full_descriptioncharacter0X(3000)Message full descriptionerror_objdecimal0->>>>>>>>>>>>>>>>>9.999999999 0.000000000Message objupdate_error_loglogical0YES/NONO Update message logerror_typecharacter0X(3)Message typesource_languagelogical0YES/NONO Source languageAF1426The &1 must be specified.The &1 must be specified. &2241noINFyesAF2426Unidentified error from trigger.An error occurred in a trigger that did not return a correct return-value with ^ delimiters to identify the correct error code, group and message. This probably means that the standard trigger procedure error-message was not used.The error raised was &1242noINFyesAF3426The &1 cannot be modified if the system owned flag is set to YES.The &1 cannot be modified if the system owned flag is set to YES.243noINFyesAF4426The &1 should not be specified.The &1 should not be specified.244noINFyesAF5426The &1 specified is invalid.The &1 specified is invalid. &2245noINFyesAF6426Valid values for this field are &1.Valid values for this field are &1.246noINFyesAF7426Please enter a relative path.Please enter a relative path.247noINFyesAF8426A record with &1 &2 already exists &3.A record with &1 &2 already exists &3.248noINFyesAF9426The &1 date should be &2.The &1 date should be &2. You cannot enter a date with this value. Please try again. &3249noINFyesAF10426Cannot &1 file. Permission denied.Cannot &1 file. Permission denied. &2250noINFyesAF11426The &1 could not be found for &2.The &1 could not be found for &2. &3251noINFyesAF12426Could not run procedure in PLIP specified.The procedure &1 in PLIP &2 could not be run.252noINFyesAF13426The &1 cannot be modifiedThe &1 cannot be modified. If you wish to modify the &1, then you must delete the record and add a new record with the new value.Changing the &1 will change the nature of the record.253noINFyesAF14426&1 is not set up &2. Please contact your System Administrator.&1 is not set up &2. Please contact your System Administrator. &3.254noINFyesAF15426Cannot run because &1Cannot run because &1255noINFyesAF16426The copy of &1 details failed.The copy of &1 details failed.256noINFyesAF17426Access denied - &1.Access denied - &1.257noINFyesAF18426The &1 must contain &2.The &1 must contain &2. &3258noINFyesAF19426Cannot find &1 file: &2Cannot find &1 file: &2259noINFyesAF20426The record has been deleted by another user.The record has been deleted by another user.260noINFyesAF21426The filename specified must &1.The filename specified must &1.261noINFyesAF22426The &1 must be &2 if a &3 is specified.If a &3 is entered, the &1 must be &2.262noINFyesAF23426This object is assigned to a menu structure.This object is assigned to a menu structure and must be runnable from a menu.263noINFyesAF24426The &1 must begin with &2.The &1 must begin with &2.264noINFyesAF25426The &1 should be greater than &2.The &1 should be greater than &2. &3.265noINFyesAF26426The parent is not a sub-menu.The parent of a menu item must always be either a menu structure or a sub-menu.266noINFyesAF27426The &1 specified on record does not exist.The &1 specified on record does not exist.267noINFyesAF28426The &1 is on &2.The &1 is on &2.268noINFyesAF29426The &1 is not available.The &1 is not available. &2.269noINFyesAF31426A &1 already exists with &2.A &1 already exists with &2. You cannot add a duplicate.270noINFyesAF32426Calendar period &1 is already closed.Calendar period &1 is already closed. No processing is allowed for transactions dated prior to the current period's start date.271noINFyesAF33426The &1 should be greater than or equal to &2.The &1 should be greater than or equal to &2. &3.272noINFyesAF34426The &1 should be less than or equal to &2.The &1 should be less than or equal to &2. &3.273noINFyesAF35426If &1 is specified then &2 must be entered.If &1 is specified, &2 becomes mandatory and must be entered.274noINFyesAF36426The update of &1 failed because &2.The update of &1 failed because &2. &3275noINFyesAF37426Crystal report error number &1.Error number &1 was returned from the Crystal Reports engine.311noINFyesAF38426Only one entry for &1 is valid.Only one entry for &1 is valid.312noINFyesAF39426No &1 was found. &2No &1 was found. &2313noINFyesAF40426The following error occured while processing. &1The following error occured while processing. &1. Transaction was not completed.314noINFyesAF41426If &1 is specified then &2 cannot be entered.If &1 is specified then &2 cannot be entered. &3.249484noINFyesAF42426The &1 must end with &2.The &1 must end with &2.1003516386noINFyesAF43426A user cannot be a deputy for him/herself.A user cannot be a deputy for him/herself.1003535588noERRyesAF44426You are about to change the Product Module.Read the Message Detail.You are about to change the Product Module for the selected object.
Before you verify that you want to change the Product Module, read the following implications of making such a change:
* If you use a Source Code Management (SCM) tool, it might not allow you to change the Product Module of the selected object. (You should check your SCM tool guidelines first.)
* When you change the Product Module of an object, Progress Dynamics moves the object in the repository, but it does not move its associated Application Data Object (ADO) file on the disk. You must manually move the ADO file from the old Product Module directory to the new Product Module directory in the central repository. If you do not, you could experience problems when you deploy your application in a distributed development environment. If you deploy datasets without first moving the ADO file, Progress Dynamics could inadvertently load invalid data into a target repository.
* If you change the Product Module for a static object you must manually move both the static object file, as well as its associated ADO file, from the old Product Module directory to the new Product Module directory. (The repository only stores the association between the static file and the Product Module.)
* If there are any references to the object using its old relative path, you must change those references so that they use the new object path. (You should not have to do this for a logical object.)
Are you sure you want to change this object's Product Module?
32004.9875noQUEyesAF45426Cannot change security model if security allocations exist.You are not allowed to switch between security models if security allocations exist for the assigned model.
You need to clear all allocations before attempting to change the security model.
123759.9875noERRyesAF46426You need to set up security first when using a Grant model.You are attempting to turn security checking on for a Grant model, but you didn't set up any security allocations. Doing this will render the application unusable since no one will have access to it.
You need to at least set up security for a user with administration privileges.
123761.9875noERRyesAF47426Are you sure you want to delete all existing Security Allocations?Are you sure you want to delete all existing Security Allocations?
Answering YES to this question will remove all existing Security Allocations for all User/Groups and Login Companies.
Before you attempt to do this you need to make sure you understand what this entails. It is suggested that you do a backup of your database before proceeding with this process.
123765.9875noQUEyesAF99426Cannot access context for this scope. Context scope has expired.Cannot access context for this scope. Context scope has expired.500136.24yesERRyesAF 101426Cannot delete &1 because &2 exists!Cannot delete &1 because &2 exists!276noINFyesAF 102426Cannot create &1 because &2 does not exist ! &3Cannot create &1 because &2 does not exist ! &3277noINFyesAF 103426Cannot update &1 because &2 does not exist !Cannot update &1 because &2 does not exist !278noINFyesAF104426Cannot &1 - it is locked by another user !Cannot &1 - it is locked by another user ! This only normally happens when a standard lock message appears and you choose CANCEL to stop waiting. Pressing CANCEL undoes all the updates and you must re-perform the action that you aborted. If the lock occurs again, try waiting a little longer to see if the record gets freed on its own. If it does not, then contact the system administrator and report the locking conflicts as a potential problem.105031noINFyesAF105426Deletion of &1 records is not allowed by the system !Cannot delete &1 ! To disallow further use, set a stop date, disabled flag, etc. as appropriate. If you need to actually delete the record, then please contact your system administrator.
105342noINFyesAF106426Cannot delete &1 because the current status is &2!Cannot delete &1 because the current status is &2!250139noINFyesAF107426Cannot update both &1 and &2.Cannot update both &1 and &2.
The program you are using is trying to update two mutually exclusive fields. This implies a design problem in the user interface. Contact your system administrator.1004870631.09noINFyesAF108426The &1 succeeded. &2The &1 succeeded. &21004867356.09noINFyesAF109426If the &1 is true, the &2 must also be true.If the &1 is true, the &2 must also be true.1004910210.09noINFyesAF110426The &1 and the &2 must be the same.The &1 and the &2 must be the same.1004926886.09noINFyesAF111426The &1 should be the same as existing &2 for this &3 and &4.The &1 should be the same as existing &2 for this &3 and &4.1004896191.09noINFyesAF112426The &1 cannot contain the &2 keyword.The &1 cannot contain the &2 keyword.1004935528.09noINFyesAF113426The syntax of the dynamic query is invalid.The query :
"&1"
failed to compile due to the following errors:
&21004936844.09yesWARyesAF114426Field references not valid for buffer &1The field(s) &2 were not found in buffer &1.
Progress returned:
&31004936853.09noWARyesAF116426Unable to build dataset &1.The dataset generation procedure was unable to build the dataset &1. The reasons are listed below.1004937063.09noWARyesAF117426Unable to &1 XML document &2The application was unable to &1 the XML document &2.
Progress returned the following errors:
&31004938198.09noWARyesAF118426Viewer Link Name cannot be GroupAssign.The Viewer Link Name can only be GroupAssign when One-to-One Update in SBO is checked.1004938474.09noINFyesAF119426Unable to build temp-table structure for table &1The temp-table structure for table &1 could not be built.
Progress returned the following errors from the TEMP-TABLE-PREPARE method:
&2
1004938475.09noWARyesAF120426Only one or all of the Data Source Names can be Update Targets.A viewer normally updates only one SDO of an SBO. When updating multiple SDOs of an SBO (one-to-one) all SDOs need to be defined as update targets.
1004938476.09noINFyesAF121426Update Target Names must match one or all Data Source Names.A viewer normally updates only one SDO of an SBO. When updating multiple SDOs of an SBO (one-to-one) all SDOs need to be defined as update targets.1004943079.09noINFyesAF122426Unable to load &1 node in XML file: &2Unable to load &1 node in XML file: &21004943408.09noWARyesAF123426XML/ADO file &1 is invalidThe data contained in the XML/ADO file &1 cannot be read as the XML file has an invalid format. The &2 is invalid.1004946674.09noWARyesAF124426Unable to create ICFCONFIG file. &1The framework was unable to create the ICFCONFIG file requested. The framework returned the following message:
&11004955997.09noWARyesAF125426The Host, Name Service and AppService are all required.The Host, Name Service and AppService are all required for Regular Physical Service connections.1004956039.09noINFyesAF126426The AppServer URL is required.The AppServer URL is required for URL Physical Service connections.1004956055.09noINFyesAF127426The Host, Name Service, AppService and AppServer URL are all required.The Host, Name Service, AppService and AppServer URL are all required for Decide At Run-time Physical Service connections.1004956056.09noINFyesAF128426The Broker URL is required.The Broker URL is required.1004956063.09noINFyesAF129426The Physical Database Name is required.The Physical Database Name is required.1004956064.09noINFyesAF130426The Network Type, Host, and Service are all required.The Network Type, Host, and Service are all required if any one of them is specified.
1004956065.09noINFyesAF131426Changes have been made to &1.
Save these changes now?Changes have been made to the current record (which could include the addition of a new record) and have not been saved. Please indicate if the changes should be saved.17439.5053noINFyesAF132426Cannot change from a '&1' to a '&2'. See details for more information.You are in the process of creating a '&1' which currently contains elements not allowed by the class.
If you are creating Dynamic Frames, you cannot have any menu structures on the specified object. If you are creating Dynamic SBOs, you cannot have visual object instances, menu structures, pages or links other than 'Data' or user-defined links on the specified object.
Remove the invalid elements before attempting to change the class again.725000000183.5566noERRyesAF133426The selected instance ('&1') is not a valid '&2-&3'.The instance you selected cannot act as a '&2-&3'. Please select a valid instance.725000002441.5566noERRyesAF134426The container needs a toolbar to render menu structures properly.You have allocated menu structures to your container, but you have not added a toolbar. Without the toolbar, the container will not be able to render the menu structures.
This does not prevent the container from running, but please add an appropriate toolbar if you want to use the menu structures on your container.725000005917.5566noWARyesAF135426A suffix must be specified for the &1A suffix must be specified for the &116943.0766noINFyesAF136426The number of fields in the &1 must be greater than 0The number of fields in the &1 must be greater than 016945.0766noINFyesAF137426The number of fields per column in the Viewer must be greater than 0The number of fields per column in the Viewer must be greater than 016947.0766noINFyesAF138426At least one table or object should be selected.At least one table or object should be selected.16949.0766noINFyesAF139426Data Field generation not selected. Do you wish to continue?You have chosen not to generate Data Fields. However, certain object types like SDO's and Viewers require data fields to function. If you are sure the data fields exist, continue with the object generation.
Would you like to continue with the object generation?16951.0766noWARyesAF140426Entity Import for table &1 requiredPlease do an Entity Import for table &1 or add it manually from the Entity Control Maintenance Suite.
The entity information is needed to generate the required objects correctly.16953.0766noINFyesAF141426Object generation completed successfully.Object generation completed successfully.16985.0766noINFyesAF142426Object generation completed with errors.Object generation completed with errors.16987.0766noINFyesAF143426Data Objects Exist. Do you wish to Override?The following Data Object(s) already exist:
&1
Do you wish to override these Data Objects?17041.0766noWARyesAF144426User password must match confirm password.User password must match confirm password.18129.0766noWARyesAF145426Users exist which are based on this user profile.Users exist which are based on this user profile.18131.0766noWARyesAF146426Based on Profile User cannot be the same as the current user.Based on Profile User cannot be the same as the current user.18134.0766noWARyesAF147426This tool will create a new security Group, based on a selected user.This tool will create a new security Group, based on a selected user.
If the user that you select is a profile user, then the new security group
that will be created, will only contain the common security allocations between
the profile user, and all users based on the profile user.
If a user is selected that is not a profile user, then all security allocations will be
moved to the new security group, and the user will now be linked to this new
group.
The tool moves security allocations from the user to the new group that it creates.23670.0766noINFyesCR20500426There is not enough memory available to complete the call.Not enough memory for operation, or not enough memory to get selection formula or cannot get selection formula.175262noINFyesCR20501426Internal error.Invalid job number.175263noINFyesCR20502426You have specified an MDI form as the parent of a print window.Invalid handle, or parent window cannot be an MDI form, or invalid parent window handle.175264noINFyesCR20503426Internal error.Buffer too small for string.175265noINFyesCR20504426Report not found.You have specified a form that does not exist.175266noINFyesCR20505426No print destination specified or invalid print destination.Print destination must be 0, 1 or 2. You have specified a print destination other than one of these values.175267noINFyesCR20506426Invalid file number.You have tried to set an N-th file name and the file number you specified is out of the existing range: 0 <= fileN < N files175268noINFyesCR20507426Invalid filename.There is an error in the file name you specified.175269noINFyesCR20508426Internal error.Invalid field number.175270noINFyesCR20509426Invalid field name.You specified an invalid database field for a sort field. The program cannot add the sort field name you specified.175271noINFyesCR20510426Invalid formula name.The formula name you specified is invalid or non-existent.175272noINFyesCR20511426Internal error.Invalid sort direction.175273noINFyesCR20512426Internal error.Print engine not open.175274noINFyesCR20513426Invalid printer.The printer driver for the printer you specified is missing.175275noINFyesCR20514426Print file exists.The name you have specified for the print file already exists. You must delete the file and print again, or specify a different file.175276noINFyesCR20515426Error in formula.There is a formula error in the replacement formula text. Review the formula syntax and retry.175277noINFyesCR20517426Internal error.Print engine already in use.175278noINFyesCR20520426Print job already started.You are trying to start a print job that has already been started. This can happen if a user starts a print job, and then tries to start printing again before the previous printing has finished.
(Programmer's note: Disable the form while action is in progress, and re-enable the form once action is complete. This will help avoid the conflict that generates this error.)175279noINFyesCR20521426Invalid summary field.Invalid summary field.The summary field specified as a group sort field is invalid or non-existent.175280noINFyesCR20522426Not enough system resources.There are not enough Windows system resources to process the function.175281noINFyesCR20524426Print job busy.You tried to initiate printing while Crystal Reports is already rprinting a job.
(Programmers' Note: Disable the form while action is in progress and re-enable the form once action is complete. This will help avoid the conflict that generates this message.)175282noINFyesCR20525426Unable to load report.There is something wrong with the report you are trying to open.175283noINFyesCR20526426No default printer.You haven't specified a default printer. Specify a default print via the Windows Control Panel.175284noINFyesCR20527426SQL server error.There is a problem connecting with the SQL server.175285noINFyesCR20529426Disk full.When printing to file or when sorting, the program requires more room than is available on the disk.175288noINFyesCR20530426File I/O error.In trying to print to file, the program is encountering another file problem besides disk full.175289noINFyesCR20531426Incorrect password.You have specified an incorrect password.175290noINFyesCR20532426Missing database DLL.The database DLL is corrupt.175291noINFyesCR20533426Unable to open database file.Something is wrong with the database you have specified. You may need to verify using the Database 175292noINFyesCR20534426Error detected by database DLL.
The database DLL is corrupt.
175293noINFyesCR20535426Unable to connect: incorrect session parameters.You have attempted to log on using incomplete or incorrect session parameters.175294noINFyesCR20536426Unable to connect: incorrect log on parameters.You have attempted to log on using incomplete or incorrect session parameters.175295noINFyesCR20537426Unable to connect: incorrect table location.The table you have specified cannot be found.175296noINFyesCR20538426Internal error.
Parameter has invalid structure size.175297noINFyesCR20599426Internal error.Check that your ODBC settings are correct and that your network connection is working.250140noINFyesCR20999426Internal error.Operation not yet implemented.175298noINFyesGS1426This object uses a menu structure and so must be a containerThis object uses a menu structure and so must be a container279noINFyesGS2426Profile flag must be YES because users are based on this profile.The user profile flag must be YES because users exist that are based on this profile user. To disable this user as a profile user, you must first change all users based on this user to be based on a different profile user.280noINFyesGS3426Password must be at least &1 characters.Password must be at least &1 characters.281noINFyesGS4426The same password cannot be used within &1 days.The password entered exists in the password history for this user within the password lifetime parameter setting of &1 days. Please select a different password.282noINFyesGS5426Only a radio-set may contain a widget entry number > 1.Only a radio-set may contain a widget entry number > 1. The widget entry number corresponds to the label number in the radio-set list.283noINFyesGS6426The date of birth must be within the last &1 years.The date of birth must be earlier than today's date, and not more than &1 years ago.284noINFyesGS7426Another person was found with the same ID type and number.Another person was found with the same ID type and number.The ID number must be unique within this ID type.285noINFyesGS8426&1 is an invalid country. Failed Clavis validation.&1 is not a valid country in the Clavis data files. Valid countries are:&2.286noINFyesGS9426This role is not valid for this organisation.This role is not valid for this organisation.Role = &1Organisation = &2315noINFyesGS10426Unable to look up &1 as no &2 has been entered.Unable to look up &1 as no &2 has been entered.316noINFyesGS11426Please specify a unique passwordThis password is already in use. The system requires that the user's password is unique to the system.317noINFyesGS12426Access denied - Log in using a valid company.Access denied - Log in using a valid company. This procedure requires that you log into a valid login organisation. Please re-logon, specifying a valid company to continue.1003699845noERRyesHTM1426You must enter an integer value for &1 (&2)You must enter an integer value for &1 (&2)2634.1713noERRyesHTM2426You must enter a decimal value for &1 in the format '1234&399' (&2)You must enter a decimal value for &1 in the format '1234&399' (&2)2636.1713noERRyesHTM3426You must enter a date value for &1 in the '99/99/9999' format using...You must enter a date value for &1 in the '99/99/9999' format using '&3' convention (&2)2638.1713noERRyesHTM4426Do you want to delete this record?Do you want to delete this record?2640.1713noQUEyesHTM5426Do you want to save current changes?Do you want to save current changes?2642.1713noQUEyesHTM6426Calculator;OK;CancelCalculator;OK;Cancel2644.1713noINFyesHTM7426Calendar;OK;CancelCalendar;OK;Cancel2646.1713noINFyesHTM8426January,February,March,April,May,June,July,August,September,October...January,February,March,April,May,June,July,August,September,October,November,December2648.1713noINFyesHTM9426Filter;Save settings:;From:;To:;OK;Cancel;ClearFilter;Save settings:;From:;To:;OK;Cancel;Clear2650.1713noINFyesHTM10426Record has changed.\nWould you like to discard your changes?Record has changed.\nWould you like to discard your changes?2652.1713noQUEyesHTM11426Record has changed.\nWould you like to overwrite your changes?Record has changed.\nWould you like to overwrite your changes?2654.1713noQUEyesHTM13426Invalid data for &1 with value &2Invalid data for &1 with value &22658.1713noERRyesHTM16426Following widget could not be found: &1Following widget could not be found: &13009.1713noERRyesHTM17426Cannot find WDO=&1 agg=&2 param=&3Cannot find WDO=&1 agg=&2 param=&35187.1713noERRyesHTM18426Viewer action unknown: &1Viewer action unknown: &15189.1713noERRyesHTM19426Data synchronization warning: &1Data synchronization warning: &15191.1713noWARyesHTM20426&1 for &2 not yet implemented! (&3)&1 for &2 not yet implemented! (&3)5193.1713noERRyesHTM21426Event unknown.Event unknown.5195.1713noERRyesHTM22426Find;From:;To:;OK;Cancel;ClearFind;From:;To:;OK;Cancel;Clear5219.1713noINFyesHTM23426From:;To:From:;To:5221.1713noINFyesHTM24426Number of data rowsNumber of data rows5223.1713noINFyesHTM25426User Input;Yes;No;Cancel;OKUser Input;Yes;No;Cancel;OK3000044754.09noINFyesICF1426Unable to obtain handle to buffer &1The session was unable to obtain a handle to a buffer object for the table &1.1005079049.09noWARyesICF2426No record available in buffer &1There is no record available in the &1 buffer where it is expected that the record would already have been found.1005079050.09noWARyesICF3426Field &1 could not be found in buffer &2A BUFFER-FIELD called &1 could not be found in the &2 buffer. No handle to the field &1 could therefore not be obtained.1005079051.09noWARyesICF4426Errors in relationship XML fileThere are errors in the relationship XML file that prevent the XML file from loading.9853.24noWARyesICF5426The &1 field (&2) is invalid and cannot be applied to the relationshipThe &1 field (&2) is invalid and cannot be applied to the relationship9855.24noWARyesICF6426Session Type &1 not registered in Repository.Session Type &1 not registered in Repository.909692.24noWARyesICF7426This change requires updates of version data. See Message details tab.Changing the value of any of the Version Data fields for this entity (Entity Object Field, Entity Key Field, Table has object field, Version data and Reuse deleted keys flags) requires that the record version data for this entity be updated.
This means that all the record version data for this entity in the repository will be changed to reflect any key value changes or other changes required as a result of changes to the Version data flag.
This process cannot be undone and will force a complete re-deployment of all data for this entity on a subsequent release.
Bear in mind that this process may take a significant amount of time (several minutes, maybe even hours) depending on the amount of data being versioned for this entity.933026.24noWARyesICF8426Generating a release could take a long time. Are you sure?Generating a release requires that data be generated as a snapshot of the application at this point. This process can be time consuming, especially if you generate the ADOs that need to be deployed with it.
Are you sure you want to continue?939106.24noWARyesICF9426Release version generation completed successfully.The generation of the release version data completed successfully.951258.24noMESyesRV1426No current transaction context exists for database alias &1. &2No current transaction context exists for database alias &1. &21003021328noINFyesRV2426Attempt to modify items outside the context of a specific workspace. &1Attempt to modify items outside the context of a specific workspace. &11003021329noINFyesRV3426Attempt to modify items in workspace &1 which is not registered. &2Attempt to modify items in workspace &1 which is not registered. &21003021330noINFyesRV4426Attempt to modify items in workspace &1 which is currently locked. &2Attempt to modify items in workspace &1 which is currently locked. &21003021331noINFyesRV5426Attempt to modify items outside the context of a specific task. &2Attempt to modify items outside the context of a specific task. &2
The Versioning system was unable to obtain details of your currently selected task from Roundtable.1003021332noINFyesRV6426Attempt to modify item within workspace &1 under task &2, when that workspace is currently checked out under task &3. &4Attempt to modify item within workspace &1 under task &2, when that workspace is currently checked out under task &3. &41003021333noINFyesRV7426Attempt to modify an element of item &1 which is not a recognised Configuratino Type. &2Attempt to modify an element of item &1 which is not a recognised Configuration Type. &2
A replication trigger on Table-A has invoked Versioning with a primary FLA corresponding to Table-B. This primary FLA is not present in the Configuration Type table.1003021334noINFyesRV8426Attempt to modify item of configuration type &1 which is currently locked. &2Attempt to modify item of configuration type &1 which is currently locked. &2
When the Configuration Type is locked no modifications to items of that type are permitted. 1003021335noINFyesRV9426Attempt to modify item of Configuration Type &1 under task &2, when that Configuration Type is currently checked out under task &3. &4Attempt to modify item of Configuration Type &1 under task &2, when that Configuration Type is currently checked out under task &3. &4
The Configuration Type has been checked out under a task. Items of that Configuration Type can only be modifies under this task, until such time as it is checked in again.1003021345noINFyesRV10426Attempt to create item &1 with key &2 which already exists in workspace &3. &4Attempt to create item &1 with key &2 which already exists in workspace &3. &4
Your attempt to create a new item in the workspace has been rejected because the Versioning system believe that the item already exists. This would appear to indicate that the Versioning system is out of step with the data actually present in your workspace: the duplicate creation should have been detected within your workspace (by the WRITE trigger) prior to it being registered in the Versioning system (by the REPLICATION-WRITE trigger).1003021425noINFyesRV11426Attempt to modify item &1 with key &2 which does not exist in workspace &3. &4Attempt to modify item &1 with key &2 which does not exist in workspace &3. &4
This error may indicate that the Versioning system is out of step with the data actually in your workspace. Alternatively it may indicate timing errors in that REPLICATION-WRITE triggers for the item are firing before the REPLICATION-CREATE trigger.1003021426noINFyesRV12426Attempt to modify item &1 with key &2 under task &3 when that item is currently checked out under task &4. &5Attempt to modify item &1 with key &2 under task &3 when that item is currently checked out under task &4. &5
Modifications to an item are only permitted within the same task as that under which the item is currently checked-out. 1003021428noINFyesRV13426Attempt to modify item checked out with an invalid modification type of &1. Valid modification types are VER, REV, PAT or UNK. &4Attempt to modify item checked out with an invalid modification type of &1. Valid modification types are VER, REV, PAT or UNK.
There is an error in the check out record for this item. The modification type indicates which element of the version number will be incremented. The checkout record has an invalid modification type.1003021429noINFyesRV14426Unable to identify Product Module for a new Configuration Item of Configuration Type &1. &2Unable to identify Product Module for a new Configuration Item of Configuration Type &1. &2
The product module is determined by either
(a) examining the product_module_fieldname of the Configuration Type record and using the corresponding value in the primary table buffer, or
(b) using the default value contained in the product_module_obj field of the Configuration Type.
The error arose because both of these fields (product_module_fieldname and product_module_obj) are empty.1003032020noINFyesRV15426Attempt to check out an item with an SCM SubType of &1. However no COnfiguration Type record exists with an scm_code of &1. &2Attempt to check out an item with an SCM SubType of &1. However no COnfiguration Type record exists with an scm_code of &1. &21003032105noINFyesRV16426Attempt to check out an item in workspace with scm_code &1 which does not exist.Attempt to check out an item in workspace with scm_code &1 which does not exist.1003032126noINFyesRV17426Attempt to checkout from workspace &2 item with object name &1, which does not exist.Attempt to checkout from workspace &2 item with object name &1, which does not exist.1003032128noINFyesRV18426Attempt to checkout from workspace &3 item of subtype &1 with object name &2 which does not exist.Attempt to checkout from workspace &3 item of subtype &1 with object name &2 which does not exist.1003032130noINFyesRV19426Error attempting to open dynamic query: &1Error attempting to open dynamic query:
&1
The identifying object name (field &2) could not be determined.1003183249noINFyesRV20426Error retrieving first record from dynamic query: &1Error attempting to open dynamic query:
&1
The identifying object name (field &2) could not be determined.1003183253noINFyesRV21426Attempt to delete object with name &1 from workspace &2 under task &3 . A deleted item record already exists for this item in the workspace, but under a different task.Attempt to delete object with name &1 from workspace &2 under task &3. A deleted item record already exists for this item in the workspace, but under a different task.1003183287noINFyesRV22426You cannot create data item for &1 since this is already a configuration item in its own right. Use your SCM tool to assign the item to this workspace.You cannot create data item for &1 since this is already a configuration item in its own right. Use your SCM tool to assign the item to this workspace.1003203002noINFyesRV23426Could not find Configuration Item with name &1 and type &2 when performing deletion checks.Could not find Configuration Item with name &1 and type &2 when performing deletion checks.1003223586noINFyesRV24426Attempt to modify an item with object name &1 which is not checked out in workspace &2.Attempt to modify an item with object name &1 which is not checked out in workspace &2.1003223702noINFyesRV25426Attempt to modify items within the context of task &1 which is not an open task.Attempt to modify items within the context of task &1 which is not an open task.1003223706noINFyesRV26426Attempt to create data corresponding to an object name &1 which exists in your SCM tool but has not been assigned to workspace &2.Attempt to create data corresponding to an object name &1 which exists in your SCM tool but has not been assigned to workspace &2.1003249904noINFyesRV27426Attempt to create data corresponding to an object named &1 which is not checked out in your SCM tool under workspace &2.Attempt to create data corresponding to an object named &1 which is not checked out in your SCM tool under workspace &2.1003249905noINFyesRV28426Attempt to create data corresponding to an object named &1 under task &2, when that object is checked out in your SCM toool under task &3.Attempt to create data corresponding to an object named &1 under task &2, when that object is checked out in your SCM tool under task &3.1003249906noINFyesRV29426Unable to escalate lock status to Exclusive for &1 record.Unable to escalate lock status to Exclusive for &1 record.
The record was found NO-LOCK, but the subsequent FIND CURRENT &1 EXCLUSIVE-LOCK NO-WAIT has reported that the record was locked by another session.1003289550noINFyesRY1426Object &1 is not defined in the repository.Object &1 is not defined in the repository.1003496757noERRyesRY2426The object name &1 does not exist in the &2 wizard table.The object name &1 does not exist in the &2 wizard table.1003596940noERRyesRY3426The physical object name &1 does not exist.The physical object name &1 does not exist. This name is hard-coded in the wizard generation program ry/app/rywizogenp.p and so must exist in order to forward generate dynamic objects based on this generic object template.
1003597140noERRyesRY4426The object type &1 does not exist.The object type &1 does not exist. This name is hard-coded in the wizard generation program ry/app/rywizogenp.p and so must exist in order to forward generate dynamic objects based on this object type.
1003597141noERRyesRY5426Unsupported object type &1 passed to forward generate program.Unsupported object type &1 passed to forward generate program ry/app/rywizogenp.p.
The supported object types for forward generation are menc,objc,fold,view,brow.
1003597179noERRyesRY6426Cannot launch container &1.Cannot launch container &1. The likely cause is the object does not exist yet in the ICFDB object table gsc_object, or is set-up incorrectly. For logical objects ensure the physical object name is specified correctly. Also ensure the object exists in the repository database table ryc_smartobject.
1003602711noERRyesRY7426An extension should not be specified for a logical object.An extension should not be specified for a logical object.1003604536noERRyesRY8426A physical file name should be specified for a logical object.A physical file name should be specified for a logical object.1003604772noERRyesRY9426You are attempting to &1 on a non-indexed field or are using the index inefficiently. This could potentially make your query slow. Do you want to continue?You are attempting to &1 on a non-indexed field or are using the index inefficiently. This could potentially make your query slow. Do you want to continue?1003607408noWARyesRY10426Concurrent multiple lookups not supportedA lookup is already running that is using the data set required for the lookup you have just chosen. Close the currently running lookup to be able to run the new lookup.1003653986noERRyesRY11426This folder window will be shut down as all tabs are disabled.Due to the fact that all the tabs for this program were programmatically disabled, the folder will now shut down.1003981540noERRyesRY12426Object &1 cannot be moved to object type &2 as &2 is not relatedObject &1 cannot be moved to object type &2 as &2 is not a parent or child of the existing object type (&3) of object &1.
Objects may only be moved within the hierarchy in which they exist.3000040688.09noERRyesRY13426The &1 class does not inherit from the &2 class.The &1 class does not inherit from the &2 class. &336362.48noERRyesRY14426Datafield &1 has no master object in the repository.Datafield &1 has no master object in the repository. Run the Object Generator or the Entity import tool to create it.33495.409noERRyesRY15426Unable to locate &1 in the repository.Unable to locate &1 in the repository. Please register it.33635.409noERRyesRY16426Unable to find data source &1.Unable to find data source &1. Cannot add fields to viewer.33649.409noERRyesRY17426Unable to run datasource &1. Cannot add fields to viewer.Unable to run datasource &1. Cannot add fields to viewer.33653.409noERRyesRY18426Unable to start SBO contained SDO &1.Unable to start SBO contained SDO &1.33665.409noERRyesRY19426Associated datasource &1 has not been registered in the repositiory.Associated datasource &1 has not been registered in the repositiory because33682.409noERRyesRY20426Do you want to continue to close this window and all its children?The window you are closing has child windows open. Do you want to continue to close this window and all its children?3000050103.09noQUEyesRY21426Translation causes resizing out of session scopeThe translations assigned to the viewer will require the viewer to be sized wider than your current session width. You should try to enter shorter translations for these objects or increase the size of your screen resolution.128278.9875noWARyesSCM1426&1 &2 SCM Xref information is not available&1 &2 SCM Xref information is not available in the SCM Xref Table.
Check the SCM Xref maintenance to ensure that a valid reference exists between the object type and a valid SCM object type.1000009936.81noERRyesSCM2426&1 &2 cannot be changed to &3 as the SCM Xref data does not match&1 &2 cannot be changed to &3 as the SCM Xref data does not match.
The &1 for &2 and &3 must be linked to the same SCM &1 in the SCM Xref table.
Select a new &1 where the SCM Xref data is the same as for &2.1000009938.81noERRyes