"AF" 1 426 "The &1 must be specified." "The &1 must be specified. &2" 241 no "INF" yes "AF" 2 426 "Unidentified error from trigger." "An error occurred in a trigger that did not return a correct return-value with ^ delimiters to identify the correct error code, group and message. This probably means that the standard trigger procedure error-message was not used.The error raised was &1" 242 no "INF" yes "AF" 3 426 "The &1 cannot be modified if the system owned flag is set to YES." "The &1 cannot be modified if the system owned flag is set to YES." 243 no "INF" yes "AF" 4 426 "The &1 should not be specified." "The &1 should not be specified." 244 no "INF" yes "AF" 5 426 "The &1 specified is invalid." "The &1 specified is invalid. &2" 245 no "INF" yes "AF" 6 426 "Valid values for this field are &1." "Valid values for this field are &1." 246 no "INF" yes "AF" 7 426 "Please enter a relative path." "Please enter a relative path." 247 no "INF" yes "AF" 8 426 "A record with &1 &2 already exists &3." "A record with &1 &2 already exists &3." 248 no "INF" yes "AF" 9 426 "The &1 date should be &2." "The &1 date should be &2. You cannot enter a date with this value. Please try again. &3" 249 no "INF" yes "AF" 10 426 "Cannot &1 file. Permission denied." "Cannot &1 file. Permission denied. &2" 250 no "INF" yes "AF" 11 426 "The &1 could not be found for &2." "The &1 could not be found for &2. &3" 251 no "INF" yes "AF" 12 426 "Could not run procedure in PLIP specified." "The procedure &1 in PLIP &2 could not be run." 252 no "INF" yes "AF" 13 426 "The &1 cannot be modified" "The &1 cannot be modified. If you wish to modify the &1, then you must delete the record and add a new record with the new value.Changing the &1 will change the nature of the record." 253 no "INF" yes "AF" 14 426 "&1 is not set up &2. Please contact your System Administrator." "&1 is not set up &2. Please contact your System Administrator. &3." 254 no "INF" yes "AF" 15 426 "Cannot run because &1" "Cannot run because &1" 255 no "INF" yes "AF" 16 426 "The copy of &1 details failed." "The copy of &1 details failed." 256 no "INF" yes "AF" 17 426 "Access denied - &1." "Access denied - &1." 257 no "INF" yes "AF" 18 426 "The &1 must contain &2." "The &1 must contain &2. &3" 258 no "INF" yes "AF" 19 426 "Cannot find &1 file: &2" "Cannot find &1 file: &2" 259 no "INF" yes "AF" 20 426 "The record has been deleted by another user." "The record has been deleted by another user." 260 no "INF" yes "AF" 21 426 "The filename specified must &1." "The filename specified must &1." 261 no "INF" yes "AF" 22 426 "The &1 must be &2 if a &3 is specified." "If a &3 is entered, the &1 must be &2." 262 no "INF" yes "AF" 23 426 "This object is assigned to a menu structure." "This object is assigned to a menu structure and must be runnable from a menu." 263 no "INF" yes "AF" 24 426 "The &1 must begin with &2." "The &1 must begin with &2." 264 no "INF" yes "AF" 25 426 "The &1 should be greater than &2." "The &1 should be greater than &2. &3." 265 no "INF" yes "AF" 26 426 "The parent is not a sub-menu." "The parent of a menu item must always be either a menu structure or a sub-menu." 266 no "INF" yes "AF" 27 426 "The &1 specified on record does not exist." "The &1 specified on record does not exist." 267 no "INF" yes "AF" 28 426 "The &1 is on &2." "The &1 is on &2." 268 no "INF" yes "AF" 29 426 "The &1 is not available." "The &1 is not available. &2." 269 no "INF" yes "AF" 31 426 "A &1 already exists with &2." "A &1 already exists with &2. You cannot add a duplicate." 270 no "INF" yes "AF" 32 426 "Calendar period &1 is already closed." "Calendar period &1 is already closed. No processing is allowed for transactions dated prior to the current period's start date." 271 no "INF" yes "AF" 33 426 "The &1 should be greater than or equal to &2." "The &1 should be greater than or equal to &2. &3." 272 no "INF" yes "AF" 34 426 "The &1 should be less than or equal to &2." "The &1 should be less than or equal to &2. &3." 273 no "INF" yes "AF" 35 426 "If &1 is specified then &2 must be entered." "If &1 is specified, &2 becomes mandatory and must be entered." 274 no "INF" yes "AF" 36 426 "The update of &1 failed because &2." "The update of &1 failed because &2. &3" 275 no "INF" yes "AF" 37 426 "Crystal report error number &1." "Error number &1 was returned from the Crystal Reports engine." 311 no "INF" yes "AF" 38 426 "Only one entry for &1 is valid." "Only one entry for &1 is valid." 312 no "INF" yes "AF" 39 426 "No &1 was found. &2" "No &1 was found. &2" 313 no "INF" yes "AF" 40 426 "The following error occured while processing. &1" "The following error occured while processing. &1. Transaction was not completed." 314 no "INF" yes "AF" 41 426 "If &1 is specified then &2 cannot be entered." "If &1 is specified then &2 cannot be entered. &3." 249484 no "INF" yes "AF" 42 426 "The &1 must end with &2." "The &1 must end with &2." 1003516386 no "INF" yes "AF" 43 426 "A user cannot be a deputy for him/herself." "A user cannot be a deputy for him/herself." 1003535588 no "ERR" yes "AF" 44 426 "You are about to change the Product Module.Read the Message Detail." "You are about to change the Product Module for the selected object. Before you verify that you want to change the Product Module, read the following implications of making such a change: * If you use a Source Code Management (SCM) tool, it might not allow you to change the Product Module of the selected object. (You should check your SCM tool guidelines first.) * When you change the Product Module of an object, Progress Dynamics moves the object in the repository, but it does not move its associated Application Data Object (ADO) file on the disk. You must manually move the ADO file from the old Product Module directory to the new Product Module directory in the central repository. If you do not, you could experience problems when you deploy your application in a distributed development environment. If you deploy datasets without first moving the ADO file, Progress Dynamics could inadvertently load invalid data into a target repository. * If you change the Product Module for a static object you must manually move both the static object file, as well as its associated ADO file, from the old Product Module directory to the new Product Module directory. (The repository only stores the association between the static file and the Product Module.) * If there are any references to the object using its old relative path, you must change those references so that they use the new object path. (You should not have to do this for a logical object.) Are you sure you want to change this object's Product Module? " 32004.9875 no "QUE" yes "AF" 45 426 "Cannot change security model if security allocations exist." "You are not allowed to switch between security models if security allocations exist for the assigned model. You need to clear all allocations before attempting to change the security model. " 123759.9875 no "ERR" yes "AF" 46 426 "You need to set up security first when using a Grant model." "You are attempting to turn security checking on for a Grant model, but you didn't set up any security allocations. Doing this will render the application unusable since no one will have access to it. You need to at least set up security for a user with administration privileges. " 123761.9875 no "ERR" yes "AF" 47 426 "Are you sure you want to delete all existing Security Allocations?" "Are you sure you want to delete all existing Security Allocations? Answering YES to this question will remove all existing Security Allocations for all User/Groups and Login Companies. Before you attempt to do this you need to make sure you understand what this entails. It is suggested that you do a backup of your database before proceeding with this process. " 123765.9875 no "QUE" yes "AF" 99 426 "Cannot access context for this scope. Context scope has expired." "Cannot access context for this scope. Context scope has expired." 500136.24 yes "ERR" yes "AF " 101 426 "Cannot delete &1 because &2 exists!" "Cannot delete &1 because &2 exists!" 276 no "INF" yes "AF " 102 426 "Cannot create &1 because &2 does not exist ! &3" "Cannot create &1 because &2 does not exist ! &3" 277 no "INF" yes "AF " 103 426 "Cannot update &1 because &2 does not exist !" "Cannot update &1 because &2 does not exist !" 278 no "INF" yes "AF" 104 426 "Cannot &1 - it is locked by another user !" "Cannot &1 - it is locked by another user ! This only normally happens when a standard lock message appears and you choose CANCEL to stop waiting. Pressing CANCEL undoes all the updates and you must re-perform the action that you aborted. If the lock occurs again, try waiting a little longer to see if the record gets freed on its own. If it does not, then contact the system administrator and report the locking conflicts as a potential problem." 105031 no "INF" yes "AF" 105 426 "Deletion of &1 records is not allowed by the system !" "Cannot delete &1 ! To disallow further use, set a stop date, disabled flag, etc. as appropriate. If you need to actually delete the record, then please contact your system administrator. " 105342 no "INF" yes "AF" 106 426 "Cannot delete &1 because the current status is &2!" "Cannot delete &1 because the current status is &2!" 250139 no "INF" yes "AF" 107 426 "Cannot update both &1 and &2." "Cannot update both &1 and &2. The program you are using is trying to update two mutually exclusive fields. This implies a design problem in the user interface. Contact your system administrator." 1004870631.09 no "INF" yes "AF" 108 426 "The &1 succeeded. &2" "The &1 succeeded. &2" 1004867356.09 no "INF" yes "AF" 109 426 "If the &1 is true, the &2 must also be true." "If the &1 is true, the &2 must also be true." 1004910210.09 no "INF" yes "AF" 110 426 "The &1 and the &2 must be the same." "The &1 and the &2 must be the same." 1004926886.09 no "INF" yes "AF" 111 426 "The &1 should be the same as existing &2 for this &3 and &4." "The &1 should be the same as existing &2 for this &3 and &4." 1004896191.09 no "INF" yes "AF" 112 426 "The &1 cannot contain the &2 keyword." "The &1 cannot contain the &2 keyword." 1004935528.09 no "INF" yes "AF" 113 426 "The syntax of the dynamic query is invalid." "The query : ""&1"" failed to compile due to the following errors: &2" 1004936844.09 yes "WAR" yes "AF" 114 426 "Field references not valid for buffer &1" "The field(s) &2 were not found in buffer &1. Progress returned: &3" 1004936853.09 no "WAR" yes "AF" 116 426 "Unable to build dataset &1." "The dataset generation procedure was unable to build the dataset &1. The reasons are listed below." 1004937063.09 no "WAR" yes "AF" 117 426 "Unable to &1 XML document &2" "The application was unable to &1 the XML document &2. Progress returned the following errors: &3" 1004938198.09 no "WAR" yes "AF" 118 426 "Viewer Link Name cannot be GroupAssign." "The Viewer Link Name can only be GroupAssign when One-to-One Update in SBO is checked." 1004938474.09 no "INF" yes "AF" 119 426 "Unable to build temp-table structure for table &1" "The temp-table structure for table &1 could not be built. Progress returned the following errors from the TEMP-TABLE-PREPARE method: &2 " 1004938475.09 no "WAR" yes "AF" 120 426 "Only one or all of the Data Source Names can be Update Targets." "A viewer normally updates only one SDO of an SBO. When updating multiple SDOs of an SBO (one-to-one) all SDOs need to be defined as update targets. " 1004938476.09 no "INF" yes "AF" 121 426 "Update Target Names must match one or all Data Source Names." "A viewer normally updates only one SDO of an SBO. When updating multiple SDOs of an SBO (one-to-one) all SDOs need to be defined as update targets." 1004943079.09 no "INF" yes "AF" 122 426 "Unable to load &1 node in XML file: &2" "Unable to load &1 node in XML file: &2" 1004943408.09 no "WAR" yes "AF" 123 426 "XML/ADO file &1 is invalid" "The data contained in the XML/ADO file &1 cannot be read as the XML file has an invalid format. The &2 is invalid." 1004946674.09 no "WAR" yes "AF" 124 426 "Unable to create ICFCONFIG file. &1" "The framework was unable to create the ICFCONFIG file requested. The framework returned the following message: &1" 1004955997.09 no "WAR" yes "AF" 125 426 "The Host, Name Service and AppService are all required." "The Host, Name Service and AppService are all required for Regular Physical Service connections." 1004956039.09 no "INF" yes "AF" 126 426 "The AppServer URL is required." "The AppServer URL is required for URL Physical Service connections." 1004956055.09 no "INF" yes "AF" 127 426 "The Host, Name Service, AppService and AppServer URL are all required." "The Host, Name Service, AppService and AppServer URL are all required for Decide At Run-time Physical Service connections." 1004956056.09 no "INF" yes "AF" 128 426 "The Broker URL is required." "The Broker URL is required." 1004956063.09 no "INF" yes "AF" 129 426 "The Physical Database Name is required." "The Physical Database Name is required." 1004956064.09 no "INF" yes "AF" 130 426 "The Network Type, Host, and Service are all required." "The Network Type, Host, and Service are all required if any one of them is specified. " 1004956065.09 no "INF" yes "AF" 131 426 "Changes have been made to &1. Save these changes now?" "Changes have been made to the current record (which could include the addition of a new record) and have not been saved. Please indicate if the changes should be saved." 17439.5053 no "INF" yes "AF" 132 426 "Cannot change from a '&1' to a '&2'. See details for more information." "You are in the process of creating a '&1' which currently contains elements not allowed by the class. If you are creating Dynamic Frames, you cannot have any menu structures on the specified object. If you are creating Dynamic SBOs, you cannot have visual object instances, menu structures, pages or links other than 'Data' or user-defined links on the specified object. Remove the invalid elements before attempting to change the class again." 725000000183.5566 no "ERR" yes "AF" 133 426 "The selected instance ('&1') is not a valid '&2-&3'." "The instance you selected cannot act as a '&2-&3'. Please select a valid instance." 725000002441.5566 no "ERR" yes "AF" 134 426 "The container needs a toolbar to render menu structures properly." "You have allocated menu structures to your container, but you have not added a toolbar. Without the toolbar, the container will not be able to render the menu structures. This does not prevent the container from running, but please add an appropriate toolbar if you want to use the menu structures on your container." 725000005917.5566 no "WAR" yes "AF" 135 426 "A suffix must be specified for the &1" "A suffix must be specified for the &1" 16943.0766 no "INF" yes "AF" 136 426 "The number of fields in the &1 must be greater than 0" "The number of fields in the &1 must be greater than 0" 16945.0766 no "INF" yes "AF" 137 426 "The number of fields per column in the Viewer must be greater than 0" "The number of fields per column in the Viewer must be greater than 0" 16947.0766 no "INF" yes "AF" 138 426 "At least one table or object should be selected." "At least one table or object should be selected." 16949.0766 no "INF" yes "AF" 139 426 "Data Field generation not selected. Do you wish to continue?" "You have chosen not to generate Data Fields. However, certain object types like SDO's and Viewers require data fields to function. If you are sure the data fields exist, continue with the object generation. Would you like to continue with the object generation?" 16951.0766 no "WAR" yes "AF" 140 426 "Entity Import for table &1 required" "Please do an Entity Import for table &1 or add it manually from the Entity Control Maintenance Suite. The entity information is needed to generate the required objects correctly." 16953.0766 no "INF" yes "AF" 141 426 "Object generation completed successfully." "Object generation completed successfully." 16985.0766 no "INF" yes "AF" 142 426 "Object generation completed with errors." "Object generation completed with errors." 16987.0766 no "INF" yes "AF" 143 426 "Data Objects Exist. Do you wish to Override?" "The following Data Object(s) already exist: &1 Do you wish to override these Data Objects?" 17041.0766 no "WAR" yes "AF" 144 426 "User password must match confirm password." "User password must match confirm password." 18129.0766 no "WAR" yes "AF" 145 426 "Users exist which are based on this user profile." "Users exist which are based on this user profile." 18131.0766 no "WAR" yes "AF" 146 426 "Based on Profile User cannot be the same as the current user." "Based on Profile User cannot be the same as the current user." 18134.0766 no "WAR" yes "AF" 147 426 "This tool will create a new security Group, based on a selected user." "This tool will create a new security Group, based on a selected user. If the user that you select is a profile user, then the new security group that will be created, will only contain the common security allocations between the profile user, and all users based on the profile user. If a user is selected that is not a profile user, then all security allocations will be moved to the new security group, and the user will now be linked to this new group. The tool moves security allocations from the user to the new group that it creates." 23670.0766 no "INF" yes "CR" 20500 426 "There is not enough memory available to complete the call." "Not enough memory for operation, or not enough memory to get selection formula or cannot get selection formula." 175262 no "INF" yes "CR" 20501 426 "Internal error." "Invalid job number." 175263 no "INF" yes "CR" 20502 426 "You have specified an MDI form as the parent of a print window." "Invalid handle, or parent window cannot be an MDI form, or invalid parent window handle." 175264 no "INF" yes "CR" 20503 426 "Internal error." "Buffer too small for string." 175265 no "INF" yes "CR" 20504 426 "Report not found." "You have specified a form that does not exist." 175266 no "INF" yes "CR" 20505 426 "No print destination specified or invalid print destination." "Print destination must be 0, 1 or 2. You have specified a print destination other than one of these values." 175267 no "INF" yes "CR" 20506 426 "Invalid file number." "You have tried to set an N-th file name and the file number you specified is out of the existing range: 0 <= fileN < N files" 175268 no "INF" yes "CR" 20507 426 "Invalid filename." "There is an error in the file name you specified." 175269 no "INF" yes "CR" 20508 426 "Internal error." "Invalid field number." 175270 no "INF" yes "CR" 20509 426 "Invalid field name." "You specified an invalid database field for a sort field. The program cannot add the sort field name you specified." 175271 no "INF" yes "CR" 20510 426 "Invalid formula name." "The formula name you specified is invalid or non-existent." 175272 no "INF" yes "CR" 20511 426 "Internal error." "Invalid sort direction." 175273 no "INF" yes "CR" 20512 426 "Internal error." "Print engine not open." 175274 no "INF" yes "CR" 20513 426 "Invalid printer." "The printer driver for the printer you specified is missing." 175275 no "INF" yes "CR" 20514 426 "Print file exists." "The name you have specified for the print file already exists. You must delete the file and print again, or specify a different file." 175276 no "INF" yes "CR" 20515 426 "Error in formula." "There is a formula error in the replacement formula text. Review the formula syntax and retry." 175277 no "INF" yes "CR" 20517 426 "Internal error." "Print engine already in use." 175278 no "INF" yes "CR" 20520 426 "Print job already started." "You are trying to start a print job that has already been started. This can happen if a user starts a print job, and then tries to start printing again before the previous printing has finished. (Programmer's note: Disable the form while action is in progress, and re-enable the form once action is complete. This will help avoid the conflict that generates this error.)" 175279 no "INF" yes "CR" 20521 426 "Invalid summary field." "Invalid summary field.The summary field specified as a group sort field is invalid or non-existent." 175280 no "INF" yes "CR" 20522 426 "Not enough system resources." "There are not enough Windows system resources to process the function." 175281 no "INF" yes "CR" 20524 426 "Print job busy." "You tried to initiate printing while Crystal Reports is already rprinting a job. (Programmers' Note: Disable the form while action is in progress and re-enable the form once action is complete. This will help avoid the conflict that generates this message.)" 175282 no "INF" yes "CR" 20525 426 "Unable to load report." "There is something wrong with the report you are trying to open." 175283 no "INF" yes "CR" 20526 426 "No default printer." "You haven't specified a default printer. Specify a default print via the Windows Control Panel." 175284 no "INF" yes "CR" 20527 426 "SQL server error." "There is a problem connecting with the SQL server." 175285 no "INF" yes "CR" 20529 426 "Disk full." "When printing to file or when sorting, the program requires more room than is available on the disk." 175288 no "INF" yes "CR" 20530 426 "File I/O error." "In trying to print to file, the program is encountering another file problem besides disk full." 175289 no "INF" yes "CR" 20531 426 "Incorrect password." "You have specified an incorrect password." 175290 no "INF" yes "CR" 20532 426 "Missing database DLL." "The database DLL is corrupt." 175291 no "INF" yes "CR" 20533 426 "Unable to open database file." "Something is wrong with the database you have specified. You may need to verify using the Database " 175292 no "INF" yes "CR" 20534 426 "Error detected by database DLL. " "The database DLL is corrupt. " 175293 no "INF" yes "CR" 20535 426 "Unable to connect: incorrect session parameters." "You have attempted to log on using incomplete or incorrect session parameters." 175294 no "INF" yes "CR" 20536 426 "Unable to connect: incorrect log on parameters." "You have attempted to log on using incomplete or incorrect session parameters." 175295 no "INF" yes "CR" 20537 426 "Unable to connect: incorrect table location." "The table you have specified cannot be found." 175296 no "INF" yes "CR" 20538 426 "Internal error. " "Parameter has invalid structure size." 175297 no "INF" yes "CR" 20599 426 "Internal error." "Check that your ODBC settings are correct and that your network connection is working." 250140 no "INF" yes "CR" 20999 426 "Internal error." "Operation not yet implemented." 175298 no "INF" yes "GS" 1 426 "This object uses a menu structure and so must be a container" "This object uses a menu structure and so must be a container" 279 no "INF" yes "GS" 2 426 "Profile flag must be YES because users are based on this profile." "The user profile flag must be YES because users exist that are based on this profile user. To disable this user as a profile user, you must first change all users based on this user to be based on a different profile user." 280 no "INF" yes "GS" 3 426 "Password must be at least &1 characters." "Password must be at least &1 characters." 281 no "INF" yes "GS" 4 426 "The same password cannot be used within &1 days." "The password entered exists in the password history for this user within the password lifetime parameter setting of &1 days. Please select a different password." 282 no "INF" yes "GS" 5 426 "Only a radio-set may contain a widget entry number > 1." "Only a radio-set may contain a widget entry number > 1. The widget entry number corresponds to the label number in the radio-set list." 283 no "INF" yes "GS" 6 426 "The date of birth must be within the last &1 years." "The date of birth must be earlier than today's date, and not more than &1 years ago." 284 no "INF" yes "GS" 7 426 "Another person was found with the same ID type and number." "Another person was found with the same ID type and number.The ID number must be unique within this ID type." 285 no "INF" yes "GS" 8 426 "&1 is an invalid country. Failed Clavis validation." "&1 is not a valid country in the Clavis data files. Valid countries are:&2." 286 no "INF" yes "GS" 9 426 "This role is not valid for this organisation." "This role is not valid for this organisation.Role = &1Organisation = &2" 315 no "INF" yes "GS" 10 426 "Unable to look up &1 as no &2 has been entered." "Unable to look up &1 as no &2 has been entered." 316 no "INF" yes "GS" 11 426 "Please specify a unique password" "This password is already in use. The system requires that the user's password is unique to the system." 317 no "INF" yes "GS" 12 426 "Access denied - Log in using a valid company." "Access denied - Log in using a valid company. This procedure requires that you log into a valid login organisation. Please re-logon, specifying a valid company to continue." 1003699845 no "ERR" yes "HTM" 1 426 "You must enter an integer value for &1 (&2)" "You must enter an integer value for &1 (&2)" 2634.1713 no "ERR" yes "HTM" 2 426 "You must enter a decimal value for &1 in the format '1234&399' (&2)" "You must enter a decimal value for &1 in the format '1234&399' (&2)" 2636.1713 no "ERR" yes "HTM" 3 426 "You must enter a date value for &1 in the '99/99/9999' format using..." "You must enter a date value for &1 in the '99/99/9999' format using '&3' convention (&2)" 2638.1713 no "ERR" yes "HTM" 4 426 "Do you want to delete this record?" "Do you want to delete this record?" 2640.1713 no "QUE" yes "HTM" 5 426 "Do you want to save current changes?" "Do you want to save current changes?" 2642.1713 no "QUE" yes "HTM" 6 426 "Calculator;OK;Cancel" "Calculator;OK;Cancel" 2644.1713 no "INF" yes "HTM" 7 426 "Calendar;OK;Cancel" "Calendar;OK;Cancel" 2646.1713 no "INF" yes "HTM" 8 426 "January,February,March,April,May,June,July,August,September,October..." "January,February,March,April,May,June,July,August,September,October,November,December" 2648.1713 no "INF" yes "HTM" 9 426 "Filter;Save settings:;From:;To:;OK;Cancel;Clear" "Filter;Save settings:;From:;To:;OK;Cancel;Clear" 2650.1713 no "INF" yes "HTM" 10 426 "Record has changed.\nWould you like to discard your changes?" "Record has changed.\nWould you like to discard your changes?" 2652.1713 no "QUE" yes "HTM" 11 426 "Record has changed.\nWould you like to overwrite your changes?" "Record has changed.\nWould you like to overwrite your changes?" 2654.1713 no "QUE" yes "HTM" 13 426 "Invalid data for &1 with value &2" "Invalid data for &1 with value &2" 2658.1713 no "ERR" yes "HTM" 16 426 "Following widget could not be found: &1" "Following widget could not be found: &1" 3009.1713 no "ERR" yes "HTM" 17 426 "Cannot find WDO=&1 agg=&2 param=&3" "Cannot find WDO=&1 agg=&2 param=&3" 5187.1713 no "ERR" yes "HTM" 18 426 "Viewer action unknown: &1" "Viewer action unknown: &1" 5189.1713 no "ERR" yes "HTM" 19 426 "Data synchronization warning: &1" "Data synchronization warning: &1" 5191.1713 no "WAR" yes "HTM" 20 426 "&1 for &2 not yet implemented! (&3)" "&1 for &2 not yet implemented! (&3)" 5193.1713 no "ERR" yes "HTM" 21 426 "Event unknown." "Event unknown." 5195.1713 no "ERR" yes "HTM" 22 426 "Find;From:;To:;OK;Cancel;Clear" "Find;From:;To:;OK;Cancel;Clear" 5219.1713 no "INF" yes "HTM" 23 426 "From:;To:" "From:;To:" 5221.1713 no "INF" yes "HTM" 24 426 "Number of data rows" "Number of data rows" 5223.1713 no "INF" yes "HTM" 25 426 "User Input;Yes;No;Cancel;OK" "User Input;Yes;No;Cancel;OK" 3000044754.09 no "INF" yes "ICF" 1 426 "Unable to obtain handle to buffer &1" "The session was unable to obtain a handle to a buffer object for the table &1." 1005079049.09 no "WAR" yes "ICF" 2 426 "No record available in buffer &1" "There is no record available in the &1 buffer where it is expected that the record would already have been found." 1005079050.09 no "WAR" yes "ICF" 3 426 "Field &1 could not be found in buffer &2" "A BUFFER-FIELD called &1 could not be found in the &2 buffer. No handle to the field &1 could therefore not be obtained." 1005079051.09 no "WAR" yes "ICF" 4 426 "Errors in relationship XML file" "There are errors in the relationship XML file that prevent the XML file from loading." 9853.24 no "WAR" yes "ICF" 5 426 "The &1 field (&2) is invalid and cannot be applied to the relationship" "The &1 field (&2) is invalid and cannot be applied to the relationship" 9855.24 no "WAR" yes "ICF" 6 426 "Session Type &1 not registered in Repository." "Session Type &1 not registered in Repository." 909692.24 no "WAR" yes "ICF" 7 426 "This change requires updates of version data. See Message details tab." "Changing the value of any of the Version Data fields for this entity (Entity Object Field, Entity Key Field, Table has object field, Version data and Reuse deleted keys flags) requires that the record version data for this entity be updated. This means that all the record version data for this entity in the repository will be changed to reflect any key value changes or other changes required as a result of changes to the Version data flag. This process cannot be undone and will force a complete re-deployment of all data for this entity on a subsequent release. Bear in mind that this process may take a significant amount of time (several minutes, maybe even hours) depending on the amount of data being versioned for this entity." 933026.24 no "WAR" yes "ICF" 8 426 "Generating a release could take a long time. Are you sure?" "Generating a release requires that data be generated as a snapshot of the application at this point. This process can be time consuming, especially if you generate the ADOs that need to be deployed with it. Are you sure you want to continue?" 939106.24 no "WAR" yes "ICF" 9 426 "Release version generation completed successfully." "The generation of the release version data completed successfully." 951258.24 no "MES" yes "RV" 1 426 "No current transaction context exists for database alias &1. &2" "No current transaction context exists for database alias &1. &2" 1003021328 no "INF" yes "RV" 2 426 "Attempt to modify items outside the context of a specific workspace. &1" "Attempt to modify items outside the context of a specific workspace. &1" 1003021329 no "INF" yes "RV" 3 426 "Attempt to modify items in workspace &1 which is not registered. &2" "Attempt to modify items in workspace &1 which is not registered. &2" 1003021330 no "INF" yes "RV" 4 426 "Attempt to modify items in workspace &1 which is currently locked. &2" "Attempt to modify items in workspace &1 which is currently locked. &2" 1003021331 no "INF" yes "RV" 5 426 "Attempt to modify items outside the context of a specific task. &2" "Attempt to modify items outside the context of a specific task. &2 The Versioning system was unable to obtain details of your currently selected task from Roundtable." 1003021332 no "INF" yes "RV" 6 426 "Attempt to modify item within workspace &1 under task &2, when that workspace is currently checked out under task &3. &4" "Attempt to modify item within workspace &1 under task &2, when that workspace is currently checked out under task &3. &4" 1003021333 no "INF" yes "RV" 7 426 "Attempt to modify an element of item &1 which is not a recognised Configuratino Type. &2" "Attempt to modify an element of item &1 which is not a recognised Configuration Type. &2 A replication trigger on Table-A has invoked Versioning with a primary FLA corresponding to Table-B. This primary FLA is not present in the Configuration Type table." 1003021334 no "INF" yes "RV" 8 426 "Attempt to modify item of configuration type &1 which is currently locked. &2" "Attempt to modify item of configuration type &1 which is currently locked. &2 When the Configuration Type is locked no modifications to items of that type are permitted. " 1003021335 no "INF" yes "RV" 9 426 "Attempt to modify item of Configuration Type &1 under task &2, when that Configuration Type is currently checked out under task &3. &4" "Attempt to modify item of Configuration Type &1 under task &2, when that Configuration Type is currently checked out under task &3. &4 The Configuration Type has been checked out under a task. Items of that Configuration Type can only be modifies under this task, until such time as it is checked in again." 1003021345 no "INF" yes "RV" 10 426 "Attempt to create item &1 with key &2 which already exists in workspace &3. &4" "Attempt to create item &1 with key &2 which already exists in workspace &3. &4 Your attempt to create a new item in the workspace has been rejected because the Versioning system believe that the item already exists. This would appear to indicate that the Versioning system is out of step with the data actually present in your workspace: the duplicate creation should have been detected within your workspace (by the WRITE trigger) prior to it being registered in the Versioning system (by the REPLICATION-WRITE trigger)." 1003021425 no "INF" yes "RV" 11 426 "Attempt to modify item &1 with key &2 which does not exist in workspace &3. &4" "Attempt to modify item &1 with key &2 which does not exist in workspace &3. &4 This error may indicate that the Versioning system is out of step with the data actually in your workspace. Alternatively it may indicate timing errors in that REPLICATION-WRITE triggers for the item are firing before the REPLICATION-CREATE trigger." 1003021426 no "INF" yes "RV" 12 426 "Attempt to modify item &1 with key &2 under task &3 when that item is currently checked out under task &4. &5" "Attempt to modify item &1 with key &2 under task &3 when that item is currently checked out under task &4. &5 Modifications to an item are only permitted within the same task as that under which the item is currently checked-out. " 1003021428 no "INF" yes "RV" 13 426 "Attempt to modify item checked out with an invalid modification type of &1. Valid modification types are VER, REV, PAT or UNK. &4" "Attempt to modify item checked out with an invalid modification type of &1. Valid modification types are VER, REV, PAT or UNK. There is an error in the check out record for this item. The modification type indicates which element of the version number will be incremented. The checkout record has an invalid modification type." 1003021429 no "INF" yes "RV" 14 426 "Unable to identify Product Module for a new Configuration Item of Configuration Type &1. &2" "Unable to identify Product Module for a new Configuration Item of Configuration Type &1. &2 The product module is determined by either (a) examining the product_module_fieldname of the Configuration Type record and using the corresponding value in the primary table buffer, or (b) using the default value contained in the product_module_obj field of the Configuration Type. The error arose because both of these fields (product_module_fieldname and product_module_obj) are empty." 1003032020 no "INF" yes "RV" 15 426 "Attempt to check out an item with an SCM SubType of &1. However no COnfiguration Type record exists with an scm_code of &1. &2" "Attempt to check out an item with an SCM SubType of &1. However no COnfiguration Type record exists with an scm_code of &1. &2" 1003032105 no "INF" yes "RV" 16 426 "Attempt to check out an item in workspace with scm_code &1 which does not exist." "Attempt to check out an item in workspace with scm_code &1 which does not exist." 1003032126 no "INF" yes "RV" 17 426 "Attempt to checkout from workspace &2 item with object name &1, which does not exist." "Attempt to checkout from workspace &2 item with object name &1, which does not exist." 1003032128 no "INF" yes "RV" 18 426 "Attempt to checkout from workspace &3 item of subtype &1 with object name &2 which does not exist." "Attempt to checkout from workspace &3 item of subtype &1 with object name &2 which does not exist." 1003032130 no "INF" yes "RV" 19 426 "Error attempting to open dynamic query: &1" "Error attempting to open dynamic query: &1 The identifying object name (field &2) could not be determined." 1003183249 no "INF" yes "RV" 20 426 "Error retrieving first record from dynamic query: &1" "Error attempting to open dynamic query: &1 The identifying object name (field &2) could not be determined." 1003183253 no "INF" yes "RV" 21 426 "Attempt to delete object with name &1 from workspace &2 under task &3 . A deleted item record already exists for this item in the workspace, but under a different task." "Attempt to delete object with name &1 from workspace &2 under task &3. A deleted item record already exists for this item in the workspace, but under a different task." 1003183287 no "INF" yes "RV" 22 426 "You cannot create data item for &1 since this is already a configuration item in its own right. Use your SCM tool to assign the item to this workspace." "You cannot create data item for &1 since this is already a configuration item in its own right. Use your SCM tool to assign the item to this workspace." 1003203002 no "INF" yes "RV" 23 426 "Could not find Configuration Item with name &1 and type &2 when performing deletion checks." "Could not find Configuration Item with name &1 and type &2 when performing deletion checks." 1003223586 no "INF" yes "RV" 24 426 "Attempt to modify an item with object name &1 which is not checked out in workspace &2." "Attempt to modify an item with object name &1 which is not checked out in workspace &2." 1003223702 no "INF" yes "RV" 25 426 "Attempt to modify items within the context of task &1 which is not an open task." "Attempt to modify items within the context of task &1 which is not an open task." 1003223706 no "INF" yes "RV" 26 426 "Attempt to create data corresponding to an object name &1 which exists in your SCM tool but has not been assigned to workspace &2." "Attempt to create data corresponding to an object name &1 which exists in your SCM tool but has not been assigned to workspace &2." 1003249904 no "INF" yes "RV" 27 426 "Attempt to create data corresponding to an object named &1 which is not checked out in your SCM tool under workspace &2." "Attempt to create data corresponding to an object named &1 which is not checked out in your SCM tool under workspace &2." 1003249905 no "INF" yes "RV" 28 426 "Attempt to create data corresponding to an object named &1 under task &2, when that object is checked out in your SCM toool under task &3." "Attempt to create data corresponding to an object named &1 under task &2, when that object is checked out in your SCM tool under task &3." 1003249906 no "INF" yes "RV" 29 426 "Unable to escalate lock status to Exclusive for &1 record." "Unable to escalate lock status to Exclusive for &1 record. The record was found NO-LOCK, but the subsequent FIND CURRENT &1 EXCLUSIVE-LOCK NO-WAIT has reported that the record was locked by another session." 1003289550 no "INF" yes "RY" 1 426 "Object &1 is not defined in the repository." "Object &1 is not defined in the repository." 1003496757 no "ERR" yes "RY" 2 426 "The object name &1 does not exist in the &2 wizard table." "The object name &1 does not exist in the &2 wizard table." 1003596940 no "ERR" yes "RY" 3 426 "The physical object name &1 does not exist." "The physical object name &1 does not exist. This name is hard-coded in the wizard generation program ry/app/rywizogenp.p and so must exist in order to forward generate dynamic objects based on this generic object template. " 1003597140 no "ERR" yes "RY" 4 426 "The object type &1 does not exist." "The object type &1 does not exist. This name is hard-coded in the wizard generation program ry/app/rywizogenp.p and so must exist in order to forward generate dynamic objects based on this object type. " 1003597141 no "ERR" yes "RY" 5 426 "Unsupported object type &1 passed to forward generate program." "Unsupported object type &1 passed to forward generate program ry/app/rywizogenp.p. The supported object types for forward generation are menc,objc,fold,view,brow. " 1003597179 no "ERR" yes "RY" 6 426 "Cannot launch container &1." "Cannot launch container &1. The likely cause is the object does not exist yet in the ICFDB object table gsc_object, or is set-up incorrectly. For logical objects ensure the physical object name is specified correctly. Also ensure the object exists in the repository database table ryc_smartobject. " 1003602711 no "ERR" yes "RY" 7 426 "An extension should not be specified for a logical object." "An extension should not be specified for a logical object." 1003604536 no "ERR" yes "RY" 8 426 "A physical file name should be specified for a logical object." "A physical file name should be specified for a logical object." 1003604772 no "ERR" yes "RY" 9 426 "You are attempting to &1 on a non-indexed field or are using the index inefficiently. This could potentially make your query slow. Do you want to continue?" "You are attempting to &1 on a non-indexed field or are using the index inefficiently. This could potentially make your query slow. Do you want to continue?" 1003607408 no "WAR" yes "RY" 10 426 "Concurrent multiple lookups not supported" "A lookup is already running that is using the data set required for the lookup you have just chosen. Close the currently running lookup to be able to run the new lookup." 1003653986 no "ERR" yes "RY" 11 426 "This folder window will be shut down as all tabs are disabled." "Due to the fact that all the tabs for this program were programmatically disabled, the folder will now shut down." 1003981540 no "ERR" yes "RY" 12 426 "Object &1 cannot be moved to object type &2 as &2 is not related" "Object &1 cannot be moved to object type &2 as &2 is not a parent or child of the existing object type (&3) of object &1. Objects may only be moved within the hierarchy in which they exist." 3000040688.09 no "ERR" yes "RY" 13 426 "The &1 class does not inherit from the &2 class." "The &1 class does not inherit from the &2 class. &3" 36362.48 no "ERR" yes "RY" 14 426 "Datafield &1 has no master object in the repository." "Datafield &1 has no master object in the repository. Run the Object Generator or the Entity import tool to create it." 33495.409 no "ERR" yes "RY" 15 426 "Unable to locate &1 in the repository." "Unable to locate &1 in the repository. Please register it." 33635.409 no "ERR" yes "RY" 16 426 "Unable to find data source &1." "Unable to find data source &1. Cannot add fields to viewer." 33649.409 no "ERR" yes "RY" 17 426 "Unable to run datasource &1. Cannot add fields to viewer." "Unable to run datasource &1. Cannot add fields to viewer." 33653.409 no "ERR" yes "RY" 18 426 "Unable to start SBO contained SDO &1." "Unable to start SBO contained SDO &1." 33665.409 no "ERR" yes "RY" 19 426 "Associated datasource &1 has not been registered in the repositiory." "Associated datasource &1 has not been registered in the repositiory because" 33682.409 no "ERR" yes "RY" 20 426 "Do you want to continue to close this window and all its children?" "The window you are closing has child windows open. Do you want to continue to close this window and all its children?" 3000050103.09 no "QUE" yes "RY" 21 426 "Translation causes resizing out of session scope" "The translations assigned to the viewer will require the viewer to be sized wider than your current session width. You should try to enter shorter translations for these objects or increase the size of your screen resolution." 128278.9875 no "WAR" yes "SCM" 1 426 "&1 &2 SCM Xref information is not available" "&1 &2 SCM Xref information is not available in the SCM Xref Table. Check the SCM Xref maintenance to ensure that a valid reference exists between the object type and a valid SCM object type." 1000009936.81 no "ERR" yes "SCM" 2 426 "&1 &2 cannot be changed to &3 as the SCM Xref data does not match" "&1 &2 cannot be changed to &3 as the SCM Xref data does not match. The &1 for &2 and &3 must be linked to the same SCM &1 in the SCM Xref table. Select a new &1 where the SCM Xref data is the same as for &2." 1000009938.81 no "ERR" yes . PSC filename=gsc_error records=0000000000224 ldbname=ICFDB timestamp=2003/10/20-17:49:47 numformat=44,46 dateformat=mdy-1950 map=NO-MAP cpstream=utf-8 . 0000044486