&ANALYZE-SUSPEND _VERSION-NUMBER UIB_v8r12 &ANALYZE-RESUME {adecomm/appserv.i} DEFINE VARIABLE h_Astra AS HANDLE NO-UNDO. &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Check Version Notes Wizard" DataLogicProcedure _INLINE /* Actions: af/cod/aftemwizcw.w ? ? ? ? */ /* MIP Update Version Notes Wizard Check object version notes. af/cod/aftemwizpw.w */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Update-Object-Version" DataLogicProcedure _INLINE /* Actions: ? ? ? ? af/sup/afverxftrp.p */ /* This has to go above the definitions sections, as that is what it modifies. If its not, then the definitions section will have been saved before the XFTR code kicks in and changes it */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Definition Comments Wizard" DataLogicProcedure _INLINE /* Actions: ? af/cod/aftemwizcw.w ? ? ? */ /* Program Definition Comment Block Wizard Welcome to the Program Definition Comment Block Wizard. Press Next to proceed. af/cod/aftemwizpw.w */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _DEFINITIONS DataLogicProcedure /********************************************************************* * Copyright (C) 2000 by Progress Software Corporation ("PSC"), * * 14 Oak Park, Bedford, MA 01730, and other contributors as listed * * below. All Rights Reserved. * * * * The Initial Developer of the Original Code is PSC. The Original * * Code is Progress IDE code released to open source December 1, 2000.* * * * The contents of this file are subject to the Possenet Public * * License Version 1.0 (the "License"); you may not use this file * * except in compliance with the License. A copy of the License is * * available as of the date of this notice at * * http://www.possenet.org/license.html * * * * Software distributed under the License is distributed on an "AS IS"* * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. You* * should refer to the License for the specific language governing * * rights and limitations under the License. * * * * Contributors: * * * *********************************************************************/ /*--------------------------------------------------------------------------------- File: rytemlogic.p Description: ryc_smartobject Data Logic Procedure Library Template Purpose: A procedure library (PLIP) to support the maintenance of the ryc_smartobject table The following internal procedures may be added or modified to act as validation to creation, modification, or deletion of records in the database table Client-side: rowObjectValidate*** Server-side upon create: createPreTransValidate*** createBeginTransValidate createEndTransValidate createPostTransValidate Server-side upon write (create and modify): writePreTransValidate*** writeBeginTransValidate writeEndTransValidate writePostTransValidate Server-side upon delete: deletePreTransValidate deleteBeginTransValidate deleteEndTransValidate deletePostTransValidate *** The rowObjectValidate, createPreTransValidate and writePreTransValidate internal procedures are automatically generated by the SDO generator Parameters: History: -------- (v:010000) Task: 90000033 UserRef: POSSE Date: 20/04/2001 Author: Phil Magnay Update Notes: Data Logic Procedure Auto-Generation (v:010001) Task: 90000119 UserRef: posse Date: 06/05/2001 Author: Haavard Danielsen Update Notes: Point to src/adm2/logic.i ---------------------------------------------------------------------------------*/ /* This .W file was created with the Progress UIB. */ /*-------------------------------------------------------------------------------*/ /* *************************** Definitions ************************** */ /* MIP-GET-OBJECT-VERSION pre-processors The following pre-processors are maintained automatically when the object is saved. They pull the object and version from Roundtable if possible so that it can be displayed in the about window of the container */ &scop object-name rycsolog2p.p DEFINE VARIABLE lv_this_object_name AS CHARACTER INITIAL "{&object-name}":U NO-UNDO. &scop object-version 000000 /* Astra object identifying preprocessor */ &glob AstraPlip yes DEFINE VARIABLE cObjectName AS CHARACTER NO-UNDO. DEFINE VARIABLE gcSmartObjectObjBI AS DECIMAL NO-UNDO. ASSIGN cObjectName = "{&object-name}":U. &scop mip-notify-user-on-plip-close NO /* Data Preprocessor Definitions */ &GLOB DATA-LOGIC-TABLE ryc_smartobject &GLOB DATA-FIELD-DEFS "ry/obj/rycsoful2o.i" /* Error handling definitions */ {af/sup2/afcheckerr.i &define-only = YES} /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-PREPROCESSOR-BLOCK /* ******************** Preprocessor Definitions ******************** */ &Scoped-define PROCEDURE-TYPE DataLogicProcedure &Scoped-define DB-AWARE yes /* Db-Required definitions. */ &IF DEFINED(DB-REQUIRED) = 0 &THEN &GLOBAL-DEFINE DB-REQUIRED TRUE &ENDIF &GLOBAL-DEFINE DB-REQUIRED-START &IF {&DB-REQUIRED} &THEN &GLOBAL-DEFINE DB-REQUIRED-END &ENDIF /* _UIB-PREPROCESSOR-BLOCK-END */ &ANALYZE-RESUME /* ************************ Function Prototypes ********************** */ &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD isFieldBlank DataLogicProcedure FUNCTION isFieldBlank RETURNS LOGICAL ( INPUT pcFieldValue AS CHARACTER ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME /* *********************** Procedure Settings ************************ */ &ANALYZE-SUSPEND _PROCEDURE-SETTINGS /* Settings for THIS-PROCEDURE Type: DataLogicProcedure Allow: Frames: 0 Add Fields to: Neither Other Settings: CODE-ONLY COMPILE APPSERVER DB-AWARE */ &ANALYZE-RESUME _END-PROCEDURE-SETTINGS /* ************************* Create Window ************************** */ &ANALYZE-SUSPEND _CREATE-WINDOW /* DESIGN Window definition (used by the UIB) CREATE WINDOW DataLogicProcedure ASSIGN HEIGHT = 13.71 WIDTH = 59.8. /* END WINDOW DEFINITION */ */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _INCLUDED-LIB DataLogicProcedure /* ************************* Included-Libraries *********************** */ {src/adm2/logic.i} /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _MAIN-BLOCK DataLogicProcedure /* *************************** Main Block ******************************* */ {ry/app/ryplipmain.i} /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME /* ********************** Internal Procedures *********************** */ {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE createBeginTransValidate DataLogicProcedure _DB-REQUIRED PROCEDURE createBeginTransValidate : /*------------------------------------------------------------------------------ Purpose: Checks whether the object being copied belongs to the SmartToolbar class. If so, it Copies all child bands. Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cToolbarClasses AS CHARACTER NO-UNDO. /* Check whether object is a smartToolbar logical object and a copy is being performed. */ FIND gsc_object_type NO-LOCK WHERE gsc_object_type.object_type_obj = b_ryc_smartObject.OBJECT_type_obj NO-ERROR. IF AVAILABLE gsc_object_type THEN DO: ASSIGN cToolbarClasses = DYNAMIC-FUNCTION("getClassChildrenFromDB":U IN gshRepositoryManager, INPUT "SmartToolbar"). IF LOOKUP(gsc_object_type.object_type_code,cToolbarClasses) > 0 THEN ASSIGN gcSmartObjectObjBI = b_ryc_smartObject.smartObject_obj. END. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE createEndTransValidate DataLogicProcedure _DB-REQUIRED PROCEDURE createEndTransValidate : /*------------------------------------------------------------------------------ Purpose: Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cMessageList AS CHARACTER NO-UNDO. /* If no security object exists, make this object secure itself. */ IF b_ryc_smartobject.security_smartobject_obj EQ 0 OR b_ryc_smartobject.security_smartobject_obj EQ ? THEN DO: FIND ryc_smartobject WHERE ryc_smartobject.smartobject_obj = b_ryc_smartobject.smartobject_obj EXCLUSIVE-LOCK NO-WAIT NO-ERROR. IF LOCKED ryc_smartobject THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList, CHR(3)) EQ 0 THEN "":U ELSE CHR(3)) + {af/sup2/aferrortxt.i 'AF' '104' 'ryc_smartobject' '?' '"update the object record"'}. ELSE IF AVAILABLE ryc_smartobject THEN DO: ASSIGN ryc_smartobject.security_smartobject_obj = ryc_smartobject.smartobject_obj. VALIDATE ryc_smartobject NO-ERROR. ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList, CHR(3)) EQ 0 THEN "":U ELSE CHR(3)) + RETURN-VALUE. END. END. /* If a smartToolbar was created, copy all child bands */ DEFINE BUFFER b_gsm_toolbar_menu_structure FOR gsm_toolbar_menu_structure. IF cMessageList = "" AND gcSmartObjectObjBI > 0 THEN DO: FOR EACH gsm_toolbar_menu_structure NO-LOCK WHERE gsm_toolbar_menu_structure.OBJECT_obj = gcSmartObjectObjBI : CREATE b_gsm_toolbar_menu_structure. BUFFER-COPY gsm_toolbar_menu_structure EXCEPT OBJECT_obj toolbar_menu_structure_obj TO b_gsm_toolbar_menu_structure. ASSIGN b_gsm_toolbar_menu_structure.OBJECT_obj = b_ryc_smartObject.smartobject_obj. END. ASSIGN gcSmartObjectObjBI = 0. END. ASSIGN ERROR-STATUS:ERROR = NO. RETURN cMessageList. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE createPreTransValidate DataLogicProcedure _DB-REQUIRED PROCEDURE createPreTransValidate : /*------------------------------------------------------------------------------ Purpose: Procedure used to validate records server-side before the transaction scope upon create Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cMessageList AS CHARACTER NO-UNDO. DEFINE VARIABLE cValueList AS CHARACTER NO-UNDO. IF CAN-FIND(FIRST ryc_smartobject WHERE ryc_smartobject.object_filename = b_ryc_smartobject.object_filename AND ryc_smartobject.customization_result_obj = b_ryc_smartobject.customization_result_obj) THEN DO: ASSIGN cValueList = STRING(b_ryc_smartobject.object_filename) + ', ' + STRING(b_ryc_smartobject.customization_result_obj) cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '8' 'ryc_smartobject' '' "'object_filename, customization_result_obj, '" cValueList }. END. IF CAN-FIND(FIRST ryc_smartobject WHERE ryc_smartobject.product_module_obj = b_ryc_smartobject.product_module_obj AND ryc_smartobject.object_filename = b_ryc_smartobject.object_filename AND ryc_smartobject.customization_result_obj = b_ryc_smartobject.customization_result_obj) THEN DO: ASSIGN cValueList = STRING(b_ryc_smartobject.product_module_obj) + ', ' + STRING(b_ryc_smartobject.object_filename) + ', ' + STRING(b_ryc_smartobject.customization_result_obj) cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '8' 'ryc_smartobject' '' "'product_module_obj, object_filename, customization_result_obj, '" cValueList }. END. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE deletePreTransValidate DataLogicProcedure _DB-REQUIRED PROCEDURE deletePreTransValidate : /*------------------------------------------------------------------------------ Purpose: Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cMessageList AS CHARACTER NO-UNDO. ASSIGN cMessageList = "":U. /* Check that we do not delete an object where the object is used as an * * instance on another object */ IF CAN-FIND(FIRST ryc_object_instance WHERE ryc_object_instance.smartobject_obj = b_ryc_smartobject.smartobject_obj) THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {af/sup2/aferrortxt.i 'AF' '101' 'ryc_smartobject' '' "'object'" "'object instance'" "'This object is used as an instance on another object and may not be deleted.'"}. IF cMessageList = "":U THEN DO: /* Cascade delete all Instances on object, all Links, all attributes, all pages and all UI Events. */ /* DELETE OBJECT INSTANCES */ SESSION:SET-WAIT-STATE("GENERAL":U). FOR EACH ryc_object_instance WHERE ryc_object_instance.container_smartobject_obj = b_ryc_smartobject.smartobject_obj EXCLUSIVE-LOCK: /* DELETE OBJECT INSTANCE ATTRIBUTE VALUES */ FOR EACH ryc_attribute_value WHERE ryc_attribute_value.object_type_obj <> 0 AND ryc_attribute_value.container_smartobject_obj = b_ryc_smartobject.smartobject_obj AND ryc_attribute_value.smartobject_obj = ryc_object_instance.smartobject_obj AND ryc_attribute_value.object_instance_obj = ryc_object_instance.object_instance_obj EXCLUSIVE-LOCK: DELETE ryc_attribute_value. IF RETURN-VALUE <> "":U THEN DO: cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + RETURN-VALUE. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END. END. /* DELETE OBJECT INSTANCE UI EVENTS */ FOR EACH ryc_ui_event WHERE ryc_ui_event.object_type_obj <> 0 AND ryc_ui_event.container_smartobject_obj = b_ryc_smartobject.smartobject_obj AND ryc_ui_event.smartobject_obj = ryc_object_instance.smartobject_obj AND ryc_ui_event.object_instance_obj = ryc_object_instance.object_instance_obj EXCLUSIVE-LOCK: DELETE ryc_ui_event. IF RETURN-VALUE <> "":U THEN DO: cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + RETURN-VALUE. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END. END. DELETE ryc_object_instance. IF RETURN-VALUE <> "":U THEN DO: cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + RETURN-VALUE. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END. END. /* DELETE ATTRIBUTE VALUES */ FOR EACH ryc_attribute_value WHERE ryc_attribute_value.object_type_obj = b_ryc_smartobject.object_type_obj AND ryc_attribute_value.container_smartobject_obj = 0 AND ryc_attribute_value.smartobject_obj = b_ryc_smartobject.smartobject_obj AND ryc_attribute_value.object_instance_obj = 0 EXCLUSIVE-LOCK: DELETE ryc_attribute_value. IF RETURN-VALUE <> "":U THEN DO: cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + RETURN-VALUE. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END. END. /* DELETE UI EVENTS */ FOR EACH ryc_ui_event WHERE ryc_ui_event.object_type_obj = b_ryc_smartobject.object_type_obj AND ryc_ui_event.container_smartobject_obj = 0 AND ryc_ui_event.smartobject_obj = b_ryc_smartobject.smartobject_obj AND ryc_ui_event.object_instance_obj = 0 EXCLUSIVE-LOCK: DELETE ryc_ui_event. IF RETURN-VALUE <> "":U THEN DO: cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + RETURN-VALUE. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END. END. /* DELETE LINKS */ FOR EACH ryc_smartlink WHERE ryc_smartlink.container_smartobject_obj = b_ryc_smartobject.smartobject_obj EXCLUSIVE-LOCK: DELETE ryc_smartlink. IF RETURN-VALUE <> "":U THEN DO: cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + RETURN-VALUE. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END. END. /* DELETE PAGES */ FOR EACH ryc_page WHERE ryc_page.container_smartobject_obj = b_ryc_smartobject.smartobject_obj EXCLUSIVE-LOCK: DELETE ryc_page. IF RETURN-VALUE <> "":U THEN DO: cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + RETURN-VALUE. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END. END. SESSION:SET-WAIT-STATE("":U). END. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE killPlip DataLogicProcedure PROCEDURE killPlip : /*------------------------------------------------------------------------------ Purpose: entry point to instantly kill the plip if it should get lost in memory Parameters: Notes: ------------------------------------------------------------------------------*/ {ry/app/ryplipkill.i} END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE objectDescription DataLogicProcedure PROCEDURE objectDescription : /*------------------------------------------------------------------------------ Purpose: Pass out a description of the PLIP, used in Plip temp-table Parameters: Notes: This should be changed manually for each plip ------------------------------------------------------------------------------*/ DEFINE OUTPUT PARAMETER cDescription AS CHARACTER NO-UNDO. ASSIGN cDescription = "Dynamics ryc_smartobject Data Logic Procedure #2". END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE plipSetup DataLogicProcedure PROCEDURE plipSetup : /*------------------------------------------------------------------------------ Purpose: Run by main-block of PLIP at startup of PLIP Parameters: Notes: ------------------------------------------------------------------------------*/ {ry/app/ryplipsetu.i} END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE plipShutdown DataLogicProcedure PROCEDURE plipShutdown : /*------------------------------------------------------------------------------ Purpose: This procedure will be run just before the calling program terminates Parameters: Notes: ------------------------------------------------------------------------------*/ {ry/app/ryplipshut.i} END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE rowObjectValidate DataLogicProcedure PROCEDURE rowObjectValidate : /*------------------------------------------------------------------------------ Purpose: Procedure used to validate RowObject record client-side Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cMessageList AS CHARACTER NO-UNDO. DEFINE VARIABLE cValueList AS CHARACTER NO-UNDO. IF isFieldBlank(b_ryc_smartobject.object_filename) THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '1' 'ryc_smartobject' 'object_filename' "'Object Filename'"}. IF b_ryc_smartobject.product_module_obj = 0 OR b_ryc_smartobject.product_module_obj = ? THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '1' 'ryc_smartobject' 'product_module_obj' "'Product Module Obj'"}. IF b_ryc_smartObject.container_object AND b_ryc_smartobject.runnable_from_menu = ? THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '1' 'ryc_smartobject' 'runnable_from_menu' "'Runnable From Menu'"}. IF b_ryc_smartObject.container_object AND (b_ryc_smartobject.layout_obj = 0 OR b_ryc_smartobject.layout_obj = ?) THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '1' 'ryc_smartobject' 'layout_obj' "'Layout Obj'"}. IF b_ryc_smartobject.object_type_obj = 0 OR b_ryc_smartobject.object_type_obj = ? THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '1' 'ryc_smartobject' 'object_type_obj' "'Object Type Obj'"}. /** Issue #6736 requests that we allow the changing of the object types /* ObjType - The object exists already, if the object type is being changed, raise an error */ IF NOT isCreate() THEN IF AVAILABLE old_ryc_smartobject AND AVAILABLE b_ryc_smartobject AND old_ryc_smartobject.object_type_obj <> b_ryc_smartobject.object_type_obj THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '36' 'ryc_smartobject' 'object_type_obj' "'the repository object'" "'object types can not be updated once assigned'"}. ***************************/ IF isFieldBlank(b_ryc_smartobject.object_description) THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '1' 'ryc_smartobject' 'object_description' "'Object Description'"}. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE writePreTransValidate DataLogicProcedure _DB-REQUIRED PROCEDURE writePreTransValidate : /*------------------------------------------------------------------------------ Purpose: Procedure used to validate records server-side before the transaction scope upon write Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cMessageList AS CHARACTER NO-UNDO. DEFINE VARIABLE cValueList AS CHARACTER NO-UNDO. DEFINE VARIABLE iCnt AS INTEGER NO-UNDO. DEFINE VARIABLE cToolbarChildren AS CHARACTER NO-UNDO. DEFINE VARIABLE lCheckChanged AS LOGICAL NO-UNDO. IF NOT isCreate() AND CAN-FIND(FIRST ryc_smartobject WHERE ryc_smartobject.object_filename = b_ryc_smartobject.object_filename AND ryc_smartobject.customization_result_obj = b_ryc_smartobject.customization_result_obj AND ROWID(ryc_smartobject) <> TO-ROWID(ENTRY(1,b_ryc_smartobject.RowIDent))) THEN DO: ASSIGN cValueList = STRING(b_ryc_smartobject.object_filename) + ', ' + STRING(b_ryc_smartobject.customization_result_obj) cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '8' 'ryc_smartobject' '' "'object_filename, customization_result_obj, '" cValueList }. END. IF NOT isCreate() AND CAN-FIND(FIRST ryc_smartobject WHERE ryc_smartobject.product_module_obj = b_ryc_smartobject.product_module_obj AND ryc_smartobject.object_filename = b_ryc_smartobject.object_filename AND ryc_smartobject.customization_result_obj = b_ryc_smartobject.customization_result_obj AND ROWID(ryc_smartobject) <> TO-ROWID(ENTRY(1,b_ryc_smartobject.RowIDent))) THEN DO: ASSIGN cValueList = STRING(b_ryc_smartobject.product_module_obj) + ', ' + STRING(b_ryc_smartobject.object_filename) + ', ' + STRING(b_ryc_smartobject.customization_result_obj) cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '8' 'ryc_smartobject' '' "'product_module_obj, object_filename, customization_result_obj, '" cValueList }. END. /* Ensure that toolbar security objects are not zero. Issue 2393 (Don B)*/ IF b_ryc_smartobject.security_smartobject_obj = 0 THEN DO: ASSIGN cToolbarChildren = DYNAMIC-FUNCTION("getClassChildrenFromDB":U IN gshRepositoryManager, INPUT "SmartToolbar"). DO iCnt = 1 TO NUM-ENTRIES(cToolbarChildren): FIND gsc_object_type NO-LOCK WHERE gsc_object_type.object_type_code = ENTRY(iCnt, cToolbarChildren) NO-ERROR. IF AVAILABLE gsc_object_type THEN IF b_ryc_smartobject.object_type_obj = gsc_object_type.object_type_obj THEN ASSIGN b_ryc_smartobject.security_smartobject_obj = b_ryc_smartobject.smartobject_obj. END. END. IF b_ryc_smartobject.deployment_type = ? THEN b_ryc_smartobject.deployment_type = "":U. /* Change the Obejct Type before any other updates */ IF NOT isCreate() AND b_ryc_smartobject.object_type_obj NE old_ryc_smartobject.object_type_obj THEN DO: /* Changing the object type will cause errors when we try to commit any further changes * to this record. Make sure that we turn the checking off. */ {get CheckCurrentChanged lCheckChanged}. {set CheckCurrentChanged NO}. RUN changeObjectType IN gshRepositoryManager ( INPUT b_ryc_smartobject.smartobject_obj, INPUT b_ryc_smartobject.object_type_obj, INPUT old_ryc_smartobject.object_type_obj ) NO-ERROR. /* Reset to previous value. */ {set CheckCurrentChanged lCheckChanged}. IF ERROR-STATUS:ERROR OR RETURN-VALUE NE "":U THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + RETURN-VALUE. END. /* object type has changed. */ ASSIGN ERROR-STATUS:ERROR = NO. RETURN cMessageList. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} /* ************************ Function Implementations ***************** */ &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION isFieldBlank DataLogicProcedure FUNCTION isFieldBlank RETURNS LOGICAL ( INPUT pcFieldValue AS CHARACTER ) : /*------------------------------------------------------------------------------ Purpose: Checks whether a character field is blank Notes: ------------------------------------------------------------------------------*/ IF LENGTH(TRIM(pcFieldValue)) = 0 OR LENGTH(TRIM(pcFieldValue)) = ? THEN RETURN TRUE. ELSE RETURN FALSE. /* Function return value. */ END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME