&ANALYZE-SUSPEND _VERSION-NUMBER AB_v9r12 /* Procedure Description "Data Logic Procedure Template Use this template to create a Data Logic Procedure." */ &ANALYZE-RESUME {adecomm/appserv.i} DEFINE VARIABLE h_Astra AS HANDLE NO-UNDO. DEFINE VARIABLE h_Astra2 AS HANDLE NO-UNDO. &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Check Version Notes Wizard" DataLogicProcedure _INLINE /* Actions: af/cod/aftemwizcw.w ? ? ? ? */ /* MIP Update Version Notes Wizard Check object version notes. af/cod/aftemwizpw.w */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Update-Object-Version" DataLogicProcedure _INLINE /* Actions: ? ? ? ? af/sup/afverxftrp.p */ /* This has to go above the definitions sections, as that is what it modifies. If its not, then the definitions section will have been saved before the XFTR code kicks in and changes it */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _XFTR "Definition Comments Wizard" DataLogicProcedure _INLINE /* Actions: ? af/cod/aftemwizcw.w ? ? ? */ /* Program Definition Comment Block Wizard Welcome to the Program Definition Comment Block Wizard. Press Next to proceed. af/cod/aftemwizpw.w */ /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _DEFINITIONS DataLogicProcedure /********************************************************************* * Copyright (C) 2000 by Progress Software Corporation ("PSC"), * * 14 Oak Park, Bedford, MA 01730, and other contributors as listed * * below. All Rights Reserved. * * * * The Initial Developer of the Original Code is PSC. The Original * * Code is Progress IDE code released to open source December 1, 2000.* * * * The contents of this file are subject to the Possenet Public * * License Version 1.0 (the "License"); you may not use this file * * except in compliance with the License. A copy of the License is * * available as of the date of this notice at * * http://www.possenet.org/license.html * * * * Software distributed under the License is distributed on an "AS IS"* * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. You* * should refer to the License for the specific language governing * * rights and limitations under the License. * * * * Contributors: * * * *********************************************************************/ /*--------------------------------------------------------------------------------- File: rytemlogic.p Description: ryc_ui_event Data Logic Procedure Library Template Purpose: A procedure library (PLIP) to support the maintenance of the ryc_ui_event table The following internal procedures may be added or modified to act as validation to creation, modification, or deletion of records in the database table Client-side: rowObjectValidate*** Server-side upon create: createPreTransValidate*** createBeginTransValidate createEndTransValidate createPostTransValidate Server-side upon write (create and modify): writePreTransValidate*** writeBeginTransValidate writeEndTransValidate writePostTransValidate Server-side upon delete: deletePreTransValidate deleteBeginTransValidate deleteEndTransValidate deletePostTransValidate *** The rowObjectValidate, createPreTransValidate and writePreTransValidate internal procedures are automatically generated by the SDO generator Parameters: History: -------- (v:010000) Task: 101000047 UserRef: Date: 09/28/2001 Author: Johan Meyer Update Notes: Added function isFieldBlank to template of SDO Logic Procedure (v:010001) Task: 90000119 UserRef: posse Date: 06/05/2001 Author: Haavard Danielsen Update Notes: Point to src/adm2/logic.i ---------------------------------------------------------------------------------*/ /* This .W file was created with the Progress UIB. */ /*-------------------------------------------------------------------------------*/ /* *************************** Definitions ************************** */ /* MIP-GET-OBJECT-VERSION pre-processors The following pre-processors are maintained automatically when the object is saved. They pull the object and version from Roundtable if possible so that it can be displayed in the about window of the container */ &scop object-name rycuelog1p.p DEFINE VARIABLE lv_this_object_name AS CHARACTER INITIAL "{&object-name}":U NO-UNDO. &scop object-version 000000 /* object identifying preprocessor */ &glob AstraPlip yes DEFINE VARIABLE cObjectName AS CHARACTER NO-UNDO. ASSIGN cObjectName = "{&object-name}":U. &scop mip-notify-user-on-plip-close NO /* Data Preprocessor Definitions */ &GLOB DATA-LOGIC-TABLE ryc_ui_event &GLOB DATA-FIELD-DEFS "ry/obj/rycueful1o.i" /* Error handling definitions */ {checkerr.i &define-only = YES} /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-PREPROCESSOR-BLOCK /* ******************** Preprocessor Definitions ******************** */ &Scoped-define PROCEDURE-TYPE DataLogicProcedure &Scoped-define DB-AWARE yes /* Db-Required definitions. */ &IF DEFINED(DB-REQUIRED) = 0 &THEN &GLOBAL-DEFINE DB-REQUIRED TRUE &ENDIF &GLOBAL-DEFINE DB-REQUIRED-START &IF {&DB-REQUIRED} &THEN &GLOBAL-DEFINE DB-REQUIRED-END &ENDIF /* _UIB-PREPROCESSOR-BLOCK-END */ &ANALYZE-RESUME /* ************************ Function Prototypes ********************** */ {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD getSDOLevel DataLogicProcedure _DB-REQUIRED FUNCTION getSDOLevel RETURNS CHARACTER ( /* parameter-definitions */ ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION-FORWARD isFieldBlank DataLogicProcedure FUNCTION isFieldBlank RETURNS LOGICAL ( INPUT pcFieldValue AS CHARACTER ) FORWARD. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME /* *********************** Procedure Settings ************************ */ &ANALYZE-SUSPEND _PROCEDURE-SETTINGS /* Settings for THIS-PROCEDURE Type: DataLogicProcedure Allow: Frames: 0 Add Fields to: Neither Other Settings: CODE-ONLY COMPILE APPSERVER DB-AWARE */ &ANALYZE-RESUME _END-PROCEDURE-SETTINGS /* ************************* Create Window ************************** */ &ANALYZE-SUSPEND _CREATE-WINDOW /* DESIGN Window definition (used by the UIB) CREATE WINDOW DataLogicProcedure ASSIGN HEIGHT = 12.1 WIDTH = 45. /* END WINDOW DEFINITION */ */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _INCLUDED-LIB DataLogicProcedure /* ************************* Included-Libraries *********************** */ {src/adm2/logic.i} /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _CUSTOM _MAIN-BLOCK DataLogicProcedure /* *************************** Main Block ******************************* */ {ry/app/ryplipmain.i} /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME /* ********************** Internal Procedures *********************** */ {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE createPreTransValidate DataLogicProcedure _DB-REQUIRED PROCEDURE createPreTransValidate : /*------------------------------------------------------------------------------ Purpose: Procedure used to validate records server-side before the transaction scope upon create Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cMessageList AS CHARACTER NO-UNDO. DEFINE VARIABLE cValueList AS CHARACTER NO-UNDO. IF CAN-FIND(FIRST ryc_ui_event WHERE ryc_ui_event.object_type_obj = b_ryc_ui_event.object_type_obj AND ryc_ui_event.smartobject_obj = b_ryc_ui_event.smartobject_obj AND ryc_ui_event.object_instance_obj = b_ryc_ui_event.object_instance_obj AND ryc_ui_event.event_name = b_ryc_ui_event.event_name AND ryc_ui_event.container_smartobject_obj = b_ryc_ui_event.container_smartobject_obj) THEN DO: ASSIGN cValueList = STRING(b_ryc_ui_event.object_type_obj) + ', ' + STRING(b_ryc_ui_event.smartobject_obj) + ', ' + STRING(b_ryc_ui_event.object_instance_obj) + ', ' + STRING(b_ryc_ui_event.event_name) + ', ' + STRING(b_ryc_ui_event.container_smartobject_obj) cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '8' 'ryc_ui_event' '' "'object_type_obj, smartobject_obj, object_instance_obj, event_name, container_smartobject_obj, '" cValueList }. END. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE killPlip DataLogicProcedure PROCEDURE killPlip : /*------------------------------------------------------------------------------ Purpose: entry point to instantly kill the plip if it should get lost in memory Parameters: Notes: ------------------------------------------------------------------------------*/ {ry/app/ryplipkill.i} END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE objectDescription DataLogicProcedure PROCEDURE objectDescription : /*------------------------------------------------------------------------------ Purpose: Pass out a description of the PLIP, used in Plip temp-table Parameters: Notes: This should be changed manually for each plip ------------------------------------------------------------------------------*/ DEFINE OUTPUT PARAMETER cDescription AS CHARACTER NO-UNDO. ASSIGN cDescription = "ryc_ui_event Data Logic Procedure". END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE plipSetup DataLogicProcedure PROCEDURE plipSetup : /*------------------------------------------------------------------------------ Purpose: Run by main-block of PLIP at startup of PLIP Parameters: Notes: ------------------------------------------------------------------------------*/ {ry/app/ryplipsetu.i} END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE plipShutdown DataLogicProcedure PROCEDURE plipShutdown : /*------------------------------------------------------------------------------ Purpose: This procedure will be run just before the calling program terminates Parameters: Notes: ------------------------------------------------------------------------------*/ {ry/app/ryplipshut.i} END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE rowObjectValidate DataLogicProcedure PROCEDURE rowObjectValidate : /*------------------------------------------------------------------------------ Purpose: Procedure used to validate RowObject record client-side Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cMessageList AS CHARACTER NO-UNDO. DEFINE VARIABLE cValueList AS CHARACTER NO-UNDO. DEFINE VARIABLE hDesignManager AS HANDLE NO-UNDO. DEFINE VARIABLE cObjectTypeCode AS CHARACTER NO-UNDO. DEFINE VARIABLE lFoundUIEvent AS LOGICAL NO-UNDO. IF b_ryc_ui_event.object_type_obj = 0 OR b_ryc_ui_event.object_type_obj = ? THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '1' 'ryc_ui_event' 'object_type_obj' "'Object Type Obj'"}. IF isFieldBlank(b_ryc_ui_event.event_name) THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '1' 'ryc_ui_event' 'event_name' "'Event Name'"}. /* Check if UI Event is valid for this object type */ IF b_ryc_ui_event.smartobject_obj <> 0 THEN DO: hDesignManager = DYNAMIC-FUNCTION("getManagerHandle":U, INPUT "RepositoryDesignManager":U). cObjectTypeCode = DYNAMIC-FUNCTION("getObjectTypeCodeFromDB":U IN hDesignManager, b_ryc_ui_event.object_type_obj). lFoundUIEvent = DYNAMIC-FUNCTION("classHasAttribute" IN gshRepositoryManager, cObjectTypeCode,b_ryc_ui_event.event_name,TRUE). IF NOT lFoundUIEvent THEN DO: RUN clearClientCache IN gshRepositoryManager. lFoundUIEvent = DYNAMIC-FUNCTION("classHasAttribute" IN gshRepositoryManager, cObjectTypeCode,b_ryc_ui_event.event_name,TRUE). IF NOT lFoundUIEvent THEN lFoundUIEvent = DYNAMIC-FUNCTION("classHasAttribute" IN hDesignManager, cObjectTypeCode,b_ryc_ui_event.event_name,TRUE). END. IF NOT lFoundUIEvent THEN DO: cObjectTypeCode = "The UI Event specified is not valid for the object's class. (" + cObjectTypeCode + ")":U. cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {af/sup2/aferrortxt.i 'AF' '5' 'ryc_ui_event' 'event_name' "'Event Name'" cObjectTypeCode}. END. END. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _PROCEDURE writePreTransValidate DataLogicProcedure _DB-REQUIRED PROCEDURE writePreTransValidate : /*------------------------------------------------------------------------------ Purpose: Procedure used to validate records server-side before the transaction scope upon write Parameters: Notes: ------------------------------------------------------------------------------*/ DEFINE VARIABLE cMessageList AS CHARACTER NO-UNDO. DEFINE VARIABLE cValueList AS CHARACTER NO-UNDO. DEFINE VARIABLE cValidActionTypes AS CHARACTER NO-UNDO. IF NOT isCreate() AND CAN-FIND(FIRST ryc_ui_event WHERE ryc_ui_event.object_type_obj = b_ryc_ui_event.object_type_obj AND ryc_ui_event.smartobject_obj = b_ryc_ui_event.smartobject_obj AND ryc_ui_event.object_instance_obj = b_ryc_ui_event.object_instance_obj AND ryc_ui_event.event_name = b_ryc_ui_event.event_name AND ryc_ui_event.container_smartobject_obj = b_ryc_ui_event.container_smartobject_obj AND ROWID(ryc_ui_event) <> TO-ROWID(ENTRY(1,b_ryc_ui_event.RowIDent))) THEN DO: ASSIGN cValueList = STRING(b_ryc_ui_event.object_type_obj) + ', ' + STRING(b_ryc_ui_event.smartobject_obj) + ', ' + STRING(b_ryc_ui_event.object_instance_obj) + ', ' + STRING(b_ryc_ui_event.event_name) + ', ' + STRING(b_ryc_ui_event.container_smartobject_obj) cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {aferrortxt.i 'AF' '8' 'ryc_ui_event' '' "'object_type_obj, smartobject_obj, object_instance_obj, event_name, container_smartobject_obj, '" cValueList }. END. /* Action Type */ ASSIGN cValidActionTypes = "RUN,PUBLISH":U. IF LOOKUP(b_ryc_ui_event.action_type, cValidActionTypes) EQ 0 THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {af/sup2/aferrortxt.i 'AF' '5' 'ryc_ui_event' 'action_type' "'action type'" "'The action type must one of: ' + cValidActionTypes"}. /* Action Target * The action target should be one of either SELF,CONTAINER,ANYWHERE or * a valid manager code, as per the gsc_manager_type table. */ FIND gsc_manager_type WHERE gsc_manager_type.manager_type_code = b_ryc_ui_event.action_target NO-LOCK NO-ERROR. IF NOT AVAILABLE gsc_manager_type AND LOOKUP(b_ryc_ui_event.action_target, "SELF,CONTAINER,ANYWHERE":U) EQ 0 THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {af/sup2/aferrortxt.i 'AF' '5' 'ryc_ui_event' 'action_target' "'action target'" "'The action type must either be a valid manager type or one of `SELF`,`CONTAINER` OR `ANYWHERE`.'"}. /* If the action target is ANYWHERE, the action type must be PUBLISH. */ IF b_ryc_ui_event.action_target EQ "ANYWHERE":U AND b_ryc_ui_event.action_type NE "PUBLISH":U THEN ASSIGN cMessageList = cMessageList + (IF NUM-ENTRIES(cMessageList,CHR(3)) > 0 THEN CHR(3) ELSE '':U) + {af/sup2/aferrortxt.i 'AF' '22' 'ryc_ui_event' 'action_target' "'action type'" "'`PUBLISH`'" "'action target of `ANYWHERE`'"}. ERROR-STATUS:ERROR = NO. RETURN cMessageList. END PROCEDURE. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} /* ************************ Function Implementations ***************** */ {&DB-REQUIRED-START} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION getSDOLevel DataLogicProcedure _DB-REQUIRED FUNCTION getSDOLevel RETURNS CHARACTER ( /* parameter-definitions */ ) : /*------------------------------------------------------------------------------ Purpose: This procedure returns to a caller at which level in an object heirarchy this SDO exists. This is used for maintaining UI events in a treeview, and allows us to have only one viewer. Notes: ------------------------------------------------------------------------------*/ RETURN "ObjectType":U. END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME {&DB-REQUIRED-END} &ANALYZE-SUSPEND _UIB-CODE-BLOCK _FUNCTION isFieldBlank DataLogicProcedure FUNCTION isFieldBlank RETURNS LOGICAL ( INPUT pcFieldValue AS CHARACTER ) : /*------------------------------------------------------------------------------ Purpose: Checks whether a character field is blank Notes: ------------------------------------------------------------------------------*/ IF LENGTH(TRIM(pcFieldValue)) = 0 OR LENGTH(TRIM(pcFieldValue)) = ? THEN RETURN TRUE. ELSE RETURN FALSE. /* Function return value. */ END FUNCTION. /* _UIB-CODE-BLOCK-END */ &ANALYZE-RESUME