Activity
From 01/08/2026 to 02/06/2026
02/03/2026
- 05:37 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey, looks good. You can post a diff or commit for early review.
- 05:00 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> @sessionIdClientPairs@ holds P2J security sessions, not the http sessions. You get the HttpSes... - 04:34 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> @sessionIdClientPairs@ holds P2J security sessions, not the http sessions. You get the HttpSes... - 04:32 AM Support #9709: Needed: Basic example of configuring separate client and server
- @sessionIdClientPairs@ holds P2J security sessions, not the http sessions. You get the HttpSession from the request o...
- 04:21 AM Support #9709: Needed: Basic example of configuring separate client and server
- I confused because the code of @WebDriverHander@ uses ...
- 04:09 AM Support #9709: Needed: Basic example of configuring separate client and server
- I observed that if one browser policy is enabled, then the client sessions (@InitTermListener@) are tracked by @WebSe...
- 04:04 AM Support #9709: Needed: Basic example of configuring separate client and server
- Thank you, could I use http sessions listener to track http sessions by their ids and access them from the code?
- 03:31 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> In @AuthFilter@ @HttpSession.this.getId()@ is used for @SecuritySession@. This id must be... - 02:50 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey, for the token refresh you will need some kind of request handler that will handle the ...
01/30/2026
- 05:35 PM Support #9709: Needed: Basic example of configuring separate client and server
- Constantin Asofiei wrote:
> Sergey/Hynek: I understand that this will be executed on the FWD server, but from what t... - 05:25 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey/Hynek: I understand that this will be executed on the FWD server, but from what thread? If you switch the con...
- 02:33 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey, for the token refresh you will need some kind of request handler that will handle the token refresh request f...
- 12:36 PM Support #9709: Needed: Basic example of configuring separate client and server
- @WebDriverHandler.CLIENT_UUID_RELATED_SESSION_ID_PAIRS@ is also available.
- 12:08 PM Support #9709: Needed: Basic example of configuring separate client and server
- I can have only the spawner id, @WebDriverHandler.handleStartClientRequest@ if @WebDriverHandler.spawnWorker@ was suc...
- 11:57 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Hynek, could you help with FWD API to call the client api from the server side on behalf ... - 11:06 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek, could you help with FWD API to call the client api from the server side on behalf of the authenticated user th...
- 08:51 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
> Roger Borrello wrote:
> > Sergey Ivanovskiy wrote:
> > > #9709-460 looks like a configurat... - 07:02 AM Support #9709: Needed: Basic example of configuring separate client and server
- The only working schema can be that the web server that handled the login page creates authentication cookie on respo...
- 04:20 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > I would like to detail this part because the secure cookie was n...
01/29/2026
- 04:28 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> I would like to detail this part because the secure cookie was not set for the main ifram... - 04:10 PM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
> Sergey Ivanovskiy wrote:
> > #9709-460 looks like a configuration issue because client conn... - 03:20 PM Support #9709: Needed: Basic example of configuring separate client and server
- 9709b just rebased up to rev 16397.
- 03:16 PM Support #9709: Needed: Basic example of configuring separate client and server
- I would like to detail this part because the secure cookie was not set for the main iframe page for the reasons speci...
- 02:26 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Hynek Cihlar wrote:
> > The idea is the main (root) frame/page should refresh the token ... - 01:56 PM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > Hynek, you proposed to create session short-lived authentication... - 01:53 PM Support #9709 (WIP): Needed: Basic example of configuring separate client and server
- Branch @9709c@ was merged into trunk as rev. 16370 and archived. Changed status to WIP to complete the task.
- 01:11 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Hynek, you proposed to create session short-lived authentication/access web tokens that s... - 01:04 PM Support #9709: Needed: Basic example of configuring separate client and server
- OK. Preparing 9709c to merge.
9709 web token design to go farther
Hynek, you proposed to create session short... - 12:59 PM Support #9709 (Merge Pending): Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > Could 9709c be merged into the trunk? It passed tests and change... - 12:46 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> #9709-460 looks like a configuration issue because client connection is refused.
It is... - 12:33 PM Support #9709: Needed: Basic example of configuring separate client and server
- You could compare directory.xml of hotel_gui and cact if this is possible and check the bootstrap client configuratio...
- 12:27 PM Support #9709: Needed: Basic example of configuring separate client and server
- #9709-460 looks like a configuration issue because client connection is refused.
- 12:24 PM Support #9709: Needed: Basic example of configuring separate client and server
- Fixed erroneous code in rev 16372(9709c) and rev 16380(9709b).
- 12:09 PM Support #9709: Needed: Basic example of configuring separate client and server
- I found that the target code probably should be ...
- 11:01 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> You could run java program to test host name.
Excellent... now I'm confused more. The ... - 09:50 AM Support #9709: Needed: Basic example of configuring separate client and server
- I did not test @9709b_16379@ with @cact@ because no local setup at this moment but tested with the different large ap...
- 08:58 AM Support #9709: Needed: Basic example of configuring separate client and server
- Thanks for the clues, Sergey. One of the difficulties is the Docker image is very thin and without even the simplest ...
- 07:10 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger, did you try to configure @/etc/hosts@ file for each container?...
- 05:31 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger, what is the FWD version for your test environment? 9709b?
Are these instructions #9709-362 valid for hotel_gu... - 05:19 AM Support #9709: Needed: Basic example of configuring separate client and server
- Your network configuration resolves your host name as loop back address or fails to resolve this host name...
- 05:10 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger, this should be the network configuration issue. This exception ...
01/28/2026
- 06:55 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey, my customer's configuration is almost exactly the same as the hotel configuration, which is working. But the ...
- 11:42 AM Support #9709: Needed: Basic example of configuring separate client and server
- Good plan.
- 11:35 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Working on 9709b but it makes sense to merge 9709c first because Nginx gives the solid so... - 11:34 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Could 9709c be merged into the trunk? It passed tests and changes are safe.
Trunk is c... - 11:31 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Hynek, the js web client loads modules @p2j.js@, @p2j.screen.js@ and so on. Should these ... - 11:28 AM Support #9709: Needed: Basic example of configuring separate client and server
- Working on 9709b but it makes sense to merge 9709c first because Nginx gives the solid solution to this task (#9709-4...
- 11:01 AM Support #9709: Needed: Basic example of configuring separate client and server
- Could 9709c be merged into the trunk? It passed tests and changes are safe.
- 10:24 AM Support #9709: Needed: Basic example of configuring separate client and server
- Nginx has the simple configuration that is due to the customer developed this config. The new broker host ip address ...
- 10:00 AM Support #9709: Needed: Basic example of configuring separate client and server
- I updated #9709-449 to show environment settings.
- 09:55 AM Support #9709: Needed: Basic example of configuring separate client and server
- 9709c passed tests with nginx proxy server. Could this 9709c rev 16371 be merged into the trunk?
- 08:18 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek, the js web client loads modules @p2j.js@, @p2j.screen.js@ and so on. Should these modules be all private and c...
- 06:49 AM Support #9709: Needed: Basic example of configuring separate client and server
- For testing 9709c I need to use the web reverse proxy server. These settings for nginx used for the local setup of th...
- 06:26 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> @((WebClientBuilder) clientBuilder).getParams()@ returns @WebClientBuilderParameters@, bu... - 06:25 AM Support #9709: Needed: Basic example of configuring separate client and server
- @((WebClientBuilder) clientBuilder).getParams()@ returns @WebClientBuilderParameters@, but @clientBuilder.getParams()...
- 04:49 AM Support #9709 (Internal Test): Needed: Basic example of configuring separate client and server
- Code review 9709c.
The changes look fine. Just two minor points.
The cast @(WebClientBuilder) clientBuilder)@ i... - 04:21 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Created 9709c rev 16369. Please review these code again. I would like to merge this branc... - 03:34 AM Support #9709: Needed: Basic example of configuring separate client and server
- Created 9709c rev 16369. Please review these code again. I would like to merge this branch into the trunk.
- 02:37 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> This patch 9709c.patch can be merged because it was passed the review. The secure cookie ... - 02:32 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Hynek Cihlar wrote:
> > This was just an example. The malicious code could replace any o... - 02:30 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > You found that the current code uses the public function that ca... - 02:26 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> You found that the current code uses the public function that can be fixed. XSS is not an... - 02:23 AM Support #9709: Needed: Basic example of configuring separate client and server
- This path can be merged because it was passed the review. The secure cookie is STRICT and AuthHandler not changed.
- 02:08 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg, I would like to split 9709b to 9709c that was reviewed up to rev. 16361 (9709b) and merge this version into the...
- 02:04 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > What should be patched? The web socket object is also private.
...
01/27/2026
- 01:13 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> What should be patched? The web socket object is also private.
See the example:
<pre... - 12:58 PM Support #9709: Needed: Basic example of configuring separate client and server
- I think that XSS attacks cannot reach the target aim to steal the secret key in 9709b case.
- 12:56 PM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > Hynek Cihlar wrote:
> > > To make the process more secure it is... - 12:54 PM Support #9709: Needed: Basic example of configuring separate client and server
- An important point, the CSP measures should be configurable. They could prevent Lyra from extending the site DOM and ...
- 12:50 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Please specify the security requirements that should be satisfied to implement one-time w... - 12:32 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Greg, Hynek, please note that the security requirements that you are considering are not ... - 12:30 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Hynek Cihlar wrote:
> > To make the process more secure it is important to implement som... - 12:18 PM Support #9709: Needed: Basic example of configuring separate client and server
- Please specify the security requirements that should be satisfied to implement one-time web tokens and please explain...
- 12:09 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg, Hynek, please note that the security requirements that you are considering are not satisfied by the trunk!
If ... - 12:04 PM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> To make the process more secure it is important to implement some measures to prevent a potent... - 11:46 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> This value is not persistent in the directory. It is a temporary value delivered to the j... - 11:35 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> OK, then please provide a detailed description of your changes and why they are safe and secure.
... - 11:16 AM Support #9709: Needed: Basic example of configuring separate client and server
- This value is not persistent in the directory. It is a temporary value delivered to the java web client by WebClientS...
- 11:07 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Greg, I do not understand why you and Hynek decided that I implemented the described by t... - 10:40 AM Support #9709: Needed: Basic example of configuring separate client and server
- OK, then please provide a detailed description of your changes and why they are safe and secure.
- 10:32 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> > When the JS client is initialized, it received an unencrypted decryption key from Java client t... - 10:13 AM Support #9709: Needed: Basic example of configuring separate client and server
- > When the JS client is initialized, it received an unencrypted decryption key from Java client to decrypt the api to...
- 09:53 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > I still do not understand why we should use @postMessage@, the w... - 09:52 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> > Static resources (img, css, js) would either be public (they are public anyway), or fet... - 09:31 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> I still do not understand why we should use @postMessage@, the web tokens can be generate... - 09:25 AM Support #9709: Needed: Basic example of configuring separate client and server
- > Static resources (img, css, js) would either be public (they are public anyway), or fetched via authenticated XHR/f...
- 09:22 AM Support #9709: Needed: Basic example of configuring separate client and server
- Yes, 9709b rev 16379 and the latest rebase trunk rev 16353.
- 09:11 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Roger Borrello wrote:
> > Sergey, am I able to test with the very latest revision of 970... - 08:58 AM Support #9709: Needed: Basic example of configuring separate client and server
- I still do not understand why we should use @postMessage@, the web tokens can be generated as it is implemented in @9...
- 08:33 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Please revisit #9709-289.
Yes, thanks. This is the @SameSite@ policy on the cookie in ... - 07:48 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > The only web authentication method that is available for the cus... - 07:47 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > Hynek Cihlar wrote:
> > > Code review 9709b.
> > >
> > > I h... - 07:44 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> The only web authentication method that is available for the customer that uses the dynam... - 07:40 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Hynek Cihlar wrote:
> > Code review 9709b.
> >
> > I have some comments to address in... - 06:48 AM Support #9709: Needed: Basic example of configuring separate client and server
- The only web authentication method that is available for the customer that uses the dynamic web pages is the secure c...
- 06:07 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Code review 9709b.
>
> I have some comments to address in the changes, but my biggest conce... - 05:50 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek Cihlar wrote:
> Code review 9709b.
>
> I have some comments to address in the changes, but my biggest conce... - 04:53 AM Support #9709: Needed: Basic example of configuring separate client and server
- Code review 9709b.
I have some comments to address in the changes, but my biggest concern is the api token managem... - 04:14 AM Support #9709: Needed: Basic example of configuring separate client and server
- I have not fixed yet the test keyboard handler and not tested upload files handler. Thus in these parts can be changes.
- 03:48 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
> Sergey, am I able to test with the very latest revision of 9709b? Or do I need to stay with ...
01/26/2026
- 05:57 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey, am I able to test with the very latest revision of 9709b? Or do I need to stay with 16336?
Greg, I have a... - 02:51 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> > No port mapping, no NAT, and each container has its own IP and DNS identity. This is what you a... - 02:20 PM Support #9709: Needed: Basic example of configuring separate client and server
- Committed rev 16378 (9709b) fixed and tested @MSG_ALLOCATE_NEW_WEB_TOKEN@.
- 10:46 AM Support #9709: Needed: Basic example of configuring separate client and server
- > No port mapping, no NAT, and each container has its own IP and DNS identity. This is what you are talking about, co...
- 08:35 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> To be clear: these are the things that must be visible externally:
>
> * FWD server's IP addre... - 05:16 AM Support #9709: Needed: Basic example of configuring separate client and server
- Committed rev 16375 (9709b). This is what is possible to do with the current cross-site web client page and dynamic h...
01/23/2026
- 11:17 AM Support #9709: Needed: Basic example of configuring separate client and server
- I also tried to set response headers like these Access-Control-Allow-Credentials and Access-Control-Allow-Origin with...
- 09:35 AM Support #9709 (Review): Needed: Basic example of configuring separate client and server
- 09:30 AM Support #9709: Needed: Basic example of configuring separate client and server
- @localStorage@ and @sessionStorage@ with the authentication header is not recommended approach but using secret key w...
- 09:20 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg, could 9709b be reviewed at this stage because during the review these problems could be solved.
- 09:12 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> What do we need to do to finish this work and help get this into trunk sometime next week?
It ne... - 09:03 AM Support #9709: Needed: Basic example of configuring separate client and server
- What do we need to do to finish this work and help get this into trunk sometime next week?
- 08:10 AM Support #9709: Needed: Basic example of configuring separate client and server
- Committed revision 16374(9709b) improved the web token validation logic in order to generate web token on the java we...
- 07:44 AM Support #9709: Needed: Basic example of configuring separate client and server
- To be clear: these are the things that must be visible externally:
* FWD server's IP address and Jetty port
* FWD... - 07:41 AM Support #9709: Needed: Basic example of configuring separate client and server
- As stated previously, we must not base our networking on the concept that the containers will be accessible from the ...
- 04:04 AM Support #9709: Needed: Basic example of configuring separate client and server
- > The server is visible to the broker (at least the first one) via port 3333 when I use the host name, even when runn...
01/22/2026
- 05:25 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> In production, orchestration tools like Kubernetes will be used in preference to Docker Compose. ... - 05:22 PM Support #9709: Needed: Basic example of configuring separate client and server
- This committed revision 16373 (9709b) was tested with one of the customers large application, found issues related to...
- 11:58 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Why it cannot use the main web server certificate?
It will work, but we will need to doc... - 11:53 AM Support #9709: Needed: Basic example of configuring separate client and server
- Why it cannot use the main web server certificate?
- 11:51 AM Support #9709: Needed: Basic example of configuring separate client and server
- Something else to consider: if the iframe is served directly by the broker host, then each broker will require its ow...
- 10:56 AM Support #9709: Needed: Basic example of configuring separate client and server
- @bash@ please.
- 10:54 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> > Prepare the directory
> >
> > [...]
>
> Do we really need to use compose to prepare the di... - 10:35 AM Support #9709: Needed: Basic example of configuring separate client and server
- Constantin: I agree that reverse proxy will be commonly used and often chosen. But I don't want to require reverse p...
- 10:33 AM Support #9709: Needed: Basic example of configuring separate client and server
- > Prepare the directory
>
> ... - 10:32 AM Support #9709: Needed: Basic example of configuring separate client and server
- > > Why do you use https://localhost:7443/? You should use the server address and please check these conditions, all ...
- 10:19 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> I will check this later. The only idea is to use dedicatedMode = true. It should generate... - 09:50 AM Support #9709: Needed: Basic example of configuring separate client and server
- Constantin Asofiei wrote:
> Sergey Ivanovskiy wrote:
> > Constantin, #9709-277 the second option can be used.
> I ... - 09:38 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Constantin, #9709-277 the second option can be used.
I understand, but this is not just ... - 09:35 AM Support #9709: Needed: Basic example of configuring separate client and server
- Constantin, #9709-277 the second option can be used.
- 09:18 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey, please create a diagram how the infrastructure will look when deploying FWD with brokers.
Greg: I understa... - 09:10 AM Support #9709: Needed: Basic example of configuring separate client and server
- Constantin Asofiei wrote:
> From #10809-50:
> Sergey Ivanovskiy wrote:
> > Do you have ideas how to overcome usage... - 09:00 AM Support #9709: Needed: Basic example of configuring separate client and server
- From #10809-50:
Sergey Ivanovskiy wrote:
> Do you have ideas how to overcome usages of LAX cookies with cross-site ... - 05:17 AM Support #9709 (WIP): Needed: Basic example of configuring separate client and server
- 03:35 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg, Hynek, from the Single_Sign_On documentation ...
- 02:14 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
> Sergey, revision 421 of Hotel GUI allows you to configure the docker compose very easily. Th... - 02:09 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger, I have no idea, the accessibility conditions should be satisfied #9709-358 in order that the broker configurat...
01/21/2026
- 06:45 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey, revision 421 of Hotel GUI allows you to configure the docker compose very easily. The steps would be:
* Conv... - 04:28 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Why do you use https://localhost:7443/? You should use the server address and please chec... - 12:35 PM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
> Sergey Ivanovskiy wrote:
> > Roger, I am not aware of your environment and the correspondin... - 12:18 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Roger, I am not aware of your environment and the corresponding setup but there are the f... - 03:41 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger, I am not aware of your environment and the corresponding setup but there are the following conditions that sho...
- 07:37 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey, in my docker compose configuration, I have 3 containers, the DB (hostname=hoteldb), the server (hostname=hote...
01/20/2026
- 12:08 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Hynek, could you help with spreadsheet testcase sample? I need to test how the spreadshee... - 08:45 AM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek, could you help with spreadsheet testcase sample? I need to test how the spreadsheet resources are loaded with ...
01/19/2026
- 06:53 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> Container-related details should be #7275 or if you are trying to keep the details non-private, w... - 05:56 PM Support #9709: Needed: Basic example of configuring separate client and server
- Committed revision 16355 (9709b). This is incomplete commit. Testing and fixing found issues related to query paramet...
01/16/2026
- 06:35 PM Support #9709: Needed: Basic example of configuring separate client and server
- Committed rev 16353 (9709b) implemented the secure tokens (#9709-349). (@AuthHandler@ decrypts tokens generated by @p...
- 11:21 AM Support #9709: Needed: Basic example of configuring separate client and server
- Code Review Task Branch 9709b Revisions 16351 and 16352
The logging changes are good. - 05:19 AM Support #9709: Needed: Basic example of configuring separate client and server
- I am implementing the following idea. The web client creates the @AES@ cryptographic key and delivers this key to @Au...
01/15/2026
- 05:53 PM Support #9709: Needed: Basic example of configuring separate client and server
- Container-related details should be #7275 or if you are trying to keep the details non-private, we can create another...
- 05:44 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg, is this the proper place for discussion of the container configuration itself? I have the exact same docker-com...
- 12:52 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg, I just follow #9709-283, #9709-284 and already did some changes in rev 16350 (9709b). This task needs to be com...
- 12:31 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> I think we've spent quite a bit of time on this and I'm not sure if we should continue this effor... - 12:28 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> I need to transmit secure tokens as response headers but it is possible only to send them... - 12:22 PM Support #9709: Needed: Basic example of configuring separate client and server
- I need to transmit secure tokens as response headers but it is possible only to send them as template page parameters.
- 12:17 PM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek, Constantin, please review the current rev 9709b. #9709-336 I have technical difficulties with the current impl...
01/14/2026
- 05:59 PM Support #9709: Needed: Basic example of configuring separate client and server
- I believe I found the appropriate network setup for our GCD firewall that should allow the docker-compose network to ...
- 03:30 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> Sergey Ivanovskiy wrote:
> > Roger, you can investigate the code of @BrokerManager.schedule@ and... - 02:57 PM Support #9709: Needed: Basic example of configuring separate client and server
- There is this experimental browsers API https://developer.mozilla.org/en-US/docs/Web/API/Private_State_Token_API that...
- 02:47 PM Support #9709: Needed: Basic example of configuring separate client and server
- Hynek, please help to gather all api that requires security token. We need to provide security token to get an access...
- 11:19 AM Support #9709: Needed: Basic example of configuring separate client and server
- Now that the certificate was accepted, the second time I tried to get in, we are successful:
!9709_2nd_time_in_works... - 10:51 AM Support #9709: Needed: Basic example of configuring separate client and server
- So without the proxy configured, we get a valid URL in our error:...
- 10:45 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
> Roger Borrello wrote:
> directory. This didn't make any difference, because it turns out it... - 10:05 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg, I meant that the reverse proxy server has its own configuration. The broker client and local web client looks s...
- 09:59 AM Support #9709: Needed: Basic example of configuring separate client and server
- Some customers will not use reverse proxy but will use the complex containers. So we must support complex containers...
- 09:26 AM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> Sergey Ivanovskiy wrote:
> > Roger, I do not understand why you were using proxy. In our broker ... - 06:33 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Roger, you can investigate the code of @BrokerManager.schedule@ and add changes here to s... - 06:32 AM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Roger, I do not understand why you were using proxy. In our broker configuration we do no... - 03:40 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger, I do not understand why you were using proxy. In our broker configuration we do not use the proxy server.
- 07:14 PM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
directory. This didn't make any difference, because it turns out it was the same issue I disco... - 07:05 PM Support #9709: Needed: Basic example of configuring separate client and server
- I was trying to work with a docker-compose setup and was not able the browser to the server. In this configuration, w...
01/13/2026
- 06:06 PM Support #9709: Needed: Basic example of configuring separate client and server
- I found that I did not test @LAX@ policy and committed into 9709b rev 16349 but cookie was blocked due to the LAX coo...
- 03:29 PM Support #9709: Needed: Basic example of configuring separate client and server
- Sergey Ivanovskiy wrote:
> Roger, you can investigate the code of @BrokerManager.schedule@ and add changes here to s... - 02:32 PM Support #9709: Needed: Basic example of configuring separate client and server
- Roger, you can investigate the code of @BrokerManager.schedule@ and add changes here to see which one is selected for...
- 02:30 PM Support #9709: Needed: Basic example of configuring separate client and server
- Actually, I disconnected one, came in again, and *broker1* was used... Not sure I know the algorithm, but I was just ...
- 02:27 PM Support #9709: Needed: Basic example of configuring separate client and server
- With a second broker configured, I connected from a second laptop on my network. It still went through the same broke...
- 02:23 PM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
> Greg Shah wrote:
> > Yes, but especially the [[p2j:Remote Launchers]]
>
> Updated the *c...
01/08/2026
- 05:38 PM Support #9709: Needed: Basic example of configuring separate client and server
- Greg Shah wrote:
> Yes, but especially the [[p2j:Remote Launchers]]
Updated the *client.xml* section. I was looki... - 10:55 AM Support #9709: Needed: Basic example of configuring separate client and server
- Roger Borrello wrote:
> Greg Shah wrote:
> > Roger: Based on your trials and tribulations with this, I think our do...
Also available in: Atom