FWD » Documentation

03/25/2026

06:35 PM Support #9709: Needed: Basic example of configuring separate client and server

Committed revision 16491 (9709d) fixed found issues with @openMimeResource@ in new window. Tomorrow I am planning to ... Sergey Ivanovskiy

12:52 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Another point is that the broker client debug option is not given in this bootstrap confi... Roger Borrello

12:08 PM Support #9709: Needed: Basic example of configuring separate client and server

Another point is that the broker client debug option is not given in this bootstrap configuration but they are provid... Sergey Ivanovskiy

12:05 PM Support #9709: Needed: Basic example of configuring separate client and server

Roger Borrello wrote:
> Sergey Ivanovskiy wrote:
> > With 9709e the broker client configuration has these changes
... Sergey Ivanovskiy

12:02 PM Support #9709: Needed: Basic example of configuring separate client and server

Roger, the idea of these changes was to use the same relative paths as the same values have in the @directory.xml@. I... Sergey Ivanovskiy

10:54 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> With 9709e the broker client configuration has these changes... Roger Borrello

08:14 AM Support #9709: Needed: Basic example of configuring separate client and server

Hynek Cihlar wrote:
> > > Also we certainly don't want to duplicate the auth mechanisms, CHIPS alongside JWT.
> > I... Sergey Ivanovskiy

05:29 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Hynek Cihlar wrote:
> > Sergey Ivanovskiy wrote:
> > > @9709d@ cannot. Embedded reports... Hynek Cihlar

04:06 AM Support #9709: Needed: Basic example of configuring separate client and server

Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > @9709d@ cannot. Embedded reports that should be opened in new ta... Sergey Ivanovskiy

03:57 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> @9709d@ cannot. Embedded reports that should be opened in new tabs are not authorized bec... Hynek Cihlar

12:38 AM Support #9709: Needed: Basic example of configuring separate client and server

In respect to
>9709d cannot. Embedded reports that should be opened in new tabs are not authorized because the secur... Sergey Ivanovskiy

03/24/2026

06:28 PM Support #9709: Needed: Basic example of configuring separate client and server

With 9709e the broker client configuration has these changes... Sergey Ivanovskiy

06:18 PM Support #9709: Needed: Basic example of configuring separate client and server

I tested @9709e@ and @9709d@.
@9709e@ can be merged into the trunk. Please complete the review.
@9709d@ cannot.... Sergey Ivanovskiy

04:55 PM Support #9709: Needed: Basic example of configuring separate client and server

Thank you! The broker client was connected. Now I see what happened that the @client.sh@ had been updated. Sergey Ivanovskiy

04:51 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> @export TERM=xterm;./client.sh -cbroker1_client.xml@ was used in this test.
Make sure ... Roger Borrello

04:46 PM Support #9709: Needed: Basic example of configuring separate client and server

This is the client log. The initial connection was to insecure port and guest user: bogus. How should this logic flow? Sergey Ivanovskiy

04:33 PM Support #9709: Needed: Basic example of configuring separate client and server

@export TERM=xterm;./client.sh -cbroker1_client.xml@ was used in this test. Sergey Ivanovskiy

04:29 PM Support #9709: Needed: Basic example of configuring separate client and server

I need to discuss the following logic at @BrokerManager.registerBroker@. While preparing @Hotel_Gui@ environment I go... Sergey Ivanovskiy

05:48 AM Support #9709: Needed: Basic example of configuring separate client and server

OK, I will use web clients spawned on VM that accessed by the vm ip address. Sergey Ivanovskiy

05:39 AM Support #9709: Needed: Basic example of configuring separate client and server

Hynek Cihlar wrote:
> Sergey Ivanovskiy wrote:
> > Committed revision 16488 (9709d) fixed incorrect prefix. I can t... Hynek Cihlar

05:33 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Committed revision 16488 (9709d) fixed incorrect prefix. I can test only the existed conf... Hynek Cihlar

05:27 AM Support #9709: Needed: Basic example of configuring separate client and server

Hynek Cihlar wrote:
> Code review 9709d.
>
> *Cookie name prefix (`AuthHandler.java:194` in diff)*: The cookie na... Sergey Ivanovskiy

05:26 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> > Greg, please inspect @ConfigItem@ for defined bootstrap options. This class should define all c... Sergey Ivanovskiy

03:36 AM Support #9709: Needed: Basic example of configuring separate client and server

Yes, I tested these cases although the prefix that you found was not correct. I will retest the changes with the corr... Sergey Ivanovskiy

03:28 AM Support #9709: Needed: Basic example of configuring separate client and server

Code review 9709d.
*Cookie name prefix (`AuthHandler.java:194` in diff)*: The cookie name is changed to @"--Host-A... Hynek Cihlar

03/23/2026

12:39 PM Support #9709: Needed: Basic example of configuring separate client and server

> What is about 9709d where cross-site secure cookies with partition attribute CHIPS (Cookies Having Independent Part... Greg Shah

11:15 AM Support #9709: Needed: Basic example of configuring separate client and server

9709d is rebased up to rev 16487. Sergey Ivanovskiy

11:12 AM Support #9709: Needed: Basic example of configuring separate client and server

Yes, I will clean the code in 9709e.
What is about 9709d where cross-site secure cookies with partition attribute ... Sergey Ivanovskiy

09:41 AM Support #9709: Needed: Basic example of configuring separate client and server

> Greg, please inspect @ConfigItem@ for defined bootstrap options. This class should define all configuration paramet... Greg Shah

04:52 AM Support #9709: Needed: Basic example of configuring separate client and server

I found that we have the following settings... Sergey Ivanovskiy

03/21/2026

03:01 AM Support #9709: Needed: Basic example of configuring separate client and server

Another idea is to use @clientConfig@ and @webClient@ as categories of bootstrap options. Following this way gives
... Sergey Ivanovskiy

03/20/2026

10:06 AM Support #9709: Needed: Basic example of configuring separate client and server

We have @webClient@ and @clientConfig@ nodes that can be under these parents described by the following algorithm (ja... Sergey Ivanovskiy

02:34 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg, please inspect @ConfigItem@ for defined bootstrap options. This class should define all configuration parameter... Sergey Ivanovskiy

03/18/2026

10:37 AM Support #9709: Needed: Basic example of configuring separate client and server

In the directory, the broker @clientConfig@ would be inside what parent section? It would not be @remote@, right?
... Greg Shah

10:30 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg, do you propose to replace these ones to @clientConfig@ too?... Sergey Ivanovskiy

08:44 AM Support #9709: Needed: Basic example of configuring separate client and server

Right. This is where I think that @java@ does not intuitively match the idea of our @clientConfig@. Greg Shah

08:02 AM Support #9709: Needed: Basic example of configuring separate client and server

Yes, we have equivalent settings for local web clients given via these directory settings:... Sergey Ivanovskiy

07:58 AM Support #9709: Needed: Basic example of configuring separate client and server

> I agree that @remote@ is counterintuitive, but it has been used historically for the broker client configuration fi... Greg Shah

07:54 AM Support #9709: Needed: Basic example of configuring separate client and server

I agree that @remote@ is counterintuitive, but it has been used historically for the broker client configuration file... Sergey Ivanovskiy

07:42 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Please review rev 16471 and rev 16472 (9709e) that use intuitive client config settings @... Greg Shah

03/17/2026

01:24 PM Support #9709: Needed: Basic example of configuring separate client and server

Found issue and cleaned the code. Please review the committed revision 16473 (9709e). Sergey Ivanovskiy

12:08 PM Support #9709: Needed: Basic example of configuring separate client and server

Please review rev 16471 and rev 16472 (9709e) that use intuitive client config settings @remote:java:minAgentPort@ an... Sergey Ivanovskiy

11:15 AM Support #9709: Needed: Basic example of configuring separate client and server

> Can we add new settings to support jmx and java debugger agents?
Yes, but we should map these into bootstrap cfg... Greg Shah

02:14 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg, for debugging broker-spawned web clients we need to deliver these parameters @minAgentPort@ and @maxAgentPort@ ... Sergey Ivanovskiy

03/16/2026

01:28 PM Support #9709: Needed: Basic example of configuring separate client and server

Code Review Task branch 9709e Revisions 16469 and 16470
The changes look good. Greg Shah

03/15/2026

03:20 PM Support #9709: Needed: Basic example of configuring separate client and server

Created 9709e in order to provide the ports range for each broker host. Committed revision 16470.(9709e). Please revi... Sergey Ivanovskiy

03/12/2026

05:23 AM Support #9709: Needed: Basic example of configuring separate client and server

Rebased to revision 16472 (9709d). Sergey Ivanovskiy

03/09/2026

02:50 AM Support #9709: Needed: Basic example of configuring separate client and server

Yes, please review rev 16463 9709d with partitioned cookies. Sergey Ivanovskiy

02:26 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey, is this ready for a final review? I ask because the issue is at 90% done. Hynek Cihlar

03/02/2026

11:42 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> 22.04 is almost 4 years old. We should not use it.
>
> 24.04 is almost 2 years old. It is st... Roger Borrello

07:46 AM Support #9709: Needed: Basic example of configuring separate client and server

22.04 is almost 4 years old. We should not use it.
24.04 is almost 2 years old. It is stable and works well. Th... Greg Shah

06:32 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> So, I need to migrate from Ubuntu 22.04 -> 24.04.
I googled this issue and got
*The ... Sergey Ivanovskiy

03/01/2026

04:25 PM Support #9709 (Review): Needed: Basic example of configuring separate client and server

9709d is ready for the review rev 16452. Sergey Ivanovskiy

04:21 PM Support #9709: Needed: Basic example of configuring separate client and server

So, I need to migrate from Ubuntu 22.04 -> 24.04. Sergey Ivanovskiy

09:10 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Roger, can I use @tools/docker@ scripts if I am using Ubuntu 22.04 host? Where can I find... Roger Borrello

08:52 AM Support #9709: Needed: Basic example of configuring separate client and server

Should I use #9709-362? Sergey Ivanovskiy

08:50 AM Support #9709: Needed: Basic example of configuring separate client and server

Roger, can I use @tools/docker@ scripts if I am using Ubuntu 22.04 host? Where can I find docs for Hotel_Gui docker s... Sergey Ivanovskiy

02/27/2026

06:41 AM Support #9709: Needed: Basic example of configuring separate client and server

Roger Borrello wrote:
> Sergey, I am going to check in some tools in the @./tools/docker@ directory of *9709d*. I wa... Sergey Ivanovskiy

02/26/2026

06:10 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey, I am going to check in some tools in the @./tools/docker@ directory of *9709d*. I was writing up instructions... Roger Borrello

03:59 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Roger, is spawner install script updated accordingly?
The bash @install_spawner.sh@ ca... Roger Borrello

03:46 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> I updated rev 16449 (9709d) but I do not know how to setup spawner. I used to run
> [..... Sergey Ivanovskiy

03:38 PM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> As I said, I don't want to implement the 9709b approach. I'm just trying to get it documented an... Sergey Ivanovskiy

03:34 PM Support #9709: Needed: Basic example of configuring separate client and server

As I said, I don't want to implement the 9709b approach. I'm just trying to get it documented and to understand it.
... Greg Shah

03:33 PM Support #9709: Needed: Basic example of configuring separate client and server

I updated rev 16449 (9709d) but I do not know how to setup spawner. I used to run ... Sergey Ivanovskiy

03:14 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Yes, doing it right now.
Thank you. I also placed the branch in @/opt/fwd/9709d@ for c... Roger Borrello

03:00 PM Support #9709: Needed: Basic example of configuring separate client and server

Yes, doing it right now. Sergey Ivanovskiy

02:56 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey, is there any chance you could rebase 9709d to the latest trunk? Roger Borrello

02:54 PM Support #9709: Needed: Basic example of configuring separate client and server

My proposals for 9709b were to use the symmetric cryptography to store the private key per session and to preallocate... Sergey Ivanovskiy

02:48 PM Support #9709: Needed: Basic example of configuring separate client and server

Hynek proposed #9709-586 tokens that expired after the specified time. Please review the proposals. The current web c... Sergey Ivanovskiy

02:32 PM Support #9709: Needed: Basic example of configuring separate client and server

The jscript web client is loaded by the java web client, first resources and then jscript code is running.
The jscri... Sergey Ivanovskiy

12:12 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> The token can have an expiration date or can be one time token so each new request needs ... Greg Shah

10:37 AM Support #9709: Needed: Basic example of configuring separate client and server

At this moment I have this very raw version of @9709b@ (rev 16474) with one time tokens but the scenario in which the... Sergey Ivanovskiy

10:21 AM Support #9709: Needed: Basic example of configuring separate client and server

The token can have an expiration date or can be one time token so each new request needs to get new one. My initial p... Sergey Ivanovskiy

10:13 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> After discussion with Hynek we agreed that we need to refresh the token used for the init... Greg Shah

10:08 AM Support #9709: Needed: Basic example of configuring separate client and server

After discussion with Hynek we agreed that we need to refresh the token used for the initial web socket connection. T... Sergey Ivanovskiy

08:15 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Greg, I am sorry for confusions here but we should discuss all these parts from the begin... Greg Shah

08:03 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg, I am sorry for confusions here but we should discuss all these parts from the beginning because I would propose... Sergey Ivanovskiy

07:56 AM Support #9709: Needed: Basic example of configuring separate client and server

I would like to express the opposite opinion that CHIPs should fit the current design. Sergey Ivanovskiy

07:53 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> > My worry here is that this is very over-complicated and has serious resource implicatio... Greg Shah

07:44 AM Support #9709: Needed: Basic example of configuring separate client and server

> My worry here is that this is very over-complicated and has serious resource implications. I prefer to avoid this ... Sergey Ivanovskiy

07:38 AM Support #9709: Needed: Basic example of configuring separate client and server

> The branch @9709b@ must use authentication tokens instead of http secure cookies to authenticate requests from the ... Greg Shah

03:31 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg, agree with you that I did not express the idea clearly. I am working on @9709b@ and @9709d@ completely differen... Sergey Ivanovskiy

02/25/2026

02:25 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Greg Shah wrote:
> > We aren't going to have an additional thread for each session. Tha... Greg Shah

01:17 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Greg Shah wrote:
> > We aren't going to have an additional thread for each session. Tha... Hynek Cihlar

11:57 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> We aren't going to have an additional thread for each session. That doesn't scale.
To get an ac... Sergey Ivanovskiy

11:50 AM Support #9709: Needed: Basic example of configuring separate client and server

We aren't going to have an additional thread for each session. That doesn't scale.
I don't understand what proces... Greg Shah

09:00 AM Support #9709: Needed: Basic example of configuring separate client and server

I see that the similar context switch is implemented by @LegacyWebSecurityManager@. I can use @AssociatedThread@ to s... Sergey Ivanovskiy

02/24/2026

02:15 AM Support #9709: Needed: Basic example of configuring separate client and server

Stanislav, could we rename and split this logic @SecurityManager.getUserId()@ into @SecurityManager.getUserAndStorage... Sergey Ivanovskiy