FWD » Documentation

05/15/2026

09:07 AM Support #9709: Needed: Basic example of configuring separate client and server

Due to #11401 I should include a hot patch into @9709e@ that removes @deleteAuthCookie(request, response);@ logic fro... Sergey Ivanovskiy

09:03 AM Support #9709: Needed: Basic example of configuring separate client and server

Hynek Cihlar wrote:
> Sergey, when you do review for yourself please don't post it here. It adds a lot of noise and ... Sergey Ivanovskiy

06:22 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey, when you do review for yourself please don't post it here. It adds a lot of noise and is useless for the othe... Hynek Cihlar

05/14/2026

09:30 AM Support #9709: Needed: Basic example of configuring separate client and server

I got this result that can be considered for the review. These functional MAJORS are from 9709e changes that we discu... Sergey Ivanovskiy

07:49 AM Support #9709: Needed: Basic example of configuring separate client and server

h1. FWD Code Review — Branch 9709e (revs 16563..16579, round 3)
h2. Previously fixed (verified)
* *[MAJOR]* _fu... Sergey Ivanovskiy

06:53 AM Support #9709: Needed: Basic example of configuring separate client and server

h1. FWD Code Review — Branch 9709e (revs 16563..16578, round 2)
h2. Previously fixed (verified)
* *[MAJOR]* _fu... Sergey Ivanovskiy

05:57 AM Support #9709: Needed: Basic example of configuring separate client and server

h1. FWD Code Review — Branch 9709e (revs 16563..16576)
h2. Findings
* *[MAJOR]* _functional_ @WebClientsManager... Sergey Ivanovskiy

04:57 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> I rebased 9709e and committed ClientsToPortsGenerator patch rev 16576 (9709e) to resolve ... Sergey Ivanovskiy

04:45 AM Support #9709: Needed: Basic example of configuring separate client and server

These settings are not supported it is probably came from 9709a branch that are discussed with you but they are not a... Sergey Ivanovskiy

05/13/2026

05:10 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> >However, I should only need to contact cact_server directly from my laptop, because the ... Roger Borrello

03:18 PM Support #9709: Needed: Basic example of configuring separate client and server

I rebased 9709e and committed ClientsToPortsGenerator patch rev 16576 (9709e) to resolve client host number part of t... Sergey Ivanovskiy

01:55 PM Support #9709: Needed: Basic example of configuring separate client and server

>However, I should only need to contact cact_server directly from my laptop, because the server and brokers are conne... Sergey Ivanovskiy

01:51 PM Support #9709: Needed: Basic example of configuring separate client and server

Please correct the issue that I tried to describe that the server container on vm is accessed by the browser running ... Sergey Ivanovskiy

01:15 PM Support #9709: Needed: Basic example of configuring separate client and server

The *TestHost* @java -jar /opt/counteract/etc/testhost.jar cact_broker1@ on the cact_server shows:... Roger Borrello

01:14 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> This message is confusing. cact_broker1 is a host that runs @BrokerCore@ client. cact_ser... Roger Borrello

01:06 PM Support #9709: Needed: Basic example of configuring separate client and server

This message is confusing. cact_broker1 is a host that runs @BrokerCore@ client. cact_server is the application serve... Sergey Ivanovskiy

01:02 PM Support #9709: Needed: Basic example of configuring separate client and server

Roger, what is the code that produces this "cact_broker1’s server IP address could not be found."? Sergey Ivanovskiy

12:07 PM Support #9709: Needed: Basic example of configuring separate client and server

I did not test your configuration and tested the configuration that should prove that the web client spawned by the b... Sergey Ivanovskiy

10:57 AM Support #9709: Needed: Basic example of configuring separate client and server

I updated the @broker1_client.xml@, but upon connection I get:... Roger Borrello

10:00 AM Support #9709: Needed: Basic example of configuring separate client and server

Yes, two sections can be merged, xml configuration looks correct. Sergey Ivanovskiy

09:47 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Roger, what version do you use for this test? If you are using the trunk version, then @r... Roger Borrello

01:12 AM Support #9709: Needed: Basic example of configuring separate client and server

#9709-113 refers to the trunk code but 9709e gets rid of @remote@ nodes. Sergey Ivanovskiy

01:08 AM Support #9709: Needed: Basic example of configuring separate client and server

Roger, what version do you use for this test? If you are using the trunk version, then @remote@ node is still present... Sergey Ivanovskiy

09:23 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey, my @client_broker1.xml@ seems to be OK...... Roger Borrello

05/12/2026

04:46 PM Support #9709: Needed: Basic example of configuring separate client and server

I added *nginx* to the mix so I could more closely match the customer. My server is logging:... Roger Borrello

05/08/2026

03:43 AM Support #9709: Needed: Basic example of configuring separate client and server

I rebased 9709e up to rev 16571 to get new updates. Sergey Ivanovskiy

05/07/2026

09:27 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Could you run only VM with one broker client container while the server and the database ... Roger Borrello

12:02 AM Support #9709: Needed: Basic example of configuring separate client and server

Could you run only VM with one broker client container while the server and the database containers are hosted on you... Sergey Ivanovskiy

11:54 PM Support #9709: Needed: Basic example of configuring separate client and server

Roger, your client log messages look normal. My last messages for the locally installed application are similar, exce... Sergey Ivanovskiy

09:56 PM Support #9709: Needed: Basic example of configuring separate client and server

Things are much better, although I really need to elongate some timeouts because in this configuration (the VM hostin... Roger Borrello

05/06/2026

05:13 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Roger, I will be online within two hours.
Thanks... I am rebuilding on the latest 9709... Roger Borrello

05:11 PM Support #9709: Needed: Basic example of configuring separate client and server

Roger, I will be online within two hours. Sergey Ivanovskiy

05:02 PM Support #9709: Needed: Basic example of configuring separate client and server

!ScreenshotCookiesToCheckVersion.png! Sergey Ivanovskiy

03:33 PM Support #9709: Needed: Basic example of configuring separate client and server

OK, I will attach to your meeting room within 5 minutes. I should watch the video first. Sergey Ivanovskiy

03:12 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Did you try https://cactbrk1:7449/index.html?token=a5df4a81146dcec130e8b9b28326ea8e in ne... Roger Borrello

02:17 PM Support #9709: Needed: Basic example of configuring separate client and server

We can schedule the Google meeting later this day to find root cause of this issue. Sergey Ivanovskiy

02:15 PM Support #9709: Needed: Basic example of configuring separate client and server

What is the log of the broker client that should be run on cactbrk1? Do you have the server log that this broker is r... Sergey Ivanovskiy

02:07 PM Support #9709: Needed: Basic example of configuring separate client and server

Please check using Chrome Web Developer Tools the root cause of 401. For doing this please check cookie, request, res... Sergey Ivanovskiy

02:01 PM Support #9709: Needed: Basic example of configuring separate client and server

Did you try https://cactbrk1:7449/index.html?token=a5df4a81146dcec130e8b9b28326ea8e in new tab? Sergey Ivanovskiy

01:56 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Please post the jconsole, 401 code means unauthorized access to the resources.... Roger Borrello

01:23 PM Support #9709: Needed: Basic example of configuring separate client and server

Please post the jconsole, 401 code means unauthorized access to the resources. Sergey Ivanovskiy

01:18 PM Support #9709: Needed: Basic example of configuring separate client and server

Do you use 9709e? Sergey Ivanovskiy

01:13 PM Support #9709: Needed: Basic example of configuring separate client and server

Everytime I return to broker, there's a big regroup... I finally am getting connected again... almost. The configurat... Roger Borrello

01:55 AM Support #9709: Needed: Basic example of configuring separate client and server

This is the client settings related to the debug agent ports if the remote debug is needed:... Sergey Ivanovskiy

01:48 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Roger, please look at your directory settings (#9709-889) and check the access to your ce... Roger Borrello

01:28 AM Support #9709: Needed: Basic example of configuring separate client and server

Roger Borrello wrote:
> Should my configuration work any better (or worse) with *trunk_16543*?
What do you mean? 97... Sergey Ivanovskiy

12:55 AM Support #9709: Needed: Basic example of configuring separate client and server

Roger, please look at your directory settings (#9709-889) and check the access to your certificates in the client xml... Sergey Ivanovskiy

05/05/2026

05:55 PM Support #9709: Needed: Basic example of configuring separate client and server

Roger Borrello wrote:
> Should my configuration work any better (or worse) with *trunk_16543*?
I'm trying the exa... Roger Borrello

05:46 PM Support #9709: Needed: Basic example of configuring separate client and server

Should my configuration work any better (or worse) with *trunk_16543*? Roger Borrello

03:16 PM Support #9709: Needed: Basic example of configuring separate client and server

I am built with *9709e_16545* and I have updated my broker client file and directory.xml, and I am getting this error... Roger Borrello

01:09 PM Support #9709: Needed: Basic example of configuring separate client and server

9709b should be moved to the dead branches because it was never merged into the trunk and should not. Sergey Ivanovskiy

01:05 PM Support #9709: Needed: Basic example of configuring separate client and server

This file shows the changes needed to work with 9709e and ... Sergey Ivanovskiy

12:57 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Sorry for my late response, I should rebuild FWD certificates and tested the broker setup... Roger Borrello

05/04/2026

06:02 PM Support #9709: Needed: Basic example of configuring separate client and server

See "Skills":https://platform.claude.com/docs/en/agents-and-tools/agent-skills/overview and [[internal-systems:Agent ... Greg Shah

05:11 PM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> This will need to migrate into a Skill.
What's that? (Besides something I don't have)
> Ple... Roger Borrello

03:45 PM Support #9709: Needed: Basic example of configuring separate client and server

Very nice, Rog! It is an improvement over the older version from Draw. I also like the guidance for the AI. This w... Greg Shah

03:38 PM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> We don't use Draw. We use Inkscape and build it as an SVG. See the diagrams project for samples... Roger Borrello

05/01/2026

02:51 PM Support #9709: Needed: Basic example of configuring separate client and server

Sorry for my late response, I should rebuild FWD certificates and tested the broker setup and the broker setup with t... Sergey Ivanovskiy

08:49 AM Support #9709: Needed: Basic example of configuring separate client and server

Please do. If OK, we'll merge. Greg Shah

08:47 AM Support #9709: Needed: Basic example of configuring separate client and server

I did not test broker setup. Sergey Ivanovskiy

08:38 AM Support #9709: Needed: Basic example of configuring separate client and server

You've tested local spawning, broker spawning and reverse proxy for both local and broker spawning? Greg Shah

08:29 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> Constantin Asofiei wrote:
> > Sergey Ivanovskiy wrote:
> > > Thank you! Yes, I asked for help w... Sergey Ivanovskiy

07:48 AM Support #9709: Needed: Basic example of configuring separate client and server

We don't use Draw. We use Inkscape and build it as an SVG. See the diagrams project for samples. Greg Shah

04/30/2026

05:55 PM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> Sort of.
>
> 1. Using the term "spawns client agents" and "client agent connection" is not cor... Roger Borrello

01:57 PM Support #9709: Needed: Basic example of configuring separate client and server

Sort of.
1. Using the term "spawns client agents" and "client agent connection" is not correct. The term agent ha... Greg Shah

01:42 PM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> > Should any of these documents be where drawings would be located?
>
> Yes. We might also ne... Roger Borrello

10:42 AM Support #9709: Needed: Basic example of configuring separate client and server

Constantin Asofiei wrote:
> Sergey Ivanovskiy wrote:
> > Thank you! Yes, I asked for help with 9709e testing and wa... Greg Shah

08:40 AM Support #9709: Needed: Basic example of configuring separate client and server

> Should any of these documents be where drawings would be located?
Yes. We might also need something high level ... Greg Shah

04/29/2026

07:40 PM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> A separate system on which clients can be run is just one that:
>
> # Has all the installation... Roger Borrello

04/25/2026

01:47 AM Support #9709: Needed: Basic example of configuring separate client and server

I tested a standalone direct file upload testcase with the current trunk and did not find a regression. All web clien... Sergey Ivanovskiy

11:58 PM Support #9709: Needed: Basic example of configuring separate client and server

Eugenie Lyzenko wrote:
> Sergey Ivanovskiy wrote:
> > 9709d has been merged into the trunk as rev 16534. 9709d will... Sergey Ivanovskiy

04/24/2026

05:14 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> 9709d has been merged into the trunk as rev 16534. 9709d will be archived.
Unfortunate... Eugenie Lyzenko

08:04 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Thank you! Yes, I asked for help with 9709e testing and waiting approvals for this commit... Constantin Asofiei

08:03 AM Support #9709: Needed: Basic example of configuring separate client and server

9709d has been merged into the trunk as rev 16534. 9709d will be archived. Sergey Ivanovskiy

08:02 AM Support #9709: Needed: Basic example of configuring separate client and server

Thank you! Yes, I asked for help with 9709e testing and waiting approvals for this commit (#9709-846). Sergey Ivanovskiy

04:57 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Constantin, I accidentally missed Roger's commit, so we need to wait until Roger will com... Constantin Asofiei

04:31 AM Support #9709: Needed: Basic example of configuring separate client and server

Constantin, I accidentally missed Roger's commit, so we need to wait until Roger will commit the fix. I guess we shou... Sergey Ivanovskiy

04:27 AM Support #9709: Needed: Basic example of configuring separate client and server

Roger Borrello wrote:
> Constantin Asofiei wrote:
> > I think the 2 fail cases need to be fixed.
>
> Fixes in re... Sergey Ivanovskiy

04:20 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> 9709d is ready, the current rev. 16559.
Merge 9709d now. If 9709e can't be ready in the ... Constantin Asofiei

04:17 AM Support #9709: Needed: Basic example of configuring separate client and server

9709d is ready, the current rev. 16559. Sergey Ivanovskiy

03:20 AM Support #9709: Needed: Basic example of configuring separate client and server

Constantin Asofiei wrote:
> 9709d can be merged after 9709e (or before if 9709e takes some more time).
OK. Updating... Sergey Ivanovskiy

02:48 AM Support #9709: Needed: Basic example of configuring separate client and server

Eugenie Lyzenko wrote:
> Sergey,
>
> What troubles you have with M to use? May be I missed some tests in my smoke... Sergey Ivanovskiy

01:56 AM Support #9709: Needed: Basic example of configuring separate client and server

9709d can be merged after 9709e (or before if 9709e takes some more time). Constantin Asofiei

04/23/2026

04:07 PM Support #9709: Needed: Basic example of configuring separate client and server

Finished smoke tests with M. Everything looks good. I do not see any suspicious.
Sergey,
What troubles you have... Eugenie Lyzenko

02:40 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Eugenie, 9709e is based on rev 16533.
Thanks for info. I need this to ensure compatibi... Eugenie Lyzenko

02:37 PM Support #9709: Needed: Basic example of configuring separate client and server

Eugenie, 9709e is based on rev 16533.
Sergey Ivanovskiy

02:36 PM Support #9709: Needed: Basic example of configuring separate client and server

9709e was updated up to rev 16545 over the current trunk rev 16533. Sergey Ivanovskiy

02:04 PM Support #9709: Needed: Basic example of configuring separate client and server

Constantin Asofiei wrote:
> I think the 2 fail cases need to be fixed.
Fixes in revision 16552.
Roger Borrello

01:09 PM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> Sergey Ivanovskiy wrote:
> > OK, I will fix this in the documentation. I have strange issues in ... Eugenie Lyzenko

01:07 PM Support #9709: Needed: Basic example of configuring separate client and server

Yes Greg Shah

12:56 PM Support #9709: Needed: Basic example of configuring separate client and server

Should I rebase 9709e? Sergey Ivanovskiy

12:55 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> OK, I will fix this in the documentation. I have strange issues in my local system and wo... Greg Shah

12:49 PM Support #9709: Needed: Basic example of configuring separate client and server

OK, I will fix this in the documentation. I have strange issues in my local system and would like that 9709e will be ... Sergey Ivanovskiy

12:43 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Greg Shah wrote:
> > Sergey: Have you completed the documentation changes in item 1 from... Greg Shah

12:40 PM Support #9709: Needed: Basic example of configuring separate client and server

Greg Shah wrote:
> Sergey: Have you completed the documentation changes in item 1 from #9709-807?
Yes, I added one ... Sergey Ivanovskiy

12:19 PM Support #9709: Needed: Basic example of configuring separate client and server

Roger Borrello wrote:
> Constantin Asofiei wrote:
> > Roger, you've made changes in 9709d:
> > * tools/scripts/fwd... Constantin Asofiei

12:13 PM Support #9709: Needed: Basic example of configuring separate client and server

Sergey: Have you completed the documentation changes in item 1 from #9709-807? Greg Shah

12:11 PM Support #9709 (Merge Pending): Needed: Basic example of configuring separate client and server

You can merge 9709e to trunk now. Greg Shah

11:20 AM Support #9709: Needed: Basic example of configuring separate client and server

Yes, 9709e should not affect any existing configurations. I tested Hotel_Gui and the customer application. Sergey Ivanovskiy

10:00 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Greg, I have system issues because for Ubuntu 24.04 virtual environment SSO plugin works ... Greg Shah

07:32 AM Support #9709: Needed: Basic example of configuring separate client and server

Greg, I have system issues because for Ubuntu 24.04 virtual environment SSO plugin works properly with 9709e. Thus, 9... Sergey Ivanovskiy

03:08 AM Support #9709: Needed: Basic example of configuring separate client and server

Thank you, Nginx does not matter. It means that I have local issues. Sergey Ivanovskiy

03:07 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> Stefanel, could you check the trunk version and Hotel_Gui projects with SSO plugin. I got... Stefanel Pezamosca

01:25 AM Support #9709: Needed: Basic example of configuring separate client and server

Constantin Asofiei wrote:
> Roger, you've made changes in 9709d:
> * tools/scripts/fwd_jdk_query.sh - I can't run i... Roger Borrello

12:09 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> According to spawn error *The spawn process failed with 149 error.* the spawn code was fa... Sergey Ivanovskiy

04/22/2026

11:17 AM Support #9709: Needed: Basic example of configuring separate client and server

According to spawn error *The spawn process failed with 149 error.* the spawn code was failed at this point... Sergey Ivanovskiy

08:48 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> I used this SSO plugin options
> [...]
> Stefanel, is it correct?
Yes, this is the d... Stefanel Pezamosca

08:42 AM Support #9709: Needed: Basic example of configuring separate client and server

I used this SSO plugin options... Sergey Ivanovskiy

08:19 AM Support #9709 (WIP): Needed: Basic example of configuring separate client and server

Ok. There is an issue to spawn a web client if SSO plugin is used with Nginx proxy server. Sergey Ivanovskiy

07:53 AM Support #9709: Needed: Basic example of configuring separate client and server

Sergey Ivanovskiy wrote:
> @9709e@ passed tests although SSO login doesn't work in Nginx proxy environment with @970... Greg Shah

01:43 AM Support #9709: Needed: Basic example of configuring separate client and server

@9709e@ passed tests although SSO login doesn't work in Nginx proxy environment with @9709e@ and the current trunk ve... Sergey Ivanovskiy

12:31 AM Support #9709: Needed: Basic example of configuring separate client and server

Constantin Asofiei wrote:
> Roger, you've made changes in 9709d:
> * tools/scripts/fwd_jdk_query.sh - I can't run i... Sergey Ivanovskiy

12:28 AM Support #9709: Needed: Basic example of configuring separate client and server

#9709-823 is reproduced only with SSO plugin, but OS user authentication works properly with the current @trunk@ vers... Sergey Ivanovskiy