FWD » Core Development » Database

06/09/2025

07:37 PM Feature #10094: RECIDs from different tenants of same logical database should not overlap

I am not sure I fully understand the question.
TL;DR: If the import decides that a table is processed, the indexes... Ovidiu Maxiniuc

08:03 AM Feature #10094: RECIDs from different tenants of same logical database should not overlap

Does this mean that existing imported databases may have some indexes which need to be dropped? Greg Shah

06/06/2025

06:55 PM Feature #10094: RECIDs from different tenants of same logical database should not overlap

As discussed with Constantin, I did a bit of reworking on the import to be sure the indexes of the tables are correct... Ovidiu Maxiniuc

08:14 PM Feature #10094 (Review): RECIDs from different tenants of same logical database should not overlap

I have created branch 10094a and committed the changes as revision 15970.
The implementation was actually easier t... Ovidiu Maxiniuc

11:18 AM Bug #10083: Infinite loop when changing walking index fields

CHUI Regression tests passed with 10083a. ☑️
Large GUI Application unit tests passed. ☑️ Eduard Soltan

07:11 AM Bug #10083 (Internal Test): Infinite loop when changing walking index fields

Tomasz Domin wrote:
> Do you mean @10083a/15961@ as I can confirm that, results are fine with @10083a/15961@.
> Why... Eduard Soltan

06:41 AM Bug #10083: Infinite loop when changing walking index fields

Eduard Soltan wrote:
> Tomasz Domin wrote:
> > Eduard Soltan wrote:
> > > Tomasz, could you run it again with 1008... Tomasz Domin

05:40 AM Bug #10083: Infinite loop when changing walking index fields

Tomasz Domin wrote:
> Eduard Soltan wrote:
> > Tomasz, could you run it again with 10083-13 patch?
>
> The resul... Eduard Soltan

02:46 AM Bug #10083: Infinite loop when changing walking index fields

Eduard Soltan wrote:
> Tomasz, could you run it again with 10083-13 patch?
The result stays the same:... Tomasz Domin

02:34 AM Bug #10083: Infinite loop when changing walking index fields

Eduard Soltan wrote:
> Tomasz, could you run it again with 10083-13 patch?
I am working on this. Is this patch fo... Tomasz Domin

02:23 AM Bug #10083: Infinite loop when changing walking index fields

Tomasz, could you run it again with 10083-13 patch? Eduard Soltan

10:55 AM Support #10101: broader testing of various database performance configuration options

Different database implementations offer various performance tuning configuration settings. For example, PostgreSQL o... Eric Faulhaber

02:08 AM Bug #10104: Analyze performance drop after rev. 15963

This task aims to analyze the performance drop of trunk rev 15963.
In one of our testing, a performance decrease of... Andrei Iacob

01:58 AM Bug #10104 (New): Analyze performance drop after rev. 15963

Andrei Iacob

06/05/2025

03:51 PM Support #10101 (New): broader testing of various database performance configuration options

Eric Faulhaber

02:09 PM Bug #10080: Temp-table records are leaking in can-find statements

Tested performed:
- unit tests of a large gui application ✅
- chui regression tests ✅
Is any additional testin... Eduard Soltan

02:00 AM Bug #10080: Temp-table records are leaking in can-find statements

Constantin Asofiei wrote:
> Eduard, please see #10088-57 - is this task fixing the CAN-FIND sub-select, so that now ... Eduard Soltan

01:51 AM Bug #10080: Temp-table records are leaking in can-find statements

Eduard, please see #10088-57 - is this task fixing the CAN-FIND sub-select, so that now it correctly has the _multipl... Constantin Asofiei

12:39 PM Bug #10083: Infinite loop when changing walking index fields

Eduard Soltan wrote:
> Tomasz Domin wrote:
> > No wiki yet.
> > See #9270, #6860#80, @support/harness/readme.txt@ ... Tomasz Domin

09:54 AM Bug #10083: Infinite loop when changing walking index fields

... Eduard Soltan

09:23 AM Bug #10083: Infinite loop when changing walking index fields

Tomasz Domin wrote:
> I've run @support/harness/test/cross_session_test.xml@ dirty share tests and they fail much mo... Eduard Soltan

09:12 AM Bug #10083: Infinite loop when changing walking index fields

Tomasz Domin wrote:
> No wiki yet.
> See #9270, #6860#80, @support/harness/readme.txt@ (that will go into Wiki)
> ... Eduard Soltan

05:53 AM Bug #10083: Infinite loop when changing walking index fields

No wiki yet.
See #9270, #6860#80, @support/harness/readme.txt@ (that will go into Wiki)
Attached @zfile_set.txt@ fo... Tomasz Domin

05:04 AM Bug #10083: Infinite loop when changing walking index fields

Is there a wiki to run @support/harness/test/cross_session_test.xml@?. I tried to run them myself it was giving me al... Eduard Soltan

04:54 AM Bug #10083: Infinite loop when changing walking index fields

I've run @support/harness/test/cross_session_test.xml@ dirty share tests and they fail much more compared to @trunk@.... Tomasz Domin

12:12 PM Feature #7504: Export data tool from FWD into .d files

Lorian Sandu wrote:
> *Roger*, when you are available, please have a look.
Updates look good. Again, the use case f... Roger Borrello

12:08 PM Feature #7504: Export data tool from FWD into .d files

Greg Shah wrote:
> Roger: I would prefer if @import.sh@ *did not* work on multiple database at once. The reasoning:... Roger Borrello

10:00 AM Feature #7504: Export data tool from FWD into .d files

Roger: I would prefer if @import.sh@ *did not* work on multiple database at once. The reasoning: separate logs for e... Greg Shah

06:58 AM Feature #7504: Export data tool from FWD into .d files

Committed to @7504b / rev 15912@ :
@export.sh@:
* added support for multiple databases export
* added support fo... Lorian Sandu

04:01 AM Feature #7504: Export data tool from FWD into .d files

Roger Borrello wrote:
> I'm also curious why you don't allow a list of DBs to be passed in, same as @import.sh@? I'm... Lorian Sandu

09:15 AM Bug #9078: emit FindQuery as (reused) variables

Rebased *9078b* to latest *trunk/15969*, the branch is now at revision *15973*. Dănuț Filimon

03:20 AM Feature #9440: get-codepage() function should work with CLOB fields

Teodor Gorghe wrote:
> Ok, thanks.
> Related to this task, I noticed that the task status become "Internal Test".
... Constantin Asofiei

06/04/2025

02:19 PM Feature #7504: Export data tool from FWD into .d files

> I don't think adding as a reviewer adds as a watcher... is that a function that can be added?
No Greg Shah

11:07 AM Feature #7504: Export data tool from FWD into .d files

I'm also curious why you don't allow a list of DBs to be passed in, same as @import.sh@? I'm not sure I understand th... Roger Borrello

10:44 AM Feature #7504: Export data tool from FWD into .d files

Lorian Sandu wrote:
> Greg Shah wrote:
> > Roger: Please review @export.sh@.
>
> Roger, the revisions that need ... Roger Borrello

08:56 AM Feature #7504: Export data tool from FWD into .d files

Greg Shah wrote:
> Roger: Please review @export.sh@.
Sorry I missed this. I don't think adding as a reviewer adds... Roger Borrello

08:22 AM Feature #7504: Export data tool from FWD into .d files

Attached the @build.properties@, @build.xml@ and @build_db.xml@ from @hotel@ with support for @export@.
After revi... Lorian Sandu

10:01 AM Bug #10080 (Internal Test): Temp-table records are leaking in can-find statements

I see nothing wrong with 10080a r15964.
Please proceed with testing (those from #8308 should do it) if the regress... Ovidiu Maxiniuc

05:04 AM Bug #10080 (Review): Temp-table records are leaking in can-find statements

Eduard Soltan

05:02 AM Bug #10080 (WIP): Temp-table records are leaking in can-find statements

Committed on 10080a, rev. *15964*.
The parameters where not updating in case there were a multiplex id injected in... Eduard Soltan

08:05 AM Feature #10094 (WIP): RECIDs from different tenants of same logical database should not overlap

During the runtime, the PKs even from different private tenants are unique across the logical database since all of t... Ovidiu Maxiniuc

07:31 AM Feature #10094 (Test): RECIDs from different tenants of same logical database should not overlap

Ovidiu Maxiniuc

05:01 AM Feature #7020: always use "expanded" extent fields

Radu tested @7020d@ with @<parameter name="expand-extents" value="false" />@ in @p2j.cfg.xml@ for the large GUI Appli... Stefanel Pezamosca

06/03/2025

03:01 PM Bug #10083: Infinite loop when changing walking index fields

I am not sure, but I think I made similar change in past and there was a problem. Let me check it with testcases/dirt... Tomasz Domin

01:47 AM Bug #10083 (Review): Infinite loop when changing walking index fields

Eduard Soltan

01:46 AM Bug #10083 (WIP): Infinite loop when changing walking index fields

With the patch from #10083-1, unit tests of a customer application does not get stuck in a infinite loop. Committed m... Eduard Soltan

04:05 AM Feature #7504: Export data tool from FWD into .d files

Greg Shah wrote:
> Roger: Please review @export.sh@.
Roger, the revisions that need to be reviewed from @7504b@ a... Lorian Sandu

03:44 AM Bug #10080: Temp-table records are leaking in can-find statements

The scenario from #10076-1 is:... Șerban Bursuc

06/02/2025

04:38 PM Bug #10083: Infinite loop when changing walking index fields

Manage to create a small test case for infinite loop in unit tests in customer application. Please also look at the *... Eduard Soltan

04:37 PM Bug #10083 (Test): Infinite loop when changing walking index fields

Eduard Soltan

02:50 PM Feature #7504: Export data tool from FWD into .d files

Roger: Please review @export.sh@. Greg Shah

12:49 PM Feature #7504: Export data tool from FWD into .d files

I added the support for exporting using @ant export.db@ .
The changes are in @build.xml@ and @build_db.xml@.
Sh... Lorian Sandu

10:34 AM Feature #7504: Export data tool from FWD into .d files

I created @export.sh@ and committed it to -@7504b / rev 15910@- @7504b / rev 15911@.
It it stored in @tools/script... Lorian Sandu

09:16 AM Bug #10080: Temp-table records are leaking in can-find statements

Original test case can be found in #8308-505. There are also more tests committed in xfer testcases/1753.
The chan... Dănuț Filimon

09:13 AM Bug #10080 (Test): Temp-table records are leaking in can-find statements

Dănuț Filimon

07:44 AM Feature #9440: get-codepage() function should work with CLOB fields

Ok, thanks.
Related to this task, I noticed that the task status become "Internal Test".
What tests do I need to run? Teodor Gorghe

07:40 AM Feature #9440 (Internal Test): get-codepage() function should work with CLOB fields

I'm OK with the changes. Constantin Asofiei

05/31/2025

08:50 PM Feature #9456: implement SQL Server dialect and helpers

Revision 15960 of 9456a contains the fix from #9456-6. It was successful on hotel import and (probably - technical is... Ovidiu Maxiniuc

05/30/2025

01:33 PM Feature #9456: implement SQL Server dialect and helpers

MSSQL has this syntax - see https://stackoverflow.com/questions/767657/how-do-i-create-a-unique-constraint-that-also-... Constantin Asofiei

11:45 AM Feature #7504: Export data tool from FWD into .d files

Right :(. It was my developer side talking :). Ovidiu Maxiniuc

11:18 AM Feature #7504: Export data tool from FWD into .d files

The ant target is only there when the conversion project is there. In production, it is not there, so the @export.sh... Greg Shah

11:05 AM Feature #7504: Export data tool from FWD into .d files

My vote is for @ant@ target. It's more flexible and the configuration is already there (@build.properties@). Ovidiu Maxiniuc

03:36 AM Feature #7504: Export data tool from FWD into .d files

I think the best way to deliver this is through an @export.sh@ similar to @import.sh@ we already have.
You can also ... Alexandru Lungu

05/29/2025

08:45 AM Feature #7504: Export data tool from FWD into .d files

Ovidiu Maxiniuc wrote:
> I had a look at r15908 of 7504b.
>
> I noticed that the @main()@ method in @ExportWorker... Lorian Sandu

08:05 AM Feature #9831 (Closed): add admin API to set c3p0 configuration for individual tenant databases

Thanks, Brian! Greg Shah

07:53 AM Feature #9831: add admin API to set c3p0 configuration for individual tenant databases

Testing now that all three RedMine issues are in place with the directory.xml removal of breakAfterAcquireFailure
ht... Brian Woodard

05/28/2025

01:26 PM Feature #9456: implement SQL Server dialect and helpers

To the list above I need to add another bullet:
* MSSQL does not allow multiple @null@ in unique indexes.
The solut... Ovidiu Maxiniuc

12:16 PM Feature #7504: Export data tool from FWD into .d files

I had a look at r15908 of 7504b.
I noticed that the @main()@ method in @ExportWorker@ lacks the javadoc.
Also, ... Ovidiu Maxiniuc

07:22 AM Feature #7504: Export data tool from FWD into .d files

Ovidiu Maxiniuc wrote:
> When I did the capture, I only looked up the occurrences, but did not do any further resear... Lorian Sandu

10:05 AM Bug #10049 (Test): UDF configuration regression in Persistence.java

Branch 10049a was merged into trunk as rev. 15946 and archived. Ovidiu Maxiniuc

08:50 AM Bug #10049 (Merge Pending): UDF configuration regression in Persistence.java

Please merge 10049a now. Constantin Asofiei

03:10 AM Bug #9763 (Test): xml-node-name buffer option

9763b was merged to trunk rev. 15942 and archived. Eduard Soltan

03:00 AM Bug #9763 (Merge Pending): xml-node-name buffer option

Eduard, you can merge 9763b now. Constantin Asofiei

05/27/2025

03:53 PM Bug #10049: UDF configuration regression in Persistence.java

*There is no new UDF added. Only a small runtime change.*
As noted in first note, the problem was an incorrect det... Ovidiu Maxiniuc

03:40 PM Bug #10049: UDF configuration regression in Persistence.java

This is only a runtime change, with no new UDF installation (or other special handling/configuration or devops) requi... Eric Faulhaber

03:18 PM Bug #10049: UDF configuration regression in Persistence.java

The aforementioned test passed. Ovidiu Maxiniuc

12:24 PM Feature #7504: Export data tool from FWD into .d files

OK, you mentioned only 2 occurrences, but I knew that there are more calls of the method from the base class.
When... Ovidiu Maxiniuc

02:49 AM Feature #7504: Export data tool from FWD into .d files

Ovidiu Maxiniuc wrote:
> I'm also on Idea and I see 35 of them. Maybe you have a filter of some kind?
> I cannot ex... Lorian Sandu

09:55 AM Bug #9763: xml-node-name buffer option

No, everything seems correct now. Ovidiu Maxiniuc

06:00 AM Bug #9763: xml-node-name buffer option

Review for 9763b rev 15950:
* BufferImpl - missing history number
* RecordBuffer - no actual change, use 'bzr rever... Constantin Asofiei

02:56 AM Feature #7020: always use "expanded" extent fields

7020d was rebased to latest trunk (rev. 15941) and it's now at revision 15959. Stefanel Pezamosca

05/26/2025

05:37 PM Feature #9456: implement SQL Server dialect and helpers

With my latest changes from 9456a, I was able to convert and import the @hotel@ database into a MS SQL Server instanc... Ovidiu Maxiniuc

03:58 PM Bug #10049 (Internal Test): UDF configuration regression in Persistence.java

OK, then I am putting this to the test.
This area is accessed each time a @Persistence@ object is initialized. The... Ovidiu Maxiniuc

02:22 PM Bug #10049: UDF configuration regression in Persistence.java

I'm OK with the changes. Constantin Asofiei

01:34 PM Bug #10049 (Review): UDF configuration regression in Persistence.java

Constantin, please review the fix since it is a bit different (I rewrote 4 lines to be more human readable) than what... Ovidiu Maxiniuc

01:32 PM Bug #10049 (Internal Test): UDF configuration regression in Persistence.java

Constantin noticed a flaw in the configuration of UDF (SQL native vs deprecated Java). Just by chance, I identified t... Ovidiu Maxiniuc

01:17 PM Bug #10049 (Test): UDF configuration regression in Persistence.java

Ovidiu Maxiniuc

12:15 PM Bug #9763: xml-node-name buffer option

Fixed rebase issues in rev. 15950. Is additional testing necessary? Eduard Soltan

10:55 AM Bug #9763: xml-node-name buffer option

I had one more quick look over 9763b, r15949.
In @BufferImpl.java@, I think there is a rebase error, @** 139 ES 2... Ovidiu Maxiniuc

08:19 AM Bug #9763: xml-node-name buffer option

Eduard Soltan wrote:
> Yes it the 9763b branch, I run 9763b @bzr push --overwrite ~/secure/code/p2j_repo/p2j/active/... Eduard Soltan

08:07 AM Bug #9763: xml-node-name buffer option

Ovidiu Maxiniuc wrote:
> Do you mean 9763b? The current revision is 15835. Is it possible you pushed to different br... Eduard Soltan

08:03 AM Bug #9763: xml-node-name buffer option

Do you mean 9763b? The current revision is 15835. Is it possible you pushed to different branch? Ovidiu Maxiniuc

07:58 AM Bug #9763: xml-node-name buffer option

Rebased to latest trunk, *rev. 15937*. Did some quick smoke testing and unit tests of a large GUI application and it ... Eduard Soltan

11:14 AM Feature #7504: Export data tool from FWD into .d files

I'm also on Idea and I see 35 of them. Maybe you have a filter of some kind?
I cannot export this list so I attached... Ovidiu Maxiniuc

08:16 AM Feature #7504: Export data tool from FWD into .d files

I've reviewed the usages of @toStringExport()@:
* Within the @raw@ class: it's only used in @toString()@, which can ... Lorian Sandu

07:56 AM Feature #7504: Export data tool from FWD into .d files

+Review of 7504b / r15907+
I think there might be some issues with current changes from @raw@ class. The problem i... Ovidiu Maxiniuc

07:28 AM Feature #7504: Export data tool from FWD into .d files

Ovidiu Maxiniuc wrote:
> +Review of 7504b / r15906+
>
> * @raw.java@: The problem is that the @toStringExport()@ ... Lorian Sandu

05:23 AM Feature #9543 (Test): implement missing BUFFER attributes

9543b was merged to trunk 15936 and archived. Eduard Soltan

04:43 AM Feature #9543 (Merge Pending): implement missing BUFFER attributes

Please merge 9543b after 10027a Constantin Asofiei

01:32 AM Feature #9543: implement missing BUFFER attributes

Ovidiu Maxiniuc wrote:
> I think the update is safe.
>
> But, before the merge into trunk, please add the followi... Eduard Soltan

05/23/2025

04:06 PM Feature #9543: implement missing BUFFER attributes

I think the update is safe.
But, before the merge into trunk, please add the following changes (no code affected, ... Ovidiu Maxiniuc

05:30 AM Feature #9543: implement missing BUFFER attributes

Some additional testing should be performed or it could merged to trunk? Eduard Soltan

12:34 AM Feature #9543: implement missing BUFFER attributes

Summary of the testing performed:
- unit tests and smoke tests of large GUI appplication ✅
- smoke tests of a ... Eduard Soltan

03:02 PM Feature #7504: Export data tool from FWD into .d files

+Review of 7504b / r15906+
Good job. Just some minor issues:
* @Record.java@:2099: a space is required after @if@... Ovidiu Maxiniuc

07:32 AM Feature #7504: Export data tool from FWD into .d files

Thanks for the review, Ovidiu.
Sorry for the formatting issues, i've addressed all of them in rev @15906@.
> * ... Lorian Sandu

12:40 PM Feature #7020: always use "expanded" extent fields

Roger Borrello wrote:
> Will the addition of this parameter in @p2j.cfg.xml@ break conversion if #7020 fix is not in... Stefanel Pezamosca

12:37 PM Feature #7020: always use "expanded" extent fields

Stefanel Pezamosca wrote:
> Yes, that's correct.
Thanks. I have this in the @p2j.cfg.xml@ I will check into the p... Roger Borrello

12:28 PM Feature #7020: always use "expanded" extent fields

Roger Borrello wrote:
> Stefanel Pezamosca wrote:
> > The thing changed in 7020d is the @denorm-extents@ from @p2j.... Stefanel Pezamosca

12:23 PM Feature #7020: always use "expanded" extent fields

Stefanel Pezamosca wrote:
> The thing changed in 7020d is the @denorm-extents@ from @p2j.cfg.xml@ that was renamed w... Roger Borrello

11:15 AM Feature #7020: always use "expanded" extent fields

Alexandru Lungu wrote:
> > Does 7020d remove normalized extent support completely? If so, then we have to resolve #7... Greg Shah

10:51 AM Feature #7020: always use "expanded" extent fields

Greg Shah wrote:
> Is there any reason to hold back 9537a? Has it been tested enough?
Yes 9537a has been tested an... Stefanel Pezamosca

10:27 AM Feature #7020: always use "expanded" extent fields

> Does 7020d remove normalized extent support completely? If so, then we have to resolve #7020-122 before we merge. O... Alexandru Lungu

09:10 AM Feature #7020: always use "expanded" extent fields

Greg Shah wrote:
> > I think such process should be documented and create a task per customer (for us to test).
>
... Lorian Sandu

09:07 AM Feature #7020: always use "expanded" extent fields

> I think such process should be documented and create a task per customer (for us to test).
Agreed.
It is my u... Greg Shah

08:38 AM Feature #7020: always use "expanded" extent fields

> Are there any other tests that should be done for 7020d?
Stefanel, from my understanding, 7020d is making any sc... Alexandru Lungu

05/22/2025

02:48 PM Feature #7504: Export data tool from FWD into .d files

+Review of 7504b / r15905+
It seems pretty advanced to me. None of the next issues are really serious, but they sh... Ovidiu Maxiniuc

09:25 AM Feature #7504 (Review): Export data tool from FWD into .d files

I have committed my changes to @7504b / rev 15905@.
Ovidiu, when you have a moment, could you please take a look? ... Lorian Sandu

10:02 AM Bug #10026: A multi-table AdaptiveQuery running off-end is still updating the cursor

I made a testcase: {{Collapse(See testcase)... Stefanel Pezamosca

03:33 AM Bug #9994 (Feedback): Err: Cannot run GET methods on query until it is opened.

Stefanel Pezamosca

05/21/2025

01:28 PM Feature #7504: Export data tool from FWD into .d files

While exporting data from a tenant database i found this error when reading a datetimetz value from the database
<pr... Lorian Sandu

05:27 AM Feature #7504: Export data tool from FWD into .d files

Yes.
That's the *size of the payload*. In other words, *the offset at which the the footer starts* (the file offset ... Ovidiu Maxiniuc

04:00 AM Feature #7504: Export data tool from FWD into .d files

The implementation is nearly complete; however, I still need some information regarding the PSC footer.... Lorian Sandu

10:09 AM Bug #10026: A multi-table AdaptiveQuery running off-end is still updating the cursor

> Do you have an example/testcase that shows this? At the moment I don't understand how this case should look like su... Alexandru Lungu

09:58 AM Bug #10026: A multi-table AdaptiveQuery running off-end is still updating the cursor

Alexandru Lungu wrote:
> * Extra: please check in OE what happens if buffers are loaded with something else before a... Stefanel Pezamosca

04:58 AM Bug #10026 (WIP): A multi-table AdaptiveQuery running off-end is still updating the cursor

Stefanel Pezamosca

04:45 AM Bug #10026: A multi-table AdaptiveQuery running off-end is still updating the cursor

From #10000:
> First and foremost, there is Eduard's change in trunk rev. 15701 where buffers from components 2 on... Alexandru Lungu

04:28 AM Bug #10026 (WIP): A multi-table AdaptiveQuery running off-end is still updating the cursor

Alexandru Lungu

09:50 AM Feature #9543: implement missing BUFFER attributes

Unit tests and fwd tests of large application passed. An issue was reported there but it seems that it was a problem ... Eduard Soltan

08:04 AM Feature #9440: get-codepage() function should work with CLOB fields

Commited revision *1758* on *testcases*.
Commited revision *15913* on P2J branch *9440a*. Teodor Gorghe

05:40 AM Feature #9440: get-codepage() function should work with CLOB fields

Teodor Gorghe wrote:
> When using @get-codepage(buffer ttTable::fInt)@, on OpenEdge, it does not throw any error. Th... Constantin Asofiei

05:11 AM Feature #9440: get-codepage() function should work with CLOB fields

When using @get-codepage(buffer ttTable::fInt)@, on OpenEdge, it does not throw any error. The returned value is @?@.... Teodor Gorghe

03:25 AM Feature #9440: get-codepage() function should work with CLOB fields

Please expand the test to also use @get-codepage(buffer ttTable::fClob)@ (i.e. the POLY case which should convert to ... Constantin Asofiei

03:23 AM Feature #9440: get-codepage() function should work with CLOB fields

I modified the @/tests/base_language/builtin_functions/functionality/TestGetCodepage.cls@ to use @SESSION:CPINTERNAL@... Teodor Gorghe

03:16 AM Feature #9440: get-codepage() function should work with CLOB fields

I'm OK with the changes in rev 15912.
What standalone tests did you use for this? Constantin Asofiei

03:59 AM Feature #7020: always use "expanded" extent fields

Task branch 7020d was rebased to trunk revision 15922.
7020d is now at revision 15940.
Are there any other tests... Stefanel Pezamosca

02:43 AM Bug #9969 (WIP): Parsing query string error with \r character.

Reverted rev *15910* and rev *15900* from trunk in *15920*. Octavian Adrian Gavril

05/20/2025

11:37 AM Feature #7020: always use "expanded" extent fields

Cool. I presumed that, but needed a confirmation. Ovidiu Maxiniuc

09:51 AM Feature #7020: always use "expanded" extent fields

Ovidiu Maxiniuc wrote:
> If I am not mistaken, in the case of the GUI project with harness test, the application is ... Stefanel Pezamosca

09:39 AM Feature #7020: always use "expanded" extent fields

Nice catch!
The changes in 7020d, r15920 are good.
If I am not mistaken, in the case of the GUI project with harn... Ovidiu Maxiniuc

07:35 AM Feature #7020: always use "expanded" extent fields

Lorian helped me test 7020d on his project. During the tests, we discovered an issue related to the SQL generation fo... Stefanel Pezamosca

06:06 AM Bug #9016 (Review): Improve performance in FQLPreprocessor by using astCache

Committed 9016a/15919. Added astCache to FQLPreprocessor().
Alexandru, please review. Dănuț Filimon

06:06 AM Bug #9016 (WIP): Improve performance in FQLPreprocessor by using astCache

Had a discussion with Artur and this task was mentioned. However, this might not improve the performance in his scena... Dănuț Filimon

05:43 AM Feature #9440: get-codepage() function should work with CLOB fields

Commited revision 15912 on branch 9440a.
Replaced @new character()@ with @character.UNKNOWN@ on @longchar.getCodePag... Teodor Gorghe

03:03 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

From my POV, I suggest waiting until we receive a clear response from the customer, as the original task is currently... Paula Păstrăguș

02:03 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

Since this task doesn't reflect the actual issue discovered in 9810-100, I think it should be marked as Rejected at t... Stefanel Pezamosca

05/19/2025

09:31 AM Feature #7504: Export data tool from FWD into .d files

Create a new task for the import bug. Greg Shah

09:26 AM Feature #7504: Export data tool from FWD into .d files

Lorian Sandu wrote:
> Greg Shah wrote:
> > > After import, the stored value in the database was @1919-12-31@ (disre... Lorian Sandu

08:03 AM Feature #9440: get-codepage() function should work with CLOB fields

Commited revision 15911 on branch 9440a.
I changed the @builtin_functions.rules@, with the changes you provided. In ... Teodor Gorghe

07:29 AM Feature #9440: get-codepage() function should work with CLOB fields

Review of 15910 rev 9440a:
* this must nest the @rule@s (like if/then/(if/then/else)/else); currently is is (if/then... Constantin Asofiei

07:22 AM Feature #9440 (Review): get-codepage() function should work with CLOB fields

Teodor Gorghe

07:22 AM Feature #9440: get-codepage() function should work with CLOB fields

Commited revision 15910 on branch 9440a, with the changes according to the latest code review. Teodor Gorghe

03:31 AM Feature #9440 (WIP): get-codepage() function should work with CLOB fields

Teodor, review of 9440a rev 15909:
* @builtin_functions.rules@ - this code:... Constantin Asofiei

02:24 AM Feature #9440 (Review): get-codepage() function should work with CLOB fields

Teodor Gorghe

04:25 AM Bug #9937 (Test): buffer argument with different DMO than the parameter

9937a was merged to trunk rev. 15914 and archived. Eduard Soltan

04:04 AM Bug #9937 (Merge Pending): buffer argument with different DMO than the parameter

Please merge 9937a now. Constantin Asofiei

03:48 AM Bug #9937: buffer argument with different DMO than the parameter

Testing of 2 customers applications went successful. Eduard Soltan

02:35 AM Bug #9969: Parsing query string error with \r character.

Ovidiu Maxiniuc wrote:
> After upgrading to trunk 15913 (including 15910), the antlr build target results in a lot (... Octavian Adrian Gavril

05/16/2025

06:31 PM Bug #9969: Parsing query string error with \r character.

After upgrading to trunk 15913 (including 15910), the antlr build target results in a lot (30+) of nondeterminism err... Ovidiu Maxiniuc

10:04 AM Bug #9969: Parsing query string error with \r character.

Constantin Asofiei wrote:
> I think we need to handle and escape all control characters - see https://www.ascii-code... Octavian Adrian Gavril

10:00 AM Bug #9969: Parsing query string error with \r character.

I think we need to handle and escape all control characters - see https://www.ascii-code.com/characters/control-chara... Constantin Asofiei

09:55 AM Bug #9969: Parsing query string error with \r character.

This is more related to #8027 than this task. Octavian Adrian Gavril

09:54 AM Bug #9969: Parsing query string error with \r character.

Constantin Asofiei wrote:
> Octavian, I think there may be a problem. In a project there is a var defined like:
> ... Octavian Adrian Gavril

09:43 AM Bug #9969: Parsing query string error with \r character.

Octavian, I think there may be a problem. In a project there is a var defined like:... Constantin Asofiei

06:57 AM Bug #9969 (Test): Parsing query string error with \r character.

Branch *9969a* was merged into trunk as *rev. 15910* and archived. Octavian Adrian Gavril

06:33 AM Bug #9969 (Merge Pending): Parsing query string error with \r character.

Please merge to trunk after 9834a. Greg Shah

03:16 AM Bug #9969: Parsing query string error with \r character.

Conversion of appserver application completed successfully. The runtime is also working fine. Octavian Adrian Gavril

12:47 PM Feature #7020: always use "expanded" extent fields

+Review of 7020d r15919+
I see nothing wrong with the new code. In fact, I slightly remember writing code similar ... Ovidiu Maxiniuc

07:34 AM Feature #7020: always use "expanded" extent fields

Ovidiu, could you take a quick look at 7020d revision 15919? Stefanel Pezamosca

09:46 AM Feature #9440: get-codepage() function should work with CLOB fields

I did managed to get the testcases project setup done. Right now, TestGetCodepage.cls fails because the code page is ... Teodor Gorghe

07:04 AM Feature #9440 (WIP): get-codepage() function should work with CLOB fields

Commited revision 15909 on branch 9440a.
- Implemented a new method on I18nOps getCodePage(BaseDataType).
- Changed... Teodor Gorghe

08:40 AM Feature #7504: Export data tool from FWD into .d files

Greg Shah wrote:
> > After import, the stored value in the database was @1919-12-31@ (disregarding the formatting), ... Lorian Sandu

08:31 AM Feature #7504: Export data tool from FWD into .d files

> After import, the stored value in the database was @1919-12-31@ (disregarding the formatting), which indicates the ... Greg Shah

08:26 AM Feature #7504: Export data tool from FWD into .d files

I tested my current implementation by exporting data from a large database and comparing the newly generated @*.d@ fi... Lorian Sandu

06:39 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

As Constantin pointed out in #9810-98, this error also occurs in OE in situations where a field is used but not defin... Stefanel Pezamosca

06:13 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

Okay, but this still doesn’t explain why a customer application fails with this exact error when running a query like... Paula Păstrăguș

05:52 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

This could be the issue, as the @f3@ column is added manually and is not part of the @.df@. Additionally, the @f3@ pr... Stefanel Pezamosca

05:48 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

I’ve attached the .d and .df files. After importing them, please update the pt table in pgAdmin by adding a new colum... Paula Păstrăguș

05:38 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

Paula Păstrăguș wrote:
> I m using rev *15907*. I'm still able to replicate the issue.
Please post the DB schema ... Alexandru Lungu

05:26 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

It seems the browser I’m using is messing with the task info a bit :) Sorry for the inconvenience! Paula Păstrăguș

05:24 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

I m using rev *15907*. I'm still able to replicate the issue. Paula Păstrăguș

05:02 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

I don't get the error as in #9994-1, the query is parsed correctly on my side. Am I missing something? Paula, could y... Stefanel Pezamosca

04:45 AM Bug #9994 (WIP): Err: Cannot run GET methods on query until it is opened.

Stefanel Pezamosca

04:45 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

First observation: The error does not reproduce when using a temp-table.
This works:
{{Collapse(Temp-Table testcase... Stefanel Pezamosca

04:40 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

Unfortunately, I think this is an urgent one. It makes a customer application freeze, and the logs are overly populat... Radu Apetrii

04:28 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

Paula/Radu, please adjust the priority of this task accordingly. Alexandru Lungu

05:29 AM Feature #9477: implement missing QUERY handle methods/attributes

> REPOSITION-BACKWARDS (full/basic)
> REPOSITION-FORWARDS (full/basic)
AFAIK, these are both supported at convers... Alexandru Lungu

05/15/2025

06:32 PM Feature #9543 (Internal Test): implement missing BUFFER attributes

I looked at the changes of this last revision. I think they should work. A couple of notes:
* the @isBufferCopyDesti... Ovidiu Maxiniuc

05:38 PM Feature #9546: investigate and implement field options, if missing

First, a disclaimer: there is little information about these attributes, including on progress.com. The statements be... Ovidiu Maxiniuc

01:14 PM Feature #9546: investigate and implement field options, if missing

Eric, these are from the .df, right?
Ovidiu: can you take a quick look at would need to be implemented? Constantin Asofiei

01:18 PM Feature #9477: implement missing QUERY handle methods/attributes

Alexandru, do you have any insight about the reposition methods in the first note? I recall seeing mentions about rep... Constantin Asofiei

11:34 AM Feature #9831: add admin API to set c3p0 configuration for individual tenant databases

The concern is from Cloud Ops because they do not have access directly to the databases in production. On our local ... Brian Woodard

11:23 AM Feature #9831: add admin API to set c3p0 configuration for individual tenant databases

I am sorry for the trouble.
The SQL statements stand in notes 6 (for PgSQL) and 8 (for H2). I adjusted them by dro... Ovidiu Maxiniuc

10:18 AM Feature #9831: add admin API to set c3p0 configuration for individual tenant databases

This was a breaking change for deployed environments because the upgrade of the landlord schema changes were not auto... Brian Woodard

10:22 AM Bug #9994: Err: Cannot run GET methods on query until it is opened.

This error is thrown when performing @GET-NEXT@ on a query like the following:
@for each pt where f3 = false and f... Paula Păstrăguș

10:17 AM Bug #9994 (Rejected): Err: Cannot run GET methods on query until it is opened.

Paula Păstrăguș

09:43 AM Feature #7504: Export data tool from FWD into .d files

+Update on the Implementation+
* Successfully made the @ExportWorker@ runnable in offline mode using a lightweight... Lorian Sandu

09:00 AM Bug #9969 (Internal Test): Parsing query string error with \r character.

Yes, you're right. Greg Shah

08:19 AM Bug #9969: Parsing query string error with \r character.

Shouldn't I wait for the appserver application conversion test results? Octavian Adrian Gavril

08:16 AM Bug #9969 (Merge Pending): Parsing query string error with \r character.

You can merge to trunk now. Greg Shah

08:11 AM Bug #9969: Parsing query string error with \r character.

Greg Shah wrote:
> > I used this testcase to see if the behavior is as expected:
> > [...]
> >
> > Converted cod... Octavian Adrian Gavril

08:05 AM Bug #9969: Parsing query string error with \r character.

> I used this testcase to see if the behavior is as expected:
> [...]
>
> Converted code with @unixEscapes@ on @t... Greg Shah

07:51 AM Bug #9969: Parsing query string error with \r character.

Eduard mentioned in #4602-50 that exception is not thrown anymore. Octavian Adrian Gavril

06:41 AM Bug #9969: Parsing query string error with \r character.

The conversion of another large GUI customer application was successfully completed. No source code differences were ... Octavian Adrian Gavril

03:12 AM Bug #9969 (Internal Test): Parsing query string error with \r character.

I've restarted the conversion regression testing plan with changes from *15904*:
* Conversion of large GUI customer ... Octavian Adrian Gavril

08:17 AM Bug #9937: buffer argument with different DMO than the parameter

Could 9937a be merge to trunk, or additional tests should be done? Eduard Soltan

05:48 AM Bug #9937: buffer argument with different DMO than the parameter

Eduard Soltan wrote:
> Asked Danut to run ETF, we should have the results by tomorrow.
ETF tests passed. Dănuț Filimon

08:34 PM Feature #9456: implement SQL Server dialect and helpers

A few weeks ago I created task branch 9456a for holding changes which would bring SQL Server dialect closer to all ot... Ovidiu Maxiniuc

08:33 PM Feature #9455: port native user defined functions to SQL Server

The goal of this task is to track the porting of native UDF functions for Microsoft SQL Server.
I already did par... Ovidiu Maxiniuc

05/14/2025

04:25 PM Feature #9831: add admin API to set c3p0 configuration for individual tenant databases

The @breakAfterAcquireFailure@ is no longer settable. It is always active (that is, its value is @true@).
For more d... Ovidiu Maxiniuc

10:39 AM Feature #9831: add admin API to set c3p0 configuration for individual tenant databases

I wanted to confirm that the breakAfterAcquireFailure is no longer needed in the directory.xml and is now being force... Brian Woodard

02:59 PM Feature #7504: Export data tool from FWD into .d files

Isn't the @dumpName@ attribute of @@Table@ DMO annotation useful (4GL @DUMP-NAME@ attribute) and neither the field na... Ovidiu Maxiniuc

02:21 PM Feature #7504: Export data tool from FWD into .d files

Greg Shah wrote:
> > In OE the .d file stores the name of the *.blb file
>
> At a minimum we should use @blb@ and... Lorian Sandu

02:19 PM Feature #7504: Export data tool from FWD into .d files

The export isn't converted code and does not need to be executed using the FWD client. Writing the dump on the serv... Greg Shah

12:53 PM Feature #7504: Export data tool from FWD into .d files

Eric Faulhaber wrote:
> Do the exported files need to be on the client? It seems like going through the legacy strea... Lorian Sandu

12:47 PM Feature #7504: Export data tool from FWD into .d files

Do the exported files need to be on the client? It seems like going through the legacy stream support will be a perfo... Eric Faulhaber

11:06 AM Feature #7504: Export data tool from FWD into .d files

> In OE the .d file stores the name of the *.blb file
At a minimum we should use @blb@ and @clb@ instead of @null@... Greg Shah

10:51 AM Feature #7504: Export data tool from FWD into .d files

Lorian Sandu wrote:
> When importing the database, we don't store the original name of the file at the dmo level, th... Ovidiu Maxiniuc

10:41 AM Feature #7504: Export data tool from FWD into .d files

I've got a working version and managed to export the data from the database to @.d@ files.
A few things i want to di... Lorian Sandu

08:51 AM Bug #9937: buffer argument with different DMO than the parameter

Asked Danut to run ETF, we should have the results by tomorrow. Eduard Soltan

08:45 AM Bug #9937: buffer argument with different DMO than the parameter

Eduard Soltan wrote:
> Constantin Asofiei wrote:
>
> > Please continue testing.
>
> Runtime for Chui regressio... Constantin Asofiei

08:38 AM Bug #9937: buffer argument with different DMO than the parameter

Constantin Asofiei wrote:
> Please continue testing.
Runtime for Chui regression testing and unit tests of a la... Eduard Soltan

08:35 AM Bug #9937 (Internal Test): buffer argument with different DMO than the parameter

Eduard Soltan wrote:
> Changed @defineAlias@ and @makeArgumentBuffer@ to create a proxy without @plugin@. Committed ... Constantin Asofiei

05:07 AM Bug #9937: buffer argument with different DMO than the parameter

Changed @defineAlias@ and @makeArgumentBuffer@ to create a proxy without @plugin@. Committed on #9937, rev. 15892.
... Eduard Soltan

08:31 AM Feature #9543: implement missing BUFFER attributes

Some improvements of @buffer-copy@ in batch mode are in 9543b, rev. 15894. Eduard Soltan

08:28 AM Feature #9543: implement missing BUFFER attributes

Ovidiu Maxiniuc wrote:
> Review of 9543b, r15893.
>
> * @RecordBuffer.java@:
> ** line 2019: the field is missin... Eduard Soltan

06:34 AM Feature #9543: implement missing BUFFER attributes

Review of 9543b, r15893.
* @RecordBuffer.java@:
** line 2019: the field is missing the javadoc;
** lines 3650, 4... Ovidiu Maxiniuc

08:27 AM Feature #7020: always use "expanded" extent fields

After the rebase with the latest trunk, I discovered another issue related with fields include/exclude functionality.... Stefanel Pezamosca

07:26 AM Bug #9969 (Review): Parsing query string error with \r character.

I've reverted the changes from @character.java@ in *9969a/15904*. This double backslash gets an unescaped '\' charact... Octavian Adrian Gavril

06:36 AM Bug #9969 (WIP): Parsing query string error with \r character.

Octavian Adrian Gavril

06:36 AM Bug #9969: Parsing query string error with \r character.

The conversion of the ChUI regression test application completed successfully, but the source compilation failed. The... Octavian Adrian Gavril

03:06 AM Bug #9969: Parsing query string error with \r character.

The conversion of a large GUI client application has been completed successfully. The conversion log is clean and the... Octavian Adrian Gavril

05/13/2025

07:05 PM Feature #9831 (Test): add admin API to set c3p0 configuration for individual tenant databases

Branch 9831a was merged to trunk rev. 15905 and archived. Ovidiu Maxiniuc

06:48 PM Feature #9831 (Merge Pending): add admin API to set c3p0 configuration for individual tenant data...

The minor changes for #9988-12 look fine.
Please merge 9831a to trunk now. Eric Faulhaber

05:54 PM Feature #7504: Export data tool from FWD into .d files

Lorian, I think you are on the right track:
* indeed, @DmoMeta.getFields()@ will give you the correct order of field... Ovidiu Maxiniuc

06:31 AM Feature #7504: Export data tool from FWD into .d files

I have started working on the implementation.
Taking into consideration the discussion from the previous notes, i'... Lorian Sandu

03:53 AM Feature #7504: Export data tool from FWD into .d files

I am raising the priority to High.
Please make regular updates on this task on the progress. Alexandru Lungu

09:28 AM Feature #7020: always use "expanded" extent fields

I attached an sql script that will help with renaming old extent word tables, indexes and dropping old triggers/trigg... Stefanel Pezamosca

02:37 AM Feature #7020: always use "expanded" extent fields

I have rebased 7020d to trunk revision 15902 and it's now at rev.15918. Stefanel Pezamosca

08:07 AM Bug #9937 (Review): buffer argument with different DMO than the parameter

With 9937a, rev. 15890.
Unit tests of a customer application and Chui regression testing project are passing withou... Eduard Soltan

07:20 AM Bug #9969: Parsing query string error with \r character.

This affects all string processing in the lexer in a profound way. Full conversion testing is needed. Greg Shah

06:59 AM Bug #9969: Parsing query string error with \r character.

Is conversion regression tesing necessary or run-time testing is enough? Octavian Adrian Gavril

06:51 AM Bug #9969 (Internal Test): Parsing query string error with \r character.

Code Review Task Branch 9969a Revisions 15901 through 15903
I'm OK with the changes. Let's get it tested across a... Greg Shah

03:32 AM Bug #9969: Parsing query string error with \r character.

Ovidiu Maxiniuc wrote:
> +Review of 9969a/r15902.+
>
> * @UnicodeTranslationException@: missing javadocs for both... Octavian Adrian Gavril

03:14 AM Bug #9969: Parsing query string error with \r character.

Ovidiu Maxiniuc wrote:
> +Review of 9969a/r15902.+
>
> * @progress.g@: My understanding is that the inlines for n... Octavian Adrian Gavril

06:42 AM Bug #9318 (Review): Make record nursery visible on removeRecords

*9318a* contains *conversion changes* for Buffer.delete() and *runtime changes*, the test plan is:
* ETF (ddf) - alr... Dănuț Filimon

06:36 AM Bug #9318: Make record nursery visible on removeRecords

> I rebased 9381a to trunk/15894 a while ago and the branch is now at revision 9318a/15898.
Please move this into ... Alexandru Lungu

06:29 AM Bug #9318: Make record nursery visible on removeRecords

I rebased *9381a* to *trunk/15894* a while ago and the branch is now at revision *9318a/15898*.
I also retested E... Dănuț Filimon

03:33 AM Feature #9543: implement missing BUFFER attributes

Ovidiu Maxiniuc wrote:
> +Review of 9543b, r15892.+
>
> * @RecordBuffer.java@
> ** lines 1708, 1711, 2200: I do ... Eduard Soltan

05/12/2025

07:21 PM Feature #9976: eliminating DMO usage in inter-program linkage

> For parameters, the buffers should not construct their own @BaseRecord@, but use the 'pointer' to one already creat... Greg Shah

06:27 PM Feature #9976: eliminating DMO usage in inter-program linkage

Greg,
I am not sure I got all detail, in spite of being focused on the 1st not for some time now. It's clear we will... Ovidiu Maxiniuc

08:52 AM Feature #9976: eliminating DMO usage in inter-program linkage

In the 4GL, there is no concept of a DMO. From the beginning (in the 1980s), the 4GL has always directly mapped comp... Greg Shah

03:57 PM Bug #9969: Parsing query string error with \r character.

+Review of 9969a/r15902.+
* @UnicodeTranslationException@: missing javadocs for both the class and the constructor... Ovidiu Maxiniuc

10:38 AM Bug #9969 (Review): Parsing query string error with \r character.

Octavian Adrian Gavril

10:36 AM Bug #9969: Parsing query string error with \r character.

I made a few changes that fix the way Java escaping is handled. First, in @ClearStream.java@ sequences (with '\') are... Octavian Adrian Gavril

09:08 AM Bug #9969: Parsing query string error with \r character.

Branch *9969a* was rebased with trunk. The new revision is *15901*. Octavian Adrian Gavril

04:20 AM Bug #9969: Parsing query string error with \r character.

Greg wrote:
> Octavian Adrian Gavril wrote:
> > I investigated the issue. I think we can apply the "\r" processing ... Octavian Adrian Gavril

10:47 AM Bug #9937: buffer argument with different DMO than the parameter

I found a regression with 9937a changes related to extend fields.
For extend fields in @ProxyAssembler@ there are ... Eduard Soltan

03:44 AM Bug #9937 (Internal Test): buffer argument with different DMO than the parameter

Eduard Soltan wrote:
> Alexandru Lungu wrote:
> > Review of 9937a:
> > * @RecordBuffer.bufferProxy@ is a new stat... Alexandru Lungu

03:29 AM Bug #9937: buffer argument with different DMO than the parameter

Alexandru Lungu wrote:
> Review of 9937a:
> * @RecordBuffer.bufferProxy@ is a new static method added with your ch... Eduard Soltan

03:24 AM Bug #9937: buffer argument with different DMO than the parameter

Alexandru Lungu wrote:
>If this is statically impossible, then I think I am fully OK with the changes.
From my te... Eduard Soltan

03:06 AM Bug #9937: buffer argument with different DMO than the parameter

Clear. This seems to be a case where we need to "disguise" a DMO as another DMO just to satisfy Java's strong type ch... Alexandru Lungu

09:51 AM Bug #9683 (WIP): CompoundQuery is doing extra hydration attempts

Alexandru Lungu

09:51 AM Bug #9683: CompoundQuery is doing extra hydration attempts

Review of 9683a:
* @implements@ should be aligned to @public@ (at 3 spaces from the start of the line).
* Typo in @... Alexandru Lungu

08:03 AM Feature #9543: implement missing BUFFER attributes

+Review of 9543b, r15892.+
I think you are on the right track, but there are a couple of issues which should be ad... Ovidiu Maxiniuc

04:19 AM Feature #9543 (Review): implement missing BUFFER attributes

It seems that CAN-READ attribute is no longer used in client application. So I will move this task in review. Eduard Soltan

07:26 AM Feature #7020: always use "expanded" extent fields

We don't want to leave behind any traces of the old modes. Greg Shah

07:24 AM Feature #7020: always use "expanded" extent fields

Apart from the situation described above, 7020d has been tested continuously with two projects I had on hand, but I w... Stefanel Pezamosca

07:20 AM Feature #7020: always use "expanded" extent fields

I have one last question:
With @denorm-extent@, @wordTableName@ was generated as @table__extname_1@ (since the field... Stefanel Pezamosca