Activity

From 10/14/2012 to 11/12/2012

11/13/2012

11:40 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: This is an interesting idea, but it is pretty intrusive in the DMOs. Let's go with your first approach, limiting the... Eric Faulhaber

11/12/2012

06:03 PM Base Language Support #1700: test the startup, basic processing and shutdown of the P2J server and P2J client o...: The new version with commented out the dead command has been uploaded. Eugenie Lyzenko
01:34 PM Base Language Support #1700: test the startup, basic processing and shutdown of the P2J server and P2J client o...: > Package the changes as a proper update zip. These do not affect anything in the conversion or runtime, so we will j... Eugenie Lyzenko
11:43 AM Base Language Support #1700: test the startup, basic processing and shutdown of the P2J server and P2J client o...: Package the changes as a proper update zip. These do not affect anything in the conversion or runtime, so we will ju... Greg Shah
01:02 PM Base Language Feature #1590: implement PROPATH assignment: Added revised proposed update Costin Savin
10:43 AM Base Language Feature #1590: implement PROPATH assignment: Please see the P2J Conversion Handbook, Project Setup chapter. In the "Global Configuration" section, look at the "un... Greg Shah
10:16 AM Base Language Feature #1590: implement PROPATH assignment: After looking for error replication discovered it fails when \ is at the end of the string operand.
Example:
<p... Costin Savin
08:27 AM Base Language Feature #1590: implement PROPATH assignment: Feedback on the code:
1. EnvironmentOps still needs the copyright date updated to 2012.
2. Please put the first... Greg Shah
08:10 AM Base Language Feature #1590: implement PROPATH assignment: Please show a very small sample 4GL procedure here where Progress deals with "\" correctly and P2J fails. Make the c... Greg Shah
12:46 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The changes are in bzr. Eugenie Lyzenko
11:33 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: ... Greg Shah
11:31 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: > Please check in your update to Bazaar. Remember that in Bazaar, we do NOT do any tagging of history entries.
>
>... Eugenie Lyzenko
10:50 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Please check in your update to Bazaar. Remember that in Bazaar, we do NOT do any tagging of history entries.
Do m... Greg Shah
10:48 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: -------- Original Message --------
Subject: Re: The Windows conversion related update
Date: Wed, 07 Nov 2012 18:3... Greg Shah
11:54 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: Indeed, the @snapshot@ seems to be used for a similar reason, but I see it's only used for undo-s, it only stores ses... Ovidiu Maxiniuc
10:46 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: Please review the use of the @snapshot@ instance variable in @RecordBuffer@. Can this variable (i.e., when it is a d... Eric Faulhaber
11:14 AM Conversion Tools Feature #1579 (Closed): review and merge 12/2011 conversion fixes into main P2J code base, regres...: Greg Shah
09:25 AM Database Feature #1911: add runtime support for sequences: See parent issue for requirements.
Runtime implementations of the statement/functions should leverage dialect infr... Eric Faulhaber
09:21 AM Database Feature #1910 (New): add schema conversion support for sequences: See parent issue for description of what must be converted.
The statements in the schema export (.df) file must be... Eric Faulhaber
03:54 AM Base Language Feature #1921: implement super-procedures: Implement the following 4GL features:
FUNCTION ... IN SUPER
PROCEDURE ... IN SUPER
RUN SUPER statement
SUPER func... Constantin Asofiei
03:53 AM Base Language Feature #1921 (Closed): implement super-procedures: Constantin Asofiei

11/11/2012

03:09 PM Database Feature #1580: upgrade Hibernate to latest level: In order to get rid of the "(org.hibernate.internal.util.xml.DTDEntityResolver:WARN) HHH000223: Recognized obsolete h... Stanislav Lomany
02:54 PM Database Feature #1580: upgrade Hibernate to latest level: In order to enable EhCache, the following entry should be added to the directory:... Stanislav Lomany

11/10/2012

12:23 PM Base Language Feature #1590: implement PROPATH assignment: Added proposed update. Costin Savin
12:12 PM Base Language Feature #1590: implement PROPATH assignment: Already tried that with the same result - conversion fail, however double "\\" seems to work fine with p2j and progre... Costin Savin

11/09/2012

06:07 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: One more, pure database field test:
def temp-table tt
field f1 as logical
field f2 as logical.
create tt... Vadim Nebogatov
05:30 PM Base Language Feature #1590: implement PROPATH assignment: For now, just use the preprocessor conditional processing and the OPSYS built-in to detect the platform on which the ... Greg Shah
04:23 PM Base Language Feature #1590: implement PROPATH assignment: There seems to be a problem with slash and backslash when defining directories
When run on windows PROGRESS using "... Costin Savin
04:03 PM Base Language Support #1700: test the startup, basic processing and shutdown of the P2J server and P2J client o...: The new tests does not have the issues except one that related to the Swing screen representation. The basic function... Eugenie Lyzenko
12:07 PM Base Language Feature #1606: implement persistent procedures/super procedures: I've added #1920 for persistent procedures; I suggest to leave this task for tracking the implementation of the super... Constantin Asofiei
08:41 AM Base Language Feature #1606: implement persistent procedures/super procedures: I agree that we must work around the fact that the super-procedure chain is built at runtime NOT at compile time. You... Constantin Asofiei
08:18 AM Base Language Feature #1606: implement persistent procedures/super procedures: One approach is to use reflection to fully and "naturally" implement the features. We know that will work and it can... Greg Shah
08:10 AM Base Language Feature #1606: implement persistent procedures/super procedures: One of the major design decisions will relate to how we handle the super procedure chain. The idea of super procedur... Greg Shah
08:04 AM Base Language Feature #1606 (WIP): implement persistent procedures/super procedures: Constantin Asofiei
12:05 PM Base Language Feature #1920: implement persistent procedures: Implement the following 4GL features:
RUN [ PERSISTENT [SET handle]] [IN handle]
DELETE PROCEDURE/OBJECT statemen... Constantin Asofiei
12:03 PM Base Language Feature #1920 (Closed): implement persistent procedures: Constantin Asofiei
11:51 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: A small problem regarding the implementation:
I could not find in the hibernate documentation a way to detect if a r... Ovidiu Maxiniuc
11:22 AM Database Feature #1919: update HQLPreprocessor and calling code to better handle WHERE TRUE and WHERE FALS...: Runtime where clause optimizations can roll up a where clause such that the result passed to Hibernate is simply WHER... Eric Faulhaber
10:55 AM Database Feature #1919 (New): update HQLPreprocessor and calling code to better handle WHERE TRUE and WHER...: Eric Faulhaber
10:53 AM Database Feature #1580: upgrade Hibernate to latest level: Stanislav Lomany wrote:
> WHERE TRUE or WHERE FALSE are results of P2J runtime query optimization. I agree that we s... Eric Faulhaber
10:22 AM Database Feature #1580: upgrade Hibernate to latest level: > Under what circumstances do we need to support WHERE TRUE and WHERE FALSE? Is this something we should optimize du... Stanislav Lomany
09:56 AM Database Feature #1580: upgrade Hibernate to latest level: Stanislav Lomany wrote:
> I found that HQL parser doesn't support WHERE TRUE or WHERE FALSE where clause. I've appli... Eric Faulhaber
09:50 AM Database Feature #1580: upgrade Hibernate to latest level: If we didn't already have this workaround for a similar case, I would say let's fix it in Hibernate, but since we are... Eric Faulhaber
08:37 AM Database Feature #1580: upgrade Hibernate to latest level: Class cast exception bug exists in Hibernate bug tracker: https://hibernate.onjira.com/browse/HHH-4700 , not fixed ye... Stanislav Lomany
10:40 AM Database Feature #1601 (Closed): implement NUMERIC type in relational database schemas: I'm not sure to what this issue refers. Some time back, we added precision and scale information to the DDL for NUME... Eric Faulhaber
08:48 AM Database Bug #1913: default locking in a BROWSE widget: .df file attached.
.d file is irrelevant.
Ovidiu Maxiniuc
08:25 AM Conversion Tools Feature #1579 (Review): review and merge 12/2011 conversion fixes into main P2J code base, regres...: All changed docs are in bazaar (search for [CA] tag):
handbook: other_customization.odt running_conversion.odt
ref... Constantin Asofiei
06:46 AM Runtime Infrastructure Feature #1916: improve the runtime statistics gathered by P2J: The attached files contain changes which expand the metrics gathered by BlockManager (to include total execution time... Constantin Asofiei
06:41 AM Runtime Infrastructure Feature #1916 (New): improve the runtime statistics gathered by P2J: Constantin Asofiei

11/08/2012

05:41 PM Database Bug #1913: default locking in a BROWSE widget: Please attach your test database's *.df file (and *.d file(s), if any), so that the worker of this issue can run the ... Eric Faulhaber
09:46 AM Database Bug #1913: default locking in a BROWSE widget: It appears that I have uncovered a bug in how we deal with default locking in a BROWSE widgets.
In order to test CUR... Ovidiu Maxiniuc
09:36 AM Database Bug #1913 (New): default locking in a BROWSE widget: Ovidiu Maxiniuc
03:26 PM Base Language Feature #1590: implement PROPATH assignment: This does not work in the 4GL for a simple reason: most language statements that deal with the file system do not DIR... Greg Shah
02:47 PM Base Language Feature #1590: implement PROPATH assignment: Tried the following for creating a file... Costin Savin
11:55 AM Base Language Feature #1590: implement PROPATH assignment: I will implementing the 2nd choice, what I wanted to say about p2j starting from where the client is running referred... Costin Savin
11:08 AM Base Language Feature #1590: implement PROPATH assignment: ... Greg Shah
11:01 AM Base Language Feature #1590: implement PROPATH assignment: Ran with the full path of prowin32:
When it is ran in this configuration the reference path "." is the directory whe... Costin Savin
09:47 AM Base Language Feature #1590: implement PROPATH assignment: I don't know, it is possible that the PATH does not include the Progress directories. But you can do 2 simple things... Greg Shah
09:12 AM Base Language Feature #1590: implement PROPATH assignment: prowin32 and pro are not recognized as internal or external command, operable program or batch file on the Progress t... Costin Savin
08:47 AM Base Language Feature #1590: implement PROPATH assignment: Your problems all stem from the fact that when you run the test program from the "Procedure Editor", the environment ... Greg Shah
06:02 AM Base Language Feature #1590: implement PROPATH assignment: Progress seems to support relative paths in general so not sure why it wouldn't support it in PROPATH also
After run... Costin Savin
02:07 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Please go ahead with optimizing these cases (e.g. true is null can be replaced with false). Greg Shah
02:02 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Concerning special cases
true is null
true is not null
false is null
false is not null
nul... Vadim Nebogatov
01:43 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: I agree that this file looks good. So it passes code review.
BUT:
1. There are more issues to resolve before ... Greg Shah
01:25 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Attached variant seems ready to commit (when CVS is unlocked) Vadim Nebogatov
09:37 AM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Feedback on the normalize_expressions.rules changes:
1. You have removed the first line of the file, which should ... Greg Shah
08:43 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: It would be better to test for and avoid emitting things like:
* true is null
* true is not null
* false is null
* fa... Eric Faulhaber
12:09 PM Database Bug #1914: database conversion requires Internet connectivity: While converting a project without being connected to the Internet, I hit an exception when the JVM tried to resolve ... Eric Faulhaber
11:33 AM Database Bug #1914 (Closed): database conversion requires Internet connectivity: Eric Faulhaber
10:22 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: I am using a very simple database (one table with a few records) that I created manually which is somehow similar to ... Ovidiu Maxiniuc
01:15 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: It appears you have uncovered a bug in how we deal with default locking in a BROWSE. BTW, what database are you usin... Eric Faulhaber
10:17 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Both of these can be left out for now. This is not a feature I expect to be included long term. Greg Shah
09:16 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Some questions/info about the reporting changes:
* master_report_from_cache.xml - non-destructive point-in-time mast... Constantin Asofiei
07:30 AM Database Feature #1580: upgrade Hibernate to latest level: 9. Changes into ImportWorker:
Into ImportWorker.Library.initialize:... Stanislav Lomany

11/07/2012

05:15 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Changed normalize_expressions.rules is attached (Test6 problems). Vadim Nebogatov
11:42 AM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Small correction:
A!=B
should be generated as
(A is null and B is not null) or (A is not null and (B is nu... Vadim Nebogatov
05:02 PM Base Language Feature #1884: add some of the v10 data types and core built-ins: From Adrian:... Greg Shah
03:38 PM Base Language Feature #1884: add some of the v10 data types and core built-ins: There are no differences between CHAR and LONGCHAR related to code page.
* CODEPAGE–CONVERT works the same way for C... Adrian Lungu
02:46 PM Base Language Feature #1590: implement PROPATH assignment: The other question: does Progress support relative paths in the PROPATH? I suspect it does, but you should determine... Greg Shah
02:43 PM Base Language Feature #1590: implement PROPATH assignment: It seems like SEARCH(PROGRAM-NAME(1)) will return the fully qualified filename of the current program (so long as the... Greg Shah
02:33 PM Base Language Feature #1590: implement PROPATH assignment: Researched and tried a couple of Progress methods to see if I can get to find the directory containing the test data ... Costin Savin
11:33 AM Base Language Feature #1590: implement PROPATH assignment: You should not need to prompt the user for pathing. Instead, use the filesystem features of the 4GL to make the prog... Greg Shah
10:11 AM Base Language Feature #1590: implement PROPATH assignment: 20.
The default propath on Progress will allways contain these values:... Costin Savin
12:02 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: However, I was unable to run the converted code from my previous note. When moving from a field to another, the clien... Ovidiu Maxiniuc
10:53 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: To test two buffers within the same session I wrote the following test.
It FINDs the first record, then enables a B... Ovidiu Maxiniuc
07:31 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: With respect to the documentation update, please also update the "master" table of all supported built-in functions i... Eric Faulhaber
07:15 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: Nevermind on @ChangeBroker@; I forgot that is just about changes across buffers in the same session, not across sess... Eric Faulhaber
07:32 PM Database Feature #1595: add conversion and runtime support for DBPARAM() built-in function: With respect to the documentation update, please also update the "master" table of all supported built-in functions i... Eric Faulhaber

11/06/2012

06:15 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: I would expect that this is not a very common case, so my inclination is to fix it in the conversion and leave the mo... Eric Faulhaber
06:03 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: I don't know. I guess that is for you and Vadim to discuss further. Greg Shah
05:42 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Greg Shah wrote:
> Eric: should this change go into the HQLPreprocessor instead of the conversion? The resulting co... Eric Faulhaber
05:19 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Eric: should this change go into the HQLPreprocessor instead of the conversion? The resulting code seems very messy. Greg Shah
04:42 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Problems are with Test8 are related with the following "where" clauses used in AdaptiveQuery constructor:
tt.ff !=f... Vadim Nebogatov
07:25 AM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: All Test6 problems are fixed, Test8 problems are not fixed yet. Vadim Nebogatov
06:12 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: Ovidiu Maxiniuc wrote:
> *Later edit:*
> Just saw that the refresh is called a few lines below. My problem was/is t... Eric Faulhaber
11:10 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: When implementing as described above I got into the following issue:
B has committed the changes to db (I can see thi... Ovidiu Maxiniuc
07:52 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: Here are my 2 test files:... Ovidiu Maxiniuc
11:20 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: Please update the Conversion Reference (builtin_database_functions_methods_attributes.odt chapter) to reflect the imp... Eric Faulhaber
10:51 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: Ovidiu Maxiniuc wrote:
> To implement this we need to analyze the data requested from db when the FIND is called.
>... Eric Faulhaber
05:33 PM Base Language Feature #1884: add some of the v10 data types and core built-ins: My only question so far is related to the codepage info. Is there a difference between how character and longchar ha... Greg Shah
05:16 PM Base Language Feature #1884: add some of the v10 data types and core built-ins: LONGCHAR data type:
* CHARACTER data that is not limited to 32K in size. LONGCHAR variables can be any size (limited... Adrian Lungu
05:31 PM Feature #1912: migrate P2J to Java 7: Build P2J on OpenJDK 7 on local system, work out build issues. Install Oracle Java 7 on lightning. Convert Majic on... Eric Faulhaber
05:26 PM Feature #1912 (Closed): migrate P2J to Java 7: Eric Faulhaber
03:35 PM Base Language Feature #1590: implement PROPATH assignment: FileSystemOps will still need the new setSearchPath() method exposed. Greg Shah
03:16 PM Base Language Feature #1590: implement PROPATH assignment: 3. I forgot that the indentation applies to all code not only to Java Files
For the formatting problems I've set the... Costin Savin
12:33 PM Base Language Feature #1590: implement PROPATH assignment: Please note that I am having to repeat the same feedback as provided previously, because some of the prior feedback w... Greg Shah
10:39 AM Base Language Feature #1590: implement PROPATH assignment: Tests gave the same results on both P2J and Progress
Given the following directory structure... Costin Savin
10:04 AM Base Language Feature #1590: implement PROPATH assignment: Attached equivalent tests used on progress windows os. Costin Savin
10:01 AM Base Language Feature #1590: implement PROPATH assignment: Attached proposed update 2. Costin Savin
02:10 PM Database Feature #1580: upgrade Hibernate to latest level: I've build Hibernate. Although I haven't found any mentions about this, it turned out that Hibernate 4 requires Java ... Stanislav Lomany
07:50 AM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Don't forget that there is also the "master" table of all supported built-in functions in the "Functions" section of ... Greg Shah
11:19 PM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Please update the Conversion Reference (builtin_database_functions_methods_attributes.odt chapter) to reflect the imp... Eric Faulhaber
11:28 PM Database Feature #1910 (Hold): add schema conversion support for sequences: Eric Faulhaber
11:23 PM Database Feature #1910 (Closed): add schema conversion support for sequences: Eric Faulhaber
11:24 PM Database Feature #1911 (Closed): add runtime support for sequences: Eric Faulhaber
11:20 PM Database Feature #1595: add conversion and runtime support for DBPARAM() built-in function: Please update the Conversion Reference (builtin_database_functions_methods_attributes.odt chapter) to reflect the imp... Eric Faulhaber

11/05/2012

02:51 PM Base Language Feature #1590: implement PROPATH assignment: Thanks I managed to figure out what the problem was :)!
Costin Savin
02:36 PM Base Language Feature #1590: implement PROPATH assignment: Show the testcase code (that is behaving strangely) here and also show the output of running it on the 4GL. I will h... Greg Shah
02:34 PM Base Language Feature #1590: implement PROPATH assignment: There seems to be a something wrong with the testcase when run on Progress or a Progress bug.
When assigning a new v... Costin Savin
12:16 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: To implement this we need to analyze the data requested from db when the FIND is called.
I see that the @RandomAcc... Ovidiu Maxiniuc
12:00 PM Base Language Feature #1611: implement QUOTER utility: Feedback:
1. The history entry in rules/annotations/input_output.rules needs to be updated from 009 to 010.
2. ... Greg Shah
11:16 AM Base Language Feature #1611 (Review): implement QUOTER utility: Costin Savin
11:13 AM Base Language Feature #1611: implement QUOTER utility: Is this ready for review? That would mean that you have no known issues and the update fully meets the requirements ... Greg Shah
11:16 AM Base Language Feature #1591 (WIP): implement QUOTER built-in function: Costin Savin
11:14 AM Base Language Feature #1591 (Review): implement QUOTER built-in function: Costin Savin
10:23 AM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Do the proposed changes fully eliminate all differences? Greg Shah
10:21 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The code looks good. If it passes testing, please work with Constantin to get it applied to staging. At that time y... Greg Shah
10:02 AM Runtime Infrastructure Bug #1701 (Closed): Admin UI standard printing methods: Greg Shah
05:18 AM Runtime Infrastructure Bug #1701: Admin UI standard printing methods: I've distributed the update and updated runtime hooks chapter. Stanislav Lomany
05:21 AM Database Feature #1580: upgrade Hibernate to latest level: I've applied old Hibernate patches, still cannot compile it, but .g files were converted so I used them: WHERE TRUE /... Stanislav Lomany
03:13 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Update ca_upd20121102a.zip is applied to CVS. Constantin Asofiei

11/03/2012

08:07 AM Base Language Feature #1611: implement QUOTER utility: Added proposed update for quoter utility. Costin Savin
08:06 AM Base Language Feature #1611: implement QUOTER utility: It seems that Progress replaces null resulting values with @-@, That and the fact that new line character(enter) is d... Costin Savin

11/02/2012

05:19 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The P2J part has been updated:
1. Fixed copyright date stamps
2. The history entries have been merged to have 1 per... Eugenie Lyzenko
04:03 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: OK. I'll prepare the modified updates. And the conversion is identilal for these updates turned on and of in Linux.
... Eugenie Lyzenko
03:53 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Some feedback:
1. annotations.xml should have only 1 history entry (merge them together).
2. p2o.xml needs its co... Greg Shah
04:53 PM Database Feature #1580: upgrade Hibernate to latest level: I found that HQL parser doesn't support WHERE TRUE or WHERE FALSE where clause. I've applied the old Hibernate patche... Stanislav Lomany
04:49 PM Database Feature #1580: upgrade Hibernate to latest level: 1. In many places Hibernate Session.connection() is used, usually in order to create and execute a statement, but thi... Stanislav Lomany
02:25 PM Runtime Infrastructure Support #1900: improve LoadCert JavaDoc and the corresponding documentation in the P2J Runtime In...: In addition to the above, make sure that same improvements made to the JavaDoc are also displayed in the syntax diagr... Greg Shah
02:20 PM Base Language Feature #1591: implement QUOTER built-in function: Feedback on the proposed changes:
1. Each file with a standard header needs the copyright notice updated to 2012 i... Greg Shah
01:53 PM Base Language Feature #1590: implement PROPATH assignment: Now that you have access to the 4GL development system, please make sure that you do more thorough testing of the PRO... Greg Shah
01:27 PM Base Language Feature #1590: implement PROPATH assignment: When you post your updated code, do not delete the old update. I want those to stay around for reference purposes.
... Greg Shah
01:26 PM Base Language Feature #1590: implement PROPATH assignment: Feedback on the proposed changes:
1. Each file with a standard header needs the copyright notice updated to 2012 i... Greg Shah
01:22 PM Base Language Feature #1611: implement QUOTER utility: Good work. Finish off the testing to ensure that you have a complete specification. It is common for the Progress d... Greg Shah
12:54 PM Base Language Feature #1611: implement QUOTER utility: The weird characters that appeared in - c tests seem to be caused by test data being altered at ftp transfer(though i... Costin Savin
01:15 PM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Great! You can also distribute it to everyone at that time.
Based on the changes, please make any needed changes ... Greg Shah
12:17 PM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Latest H2 has passed regression testing. ca_upd20121029a.zip and ca_upd20121102a.zip are applied to staging (P2J is ... Constantin Asofiei
09:40 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Good, thanks. Eric Faulhaber
09:38 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: I'm testing with the latest available H2 jar as of today - Version 1.3.169 (2012-09-09). Constantin Asofiei
09:36 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Are you testing with the latest available H2 jar as of today? Or the newer one we grabbed back in December 2011 (i.e... Eric Faulhaber
09:24 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Regression testing is running. If it passes, I will apply both the ca_upd20121029a.zip and the upgraded H2 to staging. Constantin Asofiei
12:43 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Comparison results (see attached screenshot)
Vadim Nebogatov
11:20 AM Conversion Tools Support #1908: update documentation for Windows conversion: Start by ensuring that the following findings of #1565 are well documented in our books:
1. NTFS or some other fil... Greg Shah
11:12 AM Conversion Tools Support #1908 (New): update documentation for Windows conversion: Greg Shah
10:54 AM Conversion Tools Feature #1907: implement configurable control over the line termination characters used for both ...: See #1565 for some details. Today in Windows, the .java and .cache output files get only a 0x0A (UNIX/Linux line end... Greg Shah
10:50 AM Conversion Tools Feature #1907 (New): implement configurable control over the line termination characters used for...: Greg Shah
10:48 AM Conversion Tools Feature #1906: find a way to programmatically force file.encoding="UTF-8" for the entire JVM when...: See #1565 for details. Greg Shah
10:48 AM Conversion Tools Feature #1906 (New): find a way to programmatically force file.encoding="UTF-8" for the entire JV...: Greg Shah
10:46 AM Conversion Tools Feature #1905: why does P2J_HOME have to be explicitly set for running the conversion on Windows ...: See #1565 for some details. Greg Shah
10:46 AM Conversion Tools Feature #1905 (New): why does P2J_HOME have to be explicitly set for running the conversion on Wi...: Greg Shah
10:44 AM Conversion Tools Feature #1904: update the chemtutor build.xml to handle conversion on Windows: Please see #1565 for details, but to summarize:
1. P2J_HOME had to be explicitly set via java -DP2J_HOME=.
2. The... Greg Shah
10:40 AM Conversion Tools Feature #1904 (New): update the chemtutor build.xml to handle conversion on Windows: Greg Shah
10:27 AM Conversion Tools Feature #1903: disambiguate generated filenames that are only differentiated by a difference in c...: The bottom line is that 4GL code can have user-defined names (external procedure filenames, frame names, table names)... Greg Shah
10:21 AM Conversion Tools Feature #1903 (New): disambiguate generated filenames that are only differentiated by a differenc...: Greg Shah

11/01/2012

07:55 PM Conversion Tools Feature #1902: automatically default global configuration changes based on the platform on which ...: See #1565 for detailed findings.
The p2j.cfg.xml needed to have the following changed to properly convert a Linux ... Greg Shah
07:43 PM Conversion Tools Feature #1902 (New): automatically default global configuration changes based on the platform on ...: Greg Shah
07:41 PM Conversion Tools Feature #1901 (New): modify the conversion process to properly run on Windows: Greg Shah
07:40 PM Runtime Infrastructure Support #1900: improve LoadCert JavaDoc and the corresponding documentation in the P2J Runtime In...: Recently I took a support call to help a customer understand how to run the com/goldencode/p2j/util/LoadCert program.... Greg Shah
07:26 PM Runtime Infrastructure Support #1900 (New): improve LoadCert JavaDoc and the corresponding documentation in the P2J Runt...: Greg Shah
07:20 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: P2J results for updated test case:
test1-1
test1-4
test1-8
test1-11
test1-14
test1-16
test1-18
test1-20
te... Vadim Nebogatov
04:15 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: 4GL results for updated test case:
test1-1
test1-4
test1-8
test1-11
test1-14
test1-16
test1-18
test1-20
te... Vadim Nebogatov
04:14 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Updated test case:
def temp-table tt
field num as int
field f as logical.
create tt. tt.num = 1. tt... Vadim Nebogatov
04:13 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: (not ?) - syntax is incorrect Vadim Nebogatov
05:14 AM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: I should have mentioned this too:
7. Make sure you post your updated version of the testcase code (the 4GL) here.
... Greg Shah
05:12 AM Database Bug #18 (WIP): issues with ne/equal and true/false conversion in WHERE clauses: Questions/requests/comments:
0. I think you mean Progress 4GL, not Postgres 4GL. <g>
1. Please modify the testc... Greg Shah
06:46 PM Support #1899: document the recent changes related to dynamic reloading of jar files: Please update the P2J Runtime Installation, Configuration and Administration Guide to document:
1. What this facil... Greg Shah
06:43 PM Support #1899: document the recent changes related to dynamic reloading of jar files: I can't find a Redmine task that corresponds to this. The results are already committed to CVS and applied to stagin... Greg Shah
06:42 PM Support #1899 (New): document the recent changes related to dynamic reloading of jar files: Greg Shah
05:24 PM User Interface Feature #1898: write a replacement for the CHARVA libTerminal.so as an NCURSES-based Linux shared...: This implementation must be written from scratch without copying any code from libTerminal.so (really: Toolkit.c). H... Greg Shah
05:21 PM User Interface Feature #1898 (Closed): write a replacement for the CHARVA libTerminal.so as an NCURSES-based Lin...: Greg Shah
04:41 PM Base Language Feature #1884: add some of the v10 data types and core built-ins: Some other thoughts on LONGCHAR:
0. Look through the com/goldencode/p2j/util/character class carefully. Also look... Greg Shah
04:22 PM Base Language Feature #1884 (WIP): add some of the v10 data types and core built-ins: Adrian Lungu
04:16 PM Base Language Feature #1884: add some of the v10 data types and core built-ins: The LONGCHAR support provides character data in 4GL that can exceed 32KB in size. Our character class already can ha... Greg Shah
04:17 PM Base Language Feature #1646: implement BASE64-ENCODE/BASE64-DECODE built-in functions: Yes, you're right. I forgot about that dependency. The task #1884 is where we are putting some new data type suppor... Greg Shah
03:40 PM Base Language Feature #1646: implement BASE64-ENCODE/BASE64-DECODE built-in functions: The BASE64-ENCODE function:
Converts binary data into a Base64 character string, and returns a LONGCHAR containing ... Adrian Lungu
09:28 AM Base Language Feature #1646 (WIP): implement BASE64-ENCODE/BASE64-DECODE built-in functions: Adrian Lungu
03:22 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The files to run Windows conversion has been updated merging with the recent code base. The full testing cycle will b... Eugenie Lyzenko
01:37 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Please merge your changes to pattern/customer_specific_annotations.rules with the latest version in the TIMCO CVS pro... Greg Shah
02:47 PM Conversion Tools Feature #1579 (WIP): review and merge 12/2011 conversion fixes into main P2J code base, regressio...: Yes, please upgrade the H2 version. Greg Shah
01:11 PM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: I've added the update to CVS. Not applied to staging yet. Needs full P2J rebuild. Does not affect MAJIC's generated J... Constantin Asofiei
02:46 PM Conversion Tools Feature #1529 (Closed): move customer_specific_conversion.rules into p2j/rules/conversion/ and im...: Greg Shah
12:26 PM Conversion Tools Feature #1529: move customer_specific_conversion.rules into p2j/rules/conversion/ and improve/ref...: This does not affect MAJIC. Regression testing has passed. I've made a small change to standard_customer_specific_too... Constantin Asofiei
02:42 PM Conversion Tools Feature #1530 (Closed): update the "Other Customization" chapter of the Conversion Handbook to ad...: Everything looks good. I cleared the notes. Greg Shah
12:19 PM Conversion Tools Feature #1530 (Review): update the "Other Customization" chapter of the Conversion Handbook to ad...: I've expanded the Details column to include more about how the special annotations can be used and how they affect th... Constantin Asofiei
02:41 PM Conversion Tools Feature #1531 (Closed): update the "Techniques for Integrating Java Code into Reconverted 4GL Cod...: Everything looks good. I cleared the notes. Greg Shah
12:18 PM Conversion Tools Feature #1531 (Review): update the "Techniques for Integrating Java Code into Reconverted 4GL Cod...: Brief answeres to your questions:
1 - I've added details about what function libraries need to be incluced
2 - the ... Constantin Asofiei
12:14 PM Runtime Infrastructure Feature #1895: improve/automate PLJava registration: The idea is to eliminate the need for a separate step to register the pljava.jar and the p2jpl.jar by detecting if it... Greg Shah
12:11 PM Runtime Infrastructure Feature #1895 (New): improve/automate PLJava registration: Greg Shah
10:30 AM Database Feature #1595 (Review): add conversion and runtime support for DBPARAM() built-in function: Ovidiu Maxiniuc
10:29 AM Database Feature #1595 (WIP): add conversion and runtime support for DBPARAM() built-in function: Implemented as specified although I am a little uncertain about some parameters. Ovidiu Maxiniuc
09:28 AM Runtime Infrastructure Bug #1701: Admin UI standard printing methods: I am fine with the change. Please check it into CVS and distribute it.
I want you to apply it to staging too, BUT... Greg Shah
09:16 AM Feature #1453 (Closed): finish the runtime_hooks chapter of the P2J developer guide: I cleaned up some grammar and phrasing and checked it an updated version. VERY GOOD WORK!!!! Greg Shah
07:30 AM Runtime Infrastructure Feature #1894: move the file_sys.xml configuration into name_map.xml: Currently, the file_sys.xml contents must be manually copied into the directory.xml before running the server. This ... Greg Shah
07:27 AM Runtime Infrastructure Feature #1894 (New): move the file_sys.xml configuration into name_map.xml: Greg Shah

10/31/2012

06:57 PM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Reason is found: expressions
(l <> true) and (NOT l)
(l <> false) and ( l)
are not equivalent in Postgres 4GL in ... Vadim Nebogatov
05:34 PM Base Language Feature #1646: implement BASE64-ENCODE/BASE64-DECODE built-in functions: Review the documentation for these functions in the Progress 4GL Language Reference. Write some testcases to ensure ... Greg Shah
05:04 PM Database Feature #1890: upgrade to the latest stable PLJava and ensure that it is available on all target ...: Both 32-bit and 64-bit must be supported. Linux, Solaris and Windows all must be supported. Greg Shah
05:03 PM Database Feature #1890 (Closed): upgrade to the latest stable PLJava and ensure that it is available on al...: Greg Shah
04:58 PM Runtime Infrastructure Bug #1701: Admin UI standard printing methods: Runtime hooks chapter already covers these interfaces. Stanislav Lomany
04:34 PM Runtime Infrastructure Bug #1701: Admin UI standard printing methods: Please update the extending the admin console portion of the Runtime Hooks chapter of the Developer Guide to document... Greg Shah
01:54 PM Runtime Infrastructure Bug #1701: Admin UI standard printing methods: I suggest to make AdminClient.printOn and printExtendedOn function public (now they are package-private) in order to ... Stanislav Lomany
03:04 PM Runtime Infrastructure Feature #29 (Closed): get Jetty patches accepted upstream: Closing this because it is a duplicate of #1525. Greg Shah
02:35 PM Base Language Feature #1885 (Closed): fix and add necessary format string support: Greg Shah
02:21 PM Base Language Feature #1884: add some of the v10 data types and core built-ins: types: DATETIME, LONGCHAR, INT64 (needed for DB support of _lock-recid and for sequences); DATETIME(), NOW(), ADD-INT... Greg Shah
02:21 PM Base Language Feature #1884 (Closed): add some of the v10 data types and core built-ins: Greg Shah
12:45 PM Database Feature #1879: push lock manager back into database: Currently, the default lock manager resides in memory within the P2J application server. All code which needs to com... Eric Faulhaber
12:41 PM Database Feature #1879 (New): push lock manager back into database: Eric Faulhaber
09:54 AM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Uploaded update patch with modifications we discussed yesterday.
The most important change is that special code is... Ovidiu Maxiniuc

10/27/2012

05:23 PM Database Bug #1308: dirty share - related abend: The update (svl_upd20101214a) wasn't applied because it causes errors in Majic (I cannot provide concrete examples).
... Stanislav Lomany

10/26/2012

06:35 PM Base Language Support #1700: test the startup, basic processing and shutdown of the P2J server and P2J client o...: Currently the Swing client starting does not have any obvious issues except font rendering issue already found. Addit... Eugenie Lyzenko
03:09 PM Base Language Feature #1611: implement QUOTER utility: Make sure you keep all of your testcases. Add them to your update, so they get checked in.... Greg Shah
01:49 PM Base Language Feature #1611: implement QUOTER utility: Done several test of Quoter utility use on Progress,
It seems any errors from quoter are only output to the destinati... Costin Savin
01:49 PM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Where are the test cases you wrote for the wider rowid strings? I didn't see that aspect of your research reflected ... Eric Faulhaber
01:44 PM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Feedback from code review:
* Sorry, I was mistaken with respect to the format I originally specified for the rowid st... Eric Faulhaber
11:01 AM Database Feature #1593 (Review): add conversion and runtime support for TO-ROWID() built-in function: Attached update file with changes from last notes and mail from Eric. Ovidiu Maxiniuc
12:23 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: OK, good research. A few more complications to throw into the mix before we can know the best way to implement...
... Eric Faulhaber
10:18 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: I spent some time doing investigations on this issue:
* I created an index on an existing field
* I added a new un-... Ovidiu Maxiniuc

10/25/2012

03:52 PM Base Language Support #1700: test the startup, basic processing and shutdown of the P2J server and P2J client o...: The first issue/difference has been found running swing client in Windows. Look at the screenshots attached. If we us... Eugenie Lyzenko
01:33 PM Base Language Feature #1611: implement QUOTER utility: Thanks for clearing things up. Costin Savin
11:37 AM Base Language Feature #1611: implement QUOTER utility: The general idea is OK. Yes, we need to detect when any child process invocation is using QUOTER and then change the... Greg Shah
12:41 PM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: > I observed that when testing for changed, OE in fact re-read the record (don't know yet if entire record or only af... Eric Faulhaber
03:46 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: To emulate the OpenEdge behavior in P2J runtime I run a few tests. The test cases are a little tricky as they imply h... Ovidiu Maxiniuc
12:04 PM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Ovidiu Maxiniuc wrote:
> Should we use 0, -1 or other negative number as a special case of P2J code?
-1. Eric Faulhaber
05:10 AM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: @ErrorManager.recordOrThrowError()@ methods require a number or a @NumberedException@. I understand that this is in f... Ovidiu Maxiniuc
11:21 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: > I understand that we can't promote staging until the frame_generator.xml problem is fixed. But it seems like we ca... Constantin Asofiei
10:53 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: I understand that we can't promote staging until the frame_generator.xml problem is fixed. But it seems like we can ... Greg Shah
10:51 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: In regard to the StatsWorker version in ecf_upd20111207b.zip, I think the differences with the version in ges_upd2011... Greg Shah
03:43 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Added merged update, with all fixes. Constantin Asofiei
05:35 AM Database Bug #18: issues with ne/equal and true/false conversion in WHERE clauses: Added
OUTPUT TO VALUE("Z:\vadimtest").
to output test results to file.
Tested on the customer's 4GL environmen... Vadim Nebogatov

10/24/2012

02:52 PM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Ovidiu Maxiniuc wrote:
> You are right, the cutting is caused by default print format, in fact I could not find a li... Eric Faulhaber
03:19 AM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: You are right, the cutting is caused by default print format, in fact I could not find a limit for the size of this t... Ovidiu Maxiniuc
02:01 PM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Regression testing has passed. Can't move this to CVS until the #1445 frame_generator.xml problem is solved (I'll att... Constantin Asofiei
11:38 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Greg Shah wrote:
> Eric: is the version I am posting here the final/best one?
My changes in the StatsWorker version ... Eric Faulhaber
10:38 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: I was reviewing the files that I posted and I think I was missing a major change made by Eric to StatsWorker.java in ... Greg Shah
12:05 PM Base Language Feature #1611: implement QUOTER utility: The only solution I came up with yet to get the quoter utility call the method from Quoter class is by checking the f... Costin Savin
11:16 AM Base Language Support #1700 (WIP): test the startup, basic processing and shutdown of the P2J server and P2J cl...: Use the p2j/testcases/simple/ environment to test the server and client on Windows. For now, DON'T test any of the P... Greg Shah
11:10 AM Base Language Support #1700 (Closed): test the startup, basic processing and shutdown of the P2J server and P2J...: Greg Shah
11:11 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Updates to make Windows conversion have been uploaded. Eugenie Lyzenko

10/23/2012

07:19 PM Conversion Tools Feature #1699: remove duplicate validation expressions from business logic: Currently, a separate, inner class is emitted for each validation expression in an external procedure, regardless of ... Eric Faulhaber
07:17 PM Conversion Tools Feature #1699 (New): remove duplicate validation expressions from business logic: Eric Faulhaber
07:17 PM Conversion Tools Feature #1698 (New): remove duplicate frame.openScope() calls from business logic: Eric Faulhaber
07:13 PM Conversion Tools Feature #1697: eliminate duplication of frame definitions: Detect frames that are functionally identical and reuse the same definition in all business logic rather than creatin... Eric Faulhaber
07:07 PM Conversion Tools Feature #1697 (New): eliminate duplication of frame definitions: Eric Faulhaber
07:04 PM Conversion Tools Feature #1696: create a variable to replace multiple uses of a string literal: If the same string literal is used in multiple places (in the same scope), implement a String variable and then refer... Eric Faulhaber
07:04 PM Conversion Tools Feature #1696 (New): create a variable to replace multiple uses of a string literal: Eric Faulhaber
07:01 PM Conversion Tools Feature #1695: evaluate certain constant expressions at conversion time: Examples:
* array dereferencing: constant array indices can be decremented by 1 instead of written as an expression... Eric Faulhaber
06:58 PM Conversion Tools Feature #1695 (New): evaluate certain constant expressions at conversion time: Eric Faulhaber
06:57 PM Conversion Tools Feature #1694: rewrite variable comparisons with the unknown value constant: Convert @x <> ?@ to @!x.isUnknown()@ and convert @x = ?@ to @x.isUnknown()@. Eric Faulhaber
06:56 PM Conversion Tools Feature #1694 (New): rewrite variable comparisons with the unknown value constant: Eric Faulhaber
06:55 PM Conversion Tools Feature #1693: rewrite numeric increment/decrement expressions: Emit @i.increment()@ for an expression like @i = i + 1@. Emit @i.decrement()@ for an expression like @i = i - 1@. Eric Faulhaber
06:54 PM Conversion Tools Feature #1693 (New): rewrite numeric increment/decrement expressions: Eric Faulhaber
06:52 PM Conversion Tools Feature #1692 (New): optimize/rewrite common expression idioms: Eric Faulhaber
06:48 PM Conversion Tools Feature #1691: remove unnecessary handle vars and replace with object of the appropriate type: Detect cases where:
* handle is not shared; AND
* is not passed as a parameter; AND
* is only assigned a single ... Eric Faulhaber
06:47 PM Conversion Tools Feature #1691 (New): remove unnecessary handle vars and replace with object of the appropriate type: Eric Faulhaber
01:57 PM Database Feature #1580 (WIP): upgrade Hibernate to latest level: Eric Faulhaber
01:43 PM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Ovidiu Maxiniuc wrote:
> Bullet 4 is datailed in my next note (4).
> @0x1000000@ is invalid just because the number o... Eric Faulhaber
10:34 AM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Bullet 4 is datailed in my next note (4).
@0x1000000@ is invalid just because the number of digits is odd. However, ... Ovidiu Maxiniuc
10:07 AM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Ovidiu Maxiniuc wrote:
> After some investigation on the OpenEdge installation on windev01 I observed that string re... Eric Faulhaber
08:20 AM Database Feature #1593 (WIP): add conversion and runtime support for TO-ROWID() built-in function: In addition to previous constraints:
* strings representation must have even length. @0x012@, @0xabcde@ are invalid.
... Ovidiu Maxiniuc
05:29 AM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: After some investigation on the OpenEdge installation on windev01 I observed that string representation of @ROWID@s:
... Ovidiu Maxiniuc
12:11 PM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: I have finally taken the time to review this. Sorry about that. Better late than never, I guess.
Answers to your... Greg Shah
11:42 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:40 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:40 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem... Greg Shah
11:39 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:39 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:37 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:36 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:34 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:33 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:33 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:32 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:30 AM Runtime Infrastructure Bug #30: detect denial of service attempt and try to reduce the impact: -------- Original Message --------
Subject: Re: Oasis blocking other secure clients? [was: P2J Connection Problem]
... Greg Shah
11:46 AM Feature #1453 (Review): finish the runtime_hooks chapter of the P2J developer guide: Stanislav Lomany
10:37 AM Database Feature #1594 (WIP): add conversion and runtime support for CURRENT-CHANGED() built-in function: Ovidiu Maxiniuc

10/22/2012

03:12 PM Conversion Tools Feature #1688: move LEAVE/NEXT rewriting from annotations into fixups: This will allow simplification of the code handling this as well as improvements in unreachable processing (which hap... Eric Faulhaber
03:11 PM Conversion Tools Feature #1688 (New): move LEAVE/NEXT rewriting from annotations into fixups: Eric Faulhaber
03:10 PM Conversion Tools Feature #1687: remove frames which are completely scoped to dead code: A frame which is completely scoped to dead code can be safely removed along with the dead code (requires taking into ... Eric Faulhaber
03:09 PM Conversion Tools Feature #1687 (New): remove frames which are completely scoped to dead code: Eric Faulhaber
03:08 PM Conversion Tools Feature #1686: ensure frame definitions properly account for formatting information in otherwise ...: Dead code can have an effect on frame formatting (e.g., format string processing and width calcs for @ base fields) b... Eric Faulhaber
03:07 PM Conversion Tools Feature #1686 (New): ensure frame definitions properly account for formatting information in othe...: Eric Faulhaber
02:47 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: > Don't make any changes to the line termination processing. I'll create a separate task for that and we will work it... Eugenie Lyzenko
02:43 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Don't make any changes to the line termination processing. I'll create a separate task for that and we will work it ... Greg Shah
10:52 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: > Please prepare the full set of changes needed to get the results you have so far. Make sure that the final result i... Eugenie Lyzenko
10:51 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: > I still need the answer to this question. What line termination characters are placed in the output files today?
... Eugenie Lyzenko
09:27 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Making the Windows file system case-sensitive is not an option.
It is clear that we have to rework our name conver... Greg Shah
09:23 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: ... Greg Shah
08:47 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Further investigation shows the following:
1. We can set the NTFS in Windows XP 64-bit to be case sensitive. And i... Eugenie Lyzenko
02:38 PM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Please do add a new Bug issue along with a full testcase, screen shots and any other recreate/description of the prob... Greg Shah
10:35 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Greg,
There is a remainder brws runtime issue which I think should be documented and solved later on. Currently, ... Constantin Asofiei
08:54 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Finished cleaning up all files from the update, I'm reconverting using current staging and I'm going to do regression... Constantin Asofiei
02:30 PM Conversion Tools Feature #1685: log all dead/unreachable code decisions: The log should record whether the result is missing because it was determined to be unreachable (and why). Eric Faulhaber
02:29 PM Conversion Tools Feature #1685 (New): log all dead/unreachable code decisions: Eric Faulhaber
02:28 PM Conversion Tools Feature #1684: variable definitions made in unreachable code actually still exist and can be used...: This is tougher in cases where there is a message statement or format_phrase var definition because there are other s... Eric Faulhaber
02:27 PM Conversion Tools Feature #1684 (New): variable definitions made in unreachable code actually still exist and can b...: Eric Faulhaber
02:25 PM Conversion Tools Feature #1683: rewrite unreachable processing to run in a loop (and/or using ascent rules) to det...: The issue is that if all contents of a particular IF block turn out to be unreachable BUT the IF *is* reachable, then... Eric Faulhaber
02:21 PM Conversion Tools Feature #1683 (New): rewrite unreachable processing to run in a loop (and/or using ascent rules) ...: Eric Faulhaber
02:06 PM Conversion Tools Feature #1682: IF/ELSE unreachable processing needs to promote THEN/ELSE child nodes into enclosi...: This can be single statements (e.g. even "blocks" like REPEAT) or complex groups (any case of a simple DO block). In... Eric Faulhaber
02:05 PM Conversion Tools Feature #1682 (New): IF/ELSE unreachable processing needs to promote THEN/ELSE child nodes into e...: Eric Faulhaber
02:01 PM Conversion Tools Feature #1681: convert "for each foo: i = i + 1. end." to something like RecordBuffer.count(fooDMO): Some other forms would be possible too, taking a where clause to allow a count of all records matching given criteria... Eric Faulhaber
01:57 PM Conversion Tools Feature #1681 (New): convert "for each foo: i = i + 1. end." to something like RecordBuffer.count...: Eric Faulhaber
01:56 PM Conversion Tools Feature #1680: convert "for each foo: delete foo. end." into a simpler form: The idiom of looping through a table and deleting all records in that table is fairly common for older, temp-table co... Eric Faulhaber
01:28 PM Conversion Tools Feature #1680 (New): convert "for each foo: delete foo. end." into a simpler form: Eric Faulhaber
01:38 PM Base Language Feature #1611 (WIP): implement QUOTER utility: Costin Savin
01:37 PM Base Language Feature #1591: implement QUOTER built-in function: Added proposed update for quoter builtin function Costin Savin
01:25 PM Conversion Tools Feature #1679 (New): remove concatenation of empty strings: Eric Faulhaber
01:24 PM Conversion Tools Feature #1678: rollup/simplify/remove dead code usually caused by preprocessor substitutions: Often 4GL preprocessing directives/substitutions will expand to bloated code which converts to something more complic... Eric Faulhaber
01:12 PM Conversion Tools Feature #1678 (New): rollup/simplify/remove dead code usually caused by preprocessor substitutions: Eric Faulhaber
12:18 PM Conversion Tools Feature #1677: deeper analysis of IF/CASE and other condition expressions: For example, a logical variable that is initialized or assigned false and then is never otherwise changed (or passed ... Eric Faulhaber
12:17 PM Conversion Tools Feature #1677 (New): deeper analysis of IF/CASE and other condition expressions: Eric Faulhaber
12:11 PM Conversion Tools Feature #1676 (New): remove conditional expressions that always evaluate true or false: Eric Faulhaber
12:11 PM Conversion Tools Feature #1675 (New): remove unreferenced streams, frames, buffers, temp-tables: Eric Faulhaber
09:46 AM Conversion Tools Feature #1531 (Review): update the "Techniques for Integrating Java Code into Reconverted 4GL Cod...: Constantin Asofiei
09:45 AM Conversion Tools Feature #1530 (Review): update the "Other Customization" chapter of the Conversion Handbook to ad...: Constantin Asofiei
09:45 AM Conversion Tools Feature #1529 (Review): move customer_specific_conversion.rules into p2j/rules/conversion/ and im...: Constantin Asofiei
01:15 AM Conversion Tools Feature #1674: remove unreferenced, non-shared variables: Check for any node that has a refid to the var def, but there are cases that are not real source code references so t... Eric Faulhaber
01:13 AM Conversion Tools Feature #1674 (New): remove unreferenced, non-shared variables: Eric Faulhaber
01:00 AM Database Feature #1669: add support for additional database methods: Need customer report results to make a list of needed methods. Eric Faulhaber
12:59 AM Database Feature #1669 (Closed): add support for additional database methods: Eric Faulhaber
12:59 AM Database Feature #1668: add support for additional (non-dynamic) database attributes: Need customer report results to make a list of needed attributes. Eric Faulhaber
12:58 AM Database Feature #1668 (Closed): add support for additional (non-dynamic) database attributes: Eric Faulhaber
12:55 AM Database Feature #1667: improve support for "FOR EACH FIRST" and similar cases: Currently, instances of looping queries like FOR EACH...FIRST... are converted to CompoundQuery. This works logicall... Eric Faulhaber
12:50 AM Database Feature #1667 (New): improve support for "FOR EACH FIRST" and similar cases: Eric Faulhaber
12:49 AM Database Feature #1666: add support for mixed-direction indexes: First version of P2J was built on an older version of PostgreSQL, which did not support indexes with multiple columns... Eric Faulhaber
12:43 AM Database Feature #1666 (Closed): add support for mixed-direction indexes: Eric Faulhaber
12:42 AM Database Feature #1665: automate import process: Today the data import process is well documented, but it contains many manual steps and is thus error prone. This pr... Eric Faulhaber
12:38 AM Database Feature #1665 (Closed): automate import process: Eric Faulhaber
12:37 AM Database Feature #1664: data import improvements: * performance improvement: re-architect threading to distribute work in a more granular way (preserve prioritization... Eric Faulhaber
12:33 AM Database Feature #1664 (New): data import improvements: Eric Faulhaber
12:31 AM Database Feature #1663 (Closed): test/debug case-sensitive field support: Eric Faulhaber
12:30 AM Database Feature #1662: runtime support for table parameters: Needs research: is it just a handle or is there some special DB processing needed at the transition point? Eric Faulhaber
12:30 AM Database Feature #1662 (Closed): runtime support for table parameters: Eric Faulhaber
12:26 AM Database Feature #1661: support case-sensitive fields in indexes: This will require changes to:
* the DDL index generation code (don't emit UPPER function in CREATE INDEX statement);
... Eric Faulhaber
12:21 AM Database Feature #1661 (Closed): support case-sensitive fields in indexes: Eric Faulhaber
12:20 AM Database Feature #1660: add conversion and runtime support for OF keyword use in a CAN-FIND: Actually not sure if this currently is supported or not (most likely not). Need some test cases to determine the lim... Eric Faulhaber
12:16 AM Database Feature #1660 (Closed): add conversion and runtime support for OF keyword use in a CAN-FIND: Eric Faulhaber
12:14 AM Database Feature #1659: add support for field exclusion/inclusion lists in queries: This feature supports a performance optimization in which -- for read-only usage of a table -- the query's results on... Eric Faulhaber
12:09 AM Database Feature #1659 (New): add support for field exclusion/inclusion lists in queries: Eric Faulhaber
12:08 AM Database Feature #1658: improve database trigger support: * runtime support for TRIGGER PROCEDURE (DELETE, WRITE, CREATE), DISABLE TRIGGERS, ON FIND OF table;
* need report c... Eric Faulhaber
12:06 AM Database Feature #1658 (Closed): improve database trigger support: Eric Faulhaber

10/21/2012

06:13 PM Database Feature #1657: add Oracle support: This task will require:
* using Oracle's Java support to run our Java UDFs inside the server process;
* creating ... Eric Faulhaber
06:11 PM Database Feature #1657: add Oracle support: This task is on hold until a customer requires it. Eric Faulhaber
06:11 PM Database Feature #1657 (Hold): add Oracle support: Eric Faulhaber
06:09 PM Database Feature #1656: add Microsoft SQL Server support: We need to be able to run Java UDFs inside the database server process. This task will require:
* building an infra... Eric Faulhaber
05:51 PM Database Feature #1656 (Closed): add Microsoft SQL Server support: Eric Faulhaber
05:49 PM Database Feature #1655: add conversion and runtime support for certain dynamic database attributes and met...: Need to run customer reports to generate exact list of methods and attributes required. Eric Faulhaber
05:44 PM Database Feature #1655 (Closed): add conversion and runtime support for certain dynamic database attribute...: Eric Faulhaber
05:42 PM Database Feature #1654: add conversion and runtime support for dynamic buffer creation and cleanup: This feature will require dynamic (runtime) conversion of the CREATE BUFFER statement. Eric Faulhaber
05:42 PM Database Feature #1654 (Closed): add conversion and runtime support for dynamic buffer creation and cleanup: Eric Faulhaber
05:41 PM Database Feature #1653: add conversion and runtime support for dynamically prepared queries: This feature will require dynamic (runtime) conversion of the CREATE QUERY statement. Eric Faulhaber
05:26 PM Database Feature #1653 (Closed): add conversion and runtime support for dynamically prepared queries: Eric Faulhaber
05:40 PM Database Feature #1652: add conversion and runtime support for dynamically prepared temp-tables: This feature will require (at minimum) dynamically:
* converting the statement at runtime into some representation o... Eric Faulhaber
05:23 PM Database Feature #1652 (Closed): add conversion and runtime support for dynamically prepared temp-tables: Eric Faulhaber
05:24 PM Database Feature #1651: add support for dynamic database features: Requires binary TRPL as a pre-requisite, since conversion will have to occur at runtime, on the fly. Eric Faulhaber
05:22 PM Database Feature #1651 (Closed): add support for dynamic database features: Eric Faulhaber
01:11 PM Base Language Feature #1650 (Closed): process launching support for Windows (JNI library changes and any associ...: Greg Shah
01:10 PM Base Language Feature #1649: implement Windows environment/registry access: Priority features: GET-KEY-VALUE, PUT-KEY-VALUE, USE, LOAD, UNLOAD
The COLOR and FONT options to PUT-KEY-VALUE do no... Greg Shah
01:09 PM Base Language Feature #1649 (Closed): implement Windows environment/registry access: Greg Shah
01:09 PM Base Language Feature #1648 (Closed): review all filesystem support (runtime) on Windows and fix/resolve any is...: Greg Shah
01:07 PM Base Language Feature #1647 (Closed): implement an option for SETUSERID and USERID to be backed by a replacemen...: Greg Shah
01:06 PM Base Language Feature #1646 (Closed): implement BASE64-ENCODE/BASE64-DECODE built-in functions: Greg Shah
01:03 PM Base Language Feature #27 (WIP): implement a compatible ENCODE built-in function: Greg Shah
01:00 PM Base Language Feature #1645: implement web services support: Priority work: implement all usage of the server object handle in regards to connecting to a web service.
Most of th... Greg Shah
12:29 PM Base Language Feature #1645 (Closed): implement web services support: Greg Shah
12:01 PM Base Language Feature #1644: implement SOAP support: Priority features:
Statements:
CREATE-SOAP-HEADER
CREATE-SOAP-HEADER-ENTRYREF
ATTRIBUTES:
SOAP-FAULT-STRING
ERRO... Greg Shah
12:00 PM Base Language Feature #1644 (Closed): implement SOAP support: Greg Shah
11:59 AM Base Language Feature #1643 (Closed): implement any missing DELETE OBJECT usage: Greg Shah
11:51 AM Base Language Feature #1641: implement SAX XML support: Priority features:
CREATE-SAX-READER; CREATE-SAX-WRITER; METHODS: get-value-by-index(), start-element(), end-eleme... Greg Shah
11:51 AM Base Language Feature #1641 (Closed): implement SAX XML support: Greg Shah
11:48 AM Base Language Feature #1640: implement DOM XML support: Priority features:
CREATE-X-NODEREF; CREATE-X-DOCUMENT; ATTRIBUTES: NAME, ATTRIBUTE-NAMES, OWNER-DOCUMENT, NUM-CHI... Greg Shah
11:47 AM Base Language Feature #1640 (Closed): implement DOM XML support: Greg Shah
11:46 AM Base Language Feature #1639: implement socket support: Highest priority features:
CREATE SOCKET
socket object methods:
CONNECT()
CONNECTED()
DISCONNECT()
READ()
SET-READ-... Greg Shah
11:46 AM Base Language Feature #1639 (Closed): implement socket support: Greg Shah
11:42 AM Base Language Feature #1638: implement Java access to converted appserver code (must be a simple replacement fo...: One approach: based on a list of interfaces (hints), create a set of Java interfaces that can be used via our net pro... Greg Shah
11:41 AM Base Language Feature #1638 (Closed): implement Java access to converted appserver code (must be a simple repla...: Greg Shah
11:24 AM Base Language Feature #1636 (Closed): implement peristent trigger support: Greg Shah
11:22 AM Base Language Feature #1635: implement MEMPTR/RAW support: The following have highest priority:
Built-in Functions: get-long(), get-pointer-value()
Statements: put-long, put-s... Greg Shah
11:21 AM Base Language Feature #1635 (Closed): implement MEMPTR/RAW support: Greg Shah
11:14 AM Base Language Feature #1634: implement full native library (.so or DLL) support: Provide a replacement for the Progress 4GL native API registration (PROCEDURE EXTERNAL) and calling mechanism. Utili... Greg Shah
11:07 AM Base Language Feature #1634 (Closed): implement full native library (.so or DLL) support: Greg Shah
10:38 AM Base Language Feature #1632 (Closed): implement _MSG() undocumented built-in function: Greg Shah
10:37 AM Base Language Feature #1631 (Closed): implement support for LANDSCAPE/PORTRAIT in I/O statements: Greg Shah
10:36 AM Base Language Feature #1630 (Closed): implement support for UNBUFFERED in I/O statements: Greg Shah
10:15 AM Base Language Feature #1628 (Closed): fix any incompatibilities or missing features of NO-ECHO support: Greg Shah
10:14 AM Base Language Feature #1627 (Closed): support for empty EXPORT statements: Greg Shah
09:55 AM Base Language Feature #1626 (Closed): implement OS-DIR support as an INPUT stream: Greg Shah
09:54 AM Base Language Feature #1625 (WIP): implement OUTPUT TO PRINTER on Windows: Greg Shah
09:53 AM Base Language Feature #1624 (Closed): add support for PUT CONTROL: Greg Shah
09:52 AM Base Language Feature #1623 (Closed): refine I/O support to resolve incompatibilities or missing features: Greg Shah
09:46 AM Base Language Feature #1622 (Closed): refine HANDLE support to resolve incompatibilities: Greg Shah
09:36 AM Conversion Tools Feature #1519: report improvements: Refine reports that are too broad today. For example, reports such as "potential sockets usage" include language sta... Greg Shah
09:34 AM Conversion Tools Feature #1519: report improvements: Add specific reports for:
* dynamic/unspecified EXTENT usage
* EXTENT parameter usage
* detect when the same HANDLE... Greg Shah
09:28 AM Base Language Feature #1621 (Closed): implement dynamic/unspecified EXTENT support: Greg Shah
09:27 AM Base Language Feature #1620 (Closed): implement EXTENT parameter support: Greg Shah

10/20/2012

10:01 AM Base Language Feature #1615: implement RCODE-INFO system handle: This system handle is *almost* too implementation specific to support. But if the usage is important, the features c... Greg Shah
09:56 AM Base Language Feature #1615 (Rejected): implement RCODE-INFO system handle: Greg Shah
09:37 AM Base Language Feature #1613: finish FILE-INFO system handle support: Implement the following:
FILE-INFO:FILE-TYPE (SMLP are not supported in P2J right now, there are limitations in Ja... Greg Shah
09:34 AM Base Language Feature #1613 (Closed): finish FILE-INFO system handle support: Greg Shah
09:34 AM Base Language Feature #1612 (Closed): finish SESSION system handle support: Greg Shah
09:32 AM Base Language Feature #1611: implement QUOTER utility: The QUOTER utility in the 4GL is a separate executable that is part of the Progress runtime software BUT it is called... Greg Shah
09:26 AM Base Language Feature #1611 (Closed): implement QUOTER utility: Greg Shah

10/19/2012

01:06 PM Base Language Feature #1591: implement QUOTER built-in function: Yes, please implement the QUOTER() built-in function NOT the QUOTER utility. Greg Shah
11:21 AM Base Language Feature #1591: implement QUOTER built-in function: *Quoter function*
Converts the specified data type to CHARACTER and encloses the results in quotes
when necessary.
Th... Costin Savin
10:48 AM Base Language Feature #1608: implement full appserver support (from 4GL clients only): Implement the following:
- appserver dispatcher/thread pool
- handle context issues
- startup/shutdown procedures (... Greg Shah
10:43 AM Base Language Feature #1608 (Closed): implement full appserver support (from 4GL clients only): Greg Shah
10:10 AM Base Language Feature #1607: implement full named events support: The following support is needed: PUBLISH, SUBSCRIBE, UNSUBSCRIBE, parameter passing processing, chaining, super-proce... Greg Shah
10:06 AM Base Language Feature #1607 (Closed): implement full named events support: Greg Shah
10:05 AM Base Language Feature #1606: implement persistent procedures/super procedures: The following support is needed: RUN PERSISTENT, DELETE PROCEDURE/OBJECT, RUN IN, FUNCTION IN, DYNAMIC FUNCTION/DYNAM... Greg Shah
10:03 AM Base Language Feature #1606 (Closed): implement persistent procedures/super procedures: Greg Shah
09:58 AM Conversion Tools Feature #1604 (New): enhance name conversion to support malformed frame names and labels: Greg Shah
09:58 AM Conversion Tools Feature #1603 (New): enhance name conversion to support internal procedure names that contain a '...: Greg Shah
09:51 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Running the tests in 4GL showed the following:
# entire DISPLAY columns... clause is optional. If it is missing, "s... Constantin Asofiei
08:42 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Another viewpoint to the naming issue. Theoretically the NTFS is case-sensitive. In XP we can turn this feature on ac... Eugenie Lyzenko
08:18 AM Database Feature #1602 (Closed): support BigDecimal in PLJAVA indexOf() implementation: Greg Shah
08:17 AM Database Feature #1601 (Closed): implement NUMERIC type in relational database schemas: Greg Shah
08:15 AM Base Language Feature #1600 (Closed): provide a conversion option to emit decimal literals using a string liter...: Greg Shah
08:13 AM Base Language Feature #1599 (Closed): shift EXP implementation (MathOps.pow()) to BigDecimal: Greg Shah
08:11 AM Base Language Feature #1598 (Closed): shift LOG implementation (MathOps.log()) to BigDecimal: Greg Shah
08:11 AM Base Language Feature #1597 (Closed): shift SQRT implementation (MathOps.sqrt()) to BigDecimal: Greg Shah
08:07 AM Base Language Feature #1596 (Closed): complete big decimal implementation: Greg Shah

10/18/2012

05:11 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The conversion has been completed in Windows. But the compilation can not be performed due to the following name gene... Eugenie Lyzenko
12:10 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: Greg, some considerations about names
> ... But good Java names CANNOT contain hyphens. But we get away with camel... Eugenie Lyzenko
10:30 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Regarding your questions in update 5 above:
> 1. By "conversion for the pilot project broke with the update" you m... Eric Faulhaber
04:32 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: I've found the problem, it was caused by the uast/progress.g changes related to "optional column_spec clause" for a d... Constantin Asofiei

10/17/2012

12:51 PM Base Language Feature #1591: implement QUOTER built-in function: *QUOTER utility specifications:*
The QUOTER utility formats character data in a file to the standard format so it can... Costin Savin
11:00 AM Base Language Feature #1591 (WIP): implement QUOTER built-in function: Costin Savin
11:35 AM Base Language Feature #1590: implement PROPATH assignment: Attached proposed update for the issue Costin Savin
08:42 AM Base Language Feature #1590: implement PROPATH assignment: ... Greg Shah
08:17 AM Base Language Feature #1590: implement PROPATH assignment: Obtained the following rules settings that will convert the code according to the spec:... Costin Savin
09:53 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The root cause for src\syman\train2\rst01.p issue has been found. Take a look at pattern/customer_specific_annotation... Eugenie Lyzenko
09:52 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Constantin Asofiei wrote:
> Greg/Eric,
>
> A few questions and findings:
> 1. By "conversion for the pilot proje... Constantin Asofiei
09:38 AM Conversion Tools Feature #1579: review and merge 12/2011 conversion fixes into main P2J code base, regression test...: Greg/Eric,
A few questions and findings:
1. By "conversion for the pilot project broke with the update" you mean ... Constantin Asofiei
04:55 AM Conversion Tools Feature #1579 (WIP): review and merge 12/2011 conversion fixes into main P2J code base, regressio...: Constantin Asofiei
01:03 AM Database Feature #1595: add conversion and runtime support for DBPARAM() built-in function: Conversion support will be added in builtin_functions.rules. Should map to a new static method in @ConnectionManager... Eric Faulhaber
12:54 AM Database Feature #1595 (Closed): add conversion and runtime support for DBPARAM() built-in function: Eric Faulhaber
12:53 AM Database Feature #1594: add conversion and runtime support for CURRENT-CHANGED() built-in function: Will require conversion support in builtin_functions.rules and runtime support in RecordBuffer. Possibly will requir... Eric Faulhaber
12:47 AM Database Feature #1594 (Closed): add conversion and runtime support for CURRENT-CHANGED() built-in function: Eric Faulhaber
12:45 AM Database Feature #1593: add conversion and runtime support for TO-ROWID() built-in function: Both @TO-ROWID(rowid-string)@ and the inverse/complementary use of @STRING(ROWID(record))@ must be supported.
The ... Eric Faulhaber
12:01 AM Database Feature #1593 (Closed): add conversion and runtime support for TO-ROWID() built-in function: Eric Faulhaber
12:00 AM Database Feature #1592 (Closed): implement additional database built-in functions: Eric Faulhaber

10/16/2012

07:07 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: > I understand. I can see that some people would want the converted code to have the proper Windows line termination ... Eugenie Lyzenko
05:31 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: ... Greg Shah
05:31 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: ... Greg Shah
05:28 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: ... Greg Shah
05:27 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: In regard to the case insensitive filename problem in Windows:... Greg Shah
05:14 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: In regards to the exception, this 4GL code:
h = query q:handle.
brws:query in frame fRoster = h.
/*h... Greg Shah
12:17 PM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The news/more findings from Windows conversion process.
I have searched the results for syman/train2/rst01.p conve... Eugenie Lyzenko
05:01 PM Conversion Tools Feature #1520 (Closed): design gap analysis approach: Greg Shah
05:01 PM Conversion Tools Feature #1520: design gap analysis approach: 1. Should this be inclusive or exclusive?
- inclusive means that we define exactly what is supported and by defaul... Greg Shah
02:40 PM Conversion Tools Feature #1520 (WIP): design gap analysis approach: Greg Shah
02:38 PM Base Language Feature #1590: implement PROPATH assignment: Yes, you're right. The assignment version of this must be put in convert/assignments.rules. Search on prog.kw_fr_va... Greg Shah
01:29 PM Base Language Feature #1590: implement PROPATH assignment: > <rule>oldtype == prog.kw_propath
> <action>methodTxt = "EnvironmentOps.getSearchPath"</action>
> <rule>parent.typ... Costin Savin
04:49 AM Base Language Feature #1590 (WIP): implement PROPATH assignment: Costin Savin
02:30 PM Feature #1570 (Closed): create a build.xml ANT script to properly build the chemtutor.jar for the...: Greg Shah
01:17 PM Feature #1570: create a build.xml ANT script to properly build the chemtutor.jar for the chemtuto...: Removed this task and used the p2j.jar that includes testcases directory instead Costin Savin
08:57 AM Feature #1570: create a build.xml ANT script to properly build the chemtutor.jar for the chemtuto...: Can p2j-deploy-exclude-testcases be removed from build.xml now? I assume so, since that was the idea of putting chem... Greg Shah
10:27 AM Conversion Tools Feature #1530: update the "Other Customization" chapter of the Conversion Handbook to add a refer...: The changed other_customization.odt file is in bazaar. Constantin Asofiei
10:25 AM Conversion Tools Feature #1529: move customer_specific_conversion.rules into p2j/rules/conversion/ and improve/ref...: Sent final updates for review (for both P2J and TIMCO projects). The other_customization.odt and managing_changes.od... Constantin Asofiei
10:22 AM Conversion Tools Feature #1531: update the "Techniques for Integrating Java Code into Reconverted 4GL Code" chapte...: The changes are in bazaar. Constantin Asofiei
10:20 AM Feature #1528 (WIP): write "Directory Access and Customization" chapter in the P2J Developer Guide: An initial version of the directory_access.odt file was added to the repository. Constantin Asofiei
09:05 AM Feature #1572 (Closed): using p2j/testcases/simple/* as a guide/template, please create a runtime...: Greg Shah
09:03 AM Feature #1572 (New): using p2j/testcases/simple/* as a guide/template, please create a runtime co...: Greg Shah
08:59 AM Feature #1572 (Review): using p2j/testcases/simple/* as a guide/template, please create a runtime...: Greg Shah
09:04 AM Feature #1571 (Closed): create a bash script to automate the process of creating an H2 database f...: Greg Shah
08:58 AM Feature #1578: add a readme.html to the chemtutor project: Please remove references to p2j-deploy-exclude-testcases if it is no longer needed. Greg Shah

10/15/2012

12:31 PM Conversion Tools Feature #1531 (WIP): update the "Techniques for Integrating Java Code into Reconverted 4GL Code" ...: Constantin Asofiei
12:30 PM Conversion Tools Feature #1530 (WIP): update the "Other Customization" chapter of the Conversion Handbook to add a...: Constantin Asofiei
09:21 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The following line of code causes the exception generated, file train2/rst01.p.cache Line 1409:9
...
brws:quer... Eugenie Lyzenko
08:49 AM Conversion Tools Feature #1565: test the full conversion process on Windows and document all problems that are found: The new set of issues is related to the file separator difference between Linux(/) and Windows(\) inside the conversi... Eugenie Lyzenko

« Previous

Also available in: Atom

Project

General

Profile

FWD » Core Development

Activity

Activity

11/13/2012

11/12/2012

11/11/2012

11/10/2012

11/09/2012

11/08/2012

11/07/2012

11/06/2012

11/05/2012

11/03/2012

11/02/2012

11/01/2012

10/31/2012

10/30/2012

10/29/2012

10/28/2012

10/27/2012

10/26/2012

10/25/2012

10/24/2012

10/23/2012

10/22/2012

10/21/2012

10/20/2012

10/19/2012

10/18/2012

10/17/2012

10/16/2012

10/15/2012